Lonsdor K518 Program Mazda3 Alexa 2017 Smart Key

Guide to add smart key and program all keys lost on a Mazda3 Alexa 2017 by Lonsdor K518 key programmer via OBD.

Key information:

Chip type: special smart card

Frequency: 433MHz

Pin code: No

Remote generation: smart key programming completed will generate remote automatically

Device to program: Lonsdor K518ISE (English version of K518)

OBD location: Under the steering wheel

19-1
19-2 19-3

1: Add smart key

Connect K518 from Obd2tool.com host with vehicle via diagnostic socket

Select Immobilizer->Mazda->Alexa

Communicating…

K518 read part number

19-4

Turn ignition switch to ON position

19-5

K518 identified key programmed: 2
19-6

Communicating…

Stick the non-registered smart key on the Start button

19-7

Programming…

Automatic model please step on the pedal brake

Manual model please step on the clutch

19-8

Programming…

Identify key programmed: 3

19-9

Turn ignition OFF

All programmed key must perform following operations:

Step on pedal brake, press on Start button with remote key with car logo mark and start turn IGN ON

Turn IGN OFF after 3s

19-10

Program success

19-11

1: All keys lost

Connect K518ISE host with vehicle via diagnostic socket

Select Immobilizer->Mazda->Alexa

Communicating…

K518 read part number

Require at least 2 keys
19-12

Turn ignition ON. If cannot switch ignition on, please press on Cancel button

19-13

Communicating…

Key programmed:3

19-14

Communicating…

19-15

Lonsdor K518ISE identified key programmed: 0

19-16

Turn ignition OFF

19-17

Hold non-registered smart key in hand

19-18

Turn ignition ON

Stick 1st smart key with logo on the Start button

19-19

Programming…

Key programmed:1

19-20

Turn ignition off

Hold non-registered smart key in hand

Turn ignition ON

Stick 2nd smart key with logo on the Start button

19-21

Programming…

Key programmed: 2

19-22

Turn ignition OFF

All programmed key must perform following operations:

Step on pedal brake, press on Start button with remote key with car logo mark and start turn IGN ON

Turn IGN OFF after 3s

19-23
Program success.

19-24

Posted in Auto key Programmer and tagged , , , .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>