Why need Autel MaxiTPMS diagnostic scan tools?

Here most detailed procedure on TPMS sensors market trends, the reason to use Autel MaxiTPMS diagnostic scan tools, the procedure for solving most of the daily TPMS repair scenarios you may encounter, how to use MaxiTPMS TS608 and MaxiTPMS PAD and more. Please proceed to reading following parts.

TPMS sensors market trends?

It has become very difficult for tire shops nowadays to keep up with the dizzying variety of OEM sensors, and even impossible to stock the incredible number of OEM sensors that would be required to cover the market. In addition, the original TPMS sensors with sealed battery generally last for 6-8 years. With a large-scale of sensors in use for six years now, the first wave of battery failure is starting to appear. That means an enormous number of sensors will have to be replaced in the next few year.

Why need Autel MaxiTPMS diagnostic scan tools?

Autel’s MaxiTPMS diagnostic scan tool series come just in time to quite literally save all troubles. The MaxiTPMS system consists of the programmable MX-Sensors that cover both 315MHz and 433MHz radio bands, a professional OBDII TPMS diagnostic tool is able to relearn vehicle ECUs and program the MX-sensors, plus a convenient programming accessory device to perform fast sensor testing and cloning. In short it covers all that is needed to deliver comprehensive TPMS service. The MaxiTPMS series is aimed at simplifying TPMS services to help you solve problems more easily and efficiently, and enhance your profitability.

34-1 34-2

There are 3 basic procedures for solving most of the daily TPMS repair scenarios you may encounter:

1.Activating TPM sensors.
2.Cloning a set of TPM sensors.
3.Creating a new set of TPM sensors.

X-431 Diagun IV FAQ:


1. How to save power?

Please turn off the screen while Launch Diagun IV keeps idle.

Set a shorter standby time.

Decrease the brightness of the screen.

If WLAN connection is not required, please turn it off.

Disable GPS function if GPS service is not in use


2. What should I do in case I forgot the screen lock?

You can set screen lock as pattern or password. If you forgot the password, please consult your device provider or reset your device.

Warning: Resetting may cause data loss. Before use, please make sure important data has been backed up.


3. How to do if the system runs slow?

In this case, please do the followings:

> Check all running applications and stop the unnecessary applications (Steps: Settings -> Apps -> Running -> Tap the desired application and then tap “Stop”).

> Check all installed applications, remove the unnecessary applications (Steps: Settings -> Apps -> Downloaded -> Tap the desired application and then tap “Uninstall”).

If all steps mentioned above are finished and the system still works slowly. Please try to close the system and reboot your X-431 Diagun IV.


4.How to reset X-431 Diagun IV?

Resetting may cause data loss. Before doing so, please make sure important data and information has been backed up.

Do the following to reset Launch diagnostic tool Diagun IV:

1. Tap “Settings” –> “Back & Reset”;

2. Tap “Factory data reset”;

3. Tap “Reset tablet”;

4. Tap “Clear all data” to start resetting until the tool automatically reboots.


Why Autel MaxiSys Pro MS908P?

24-1  24-3
Autel MaxiSys Pro MS908P: Shortcomings

1.The MS908PRO is not suitable for the low-end mechanics as the operational procedures are quite complicated. It mainly targets professionals in Auto-repairing and Garage Shops.

2.It is a high end product and is not affordable to everyone who would want to use.

Why Autel MaxiSys Pro MS908P?

1. Its quad-core processor, the Cortex-A9 Samsung Exynos 1.4 GHz, provides high processing speeds.

2. The compatibility of the device with other add-ons makes it possible to install a language pack.

3. The scanned data is presented as texts and/or graphs.

4. The device is compatible with a large number of vehicles.

5. Android Ice Cream 4.0 on which it runs enables multitasking and quick boot up. Almost 5 times faster than other diagnostic devices.

6. It is light, compact and robust. Therefore, you can carry and work with it anywhere without much hassle.

7. You can share data via Bluetooth and Wi-Fi with other people in your team or print for hard copies.

It’s one of the best Professional Autel Scanners!!


Does Autel Maxisys Pro Suit You?

This diagnostic device is mainly for professionals, those with Garage or Auto Repairing Shops.

It wouldn’t suit you if you are a single car owner. The design is meant to serve many people.

If you are an owner of a garage or car shop Autel Professional OBD2 MS908P, it could be of great help to you in getting things done fast.


Is It Worth Buying Then?

Autel MS908P is an all round and powerful tool that I would definitely recommend to any professional mechanics in the auto-repairing business.

It can a long way in easing up and increasing efficiency in your engine diagnostics from all the features mentioned. The returns are a guarantee.

It is a current tool that is compatible with most vehicles models. With its ‘Future Proof’ feature, it is to remain relevant with new vehicle models being released.

Autel are very good with after-sale services and you are assured of getting updates every time they are done.
So, you’ve got what you need about Autel Diagnostic Maxisys Pro MS908P.
Take one for your professional business!!

Autel Maxisys Pro MS908P Vehicle Diagnostics Scanner ECU Coding and J2534 Programming


The Autel Maxisys Pro MS908P Diagnostic Scanner utilizes an ultra-powerful A9 quad-core, 1.40GHz processor that offers a 50% increase
in speed versus competing products,a 9.7 LED screen with a 1,024 x 768 resolution capacitive touch screen, a 32 GB Solid State
hard drive,the revolutionary multitasking Android Operating System and comprehensive OE-level vehicle coverage


The Advanced Automotive Diagnostic Tool includes the J-2534 reprogramming box and special MaxiSYS Pro software needed for shops
and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks.
It comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian & European vehicles (J-2534 manufacturer
updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

* Free 1 year software update via internet on autel official website
* 9.7 LED screen with a resolution of 1,024 x 768 capacitive touch screen
* Utilizing an A9 quad-core 1.40GHz processor that offers 50% increase in speed versus competing products
* Support WIFI: Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
* Support Bluetooth: The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth
* Vehicle Coverage: Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes

Please Pay Attention : There is no chang′an 3 connector in Autel Scanner Maxisys pro Box. And benz-14 pin connector is only for the European version.

Three steps to add Mitsubishi Pajero new key by SKP900

This blog is going to tell you SKP-900 key programmer can add new key for Mitsubishi Pajero in just one minute! It’s amazing and please read down below steps.

Step1. Start SKP-900 SKP900 then choose “Immobilizer”→ “Mitsubishi”



Step2. Choose “System Type” and “Type 1” and “IMMO System”. Next is to turn on the ignition.


Step3. Choose “Key Adapt” and input the authorize code.

9-5 9-6

It will show “Key Program Success”. Press YES button and insert the new key in 5 seconds then turn ignition on.

9-7 9-1

And Auto Key Programming SuperOBD SKP900 now make new key for Mitsubishi Pajero successfully in 1 minute!

Superobd SKP900 programs smart remote Nissan Sylphy 2013 year

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.


Calculate Pin code and then program smart remote key


1.This is smart remote key …


2.Turn ignition on


3.Open OBD2 Programmer Superobd SKP900, come to menu then choose “Nissan” under IMMOBILIZER.


4.Select “New Structure”.


5.Select “Smart key”, loding…




7.Get message “Choose OBDII adapter Yes to continue”, turning on then press YES.

8.Read BCM code


9.Insert key and turnning on “Yes” to continue


10.Read out BCM code

11.Use Nissan Calculator to find Pin code.


12.Read out PINCODE: 2166 (cause our car after 2009 year) by Nissan Calculator


13.Use pin code: 2166. Back to “Function Selection” then select “Activate Steeling Lock”, press

“Yes” button.


14.Get message “If keyless want activate steering wheel, first turn IGN off “Yes” Continue.

15.All keyless will be deleted.


16.Enter Pincode 2166


17.Check INPUT VALUE 2166 “Yes” OK “No” Return.


18.Activate success wait new keyless.


19.Key number 1 and number 2


20.Register KEY Number 1, put key number 1 on Smart button and press 1 time. Security light blink 4 times. Key LED steady. Press smart button to off.


4-21 4-22 4-23

21.Put key number 2 on Smart button and press 1 time.Security light blink 4 times.Turn IGN off.

22.Use key number 1 turn on again. Turn IGN off. Press brake pedal then press to start.

Engine can start. Turn IGN OFF. Open driver door and close, Key LED blink 5 times.


23.Test remote, it can work.


How to solve the problem that BMW Icom A2 A3 host can’t be connected?

Aftre the BMW ICOM host is connected to the car via a 16PIN connector, and the other side is connected to the computer via a network cable. Your BMW ICOM lan and system lights will light up. As follows:图片1

But at this moment,the host can’t be found in the computer.As follows:


When meeting the problem,please update your BMW ICOM firmware as the following method:

1.Please connect BMW ICOM to the computer vith network cable and power on the BMW ICOM with a 12V power adapter.

2.Open the website address IE browser, username:root   password:NZY11502.

3.Click the “update firmware”,it will show ICOM firmware version information.

4.Choose the file ICOM-BootImage-01-11-01.bin,set image type to SYSTEM,click “Send the file”.

5.When shows “Write the image file to the flash?”,click “Yes”,then ICOM light turns red.

6.When shows “The SYSTEM IMAGE update was successfull”,click “Update Firmware”.

7.Choose the file ICOM-ApplicationImage-01-15-01.bin,set image type to APPLICATION.Click “Send the file”.It will takes a few minutes because of a little large file.

8.When shows “Write the image file to the flash?”,click “Yes”,then the ICOM light turns red for the second time.

9.It is all normal,click “reboot”.


After finishing these steps,please connect again,the ICOM host will be found in the computer,as follows:


SKP900 Key Programmer Land Rover All Key Lost Car List

SuperOBD SKP-900 key programmer is advised for both experienced locksmith and car owners. It supports program Land Rover key when all key lost, many other brands as well. This blog will show you which models all key lost SKP900 support and how to do.

SKP900 Land Rover All Key Lost Car List:

SKP900 Support All Key Lost for These Cars (Tested):

2010-2015 Land Rover Discovery IV (L319)

2010-2013 Range Rover sport (L320)

2014-2015 Range Rover sport (L494)

2010-2012 Range Rover mark III (L322)

2013-2015 Range Rover mark IV (L405)

2012-2015 Range Rover Evoque (L538)

2012-2014 Land Rover freelander II (L359)

2010-2013 Jaguar XF (X250)

2010-2014 Jaguar XJ (X351)

How SKP-900 program key for Range Rover sport (L494) when lost all key?

First, Choose “Keyless Program”


It will show “Key quantity: 1” then press “Enter” button to continue.


After that press the “Unlock” button of new transponder key quickly in 5 seconds.


Then follow tips to repeat press key “Unlock” button.

It will show “Detected key place: 2”, press “Enter” button to continue.


Now Auto Key Programmer SuperOBD SKP-900 successfully add new transponder key for Range Rover sport (L494) lost all key.


This is from www.obd2tool.com: Best car key tools for sale website technical support: SKP900 Key Programmer Land Rover All Key Lost Car List

MaxiTPMS TS608 Service Tablet Reviews


As the first comprehensive TPMS & Diagnostic tool in the market, Autel TS608 provides you with superior experience in TPMS health check, sensor programming, TPMS relearn, all system diagnostics as well as special service functions. Equipped with a 7-inch touch screen with 1024 * 600P resolution and a VCI mini for wireless communication with the test vehicle, powered by the quad-core Cortex-A9 processor for smooth operation and featured by advanced TPMS & Diagnostic technology, MaxiTPMS TS608 is setting new standards for TPMS service tools.


Following is the MaxiTPMS TS608 Service Tablet Reviews.

1.I am actually a mechanic at Midas and use this daily

I am a mechanic at Midas, i use this tool almost on a daily basis. It truly is a all in one scan tool it does take a minute to learn how the functions are set up and used. I rated this as five stars because it is an excellent scan tool but there was one thing I disliked but if you read the fine print they disclose it Which is the scan tool can only reprogram program Autel TPMS sensors, Any and all others will not work. You can still wake up sensors and do relearns on all make and models I have tried atleast. The universal ones that my shop buys Will not work but this is still a very good scan tool for all purpose functions. I highly recommend looking up the three or four tutorial videos on YouTube about the scan tool. They are very informative about this tool and everything in the film has been correct. I have use this tool on at least 30 or so different vehicles for all different reasons and have not had any issue with it. Depending how good your Wi-Fi is it will also double as a tablet/laptop. I compared it to a Nother text $2,500 Snap-On scan tool and mine can do everything his can. Plus you get the wireless functions that are awesome.

2.All around nice service tool

Recent purchase. These are my early impressions of the tool. All around nice service tool. Comes in a nice quality case that securely holds the tablet, manual and wires in place. The tablet itself has a nice screen and rugged padding for protection that looks like it will hold up over time in shop use. Does everything it says it will do. Full autel obd2 scanner service TPMS tool. Reads/erases codes and reads/graphs live data. Performs automated system tests. Resets service lights and performs maintenance procedures. I even hooked it up to a hybrid vehicle just to see if it would access and test all modules, and it worked beautifully. The interface is straightforward and easy to use.

Now for the bad. My only complaint with the tool is the poor English translations. Some statements in the manual and on the tool can be confusing due to the translation from Chinese. My feeling is that when companies sell internationally, translations to other languages should be done properly.

All around I am happy with the purchase. For the money, I don’t think there is a more complete or quality system on the market. You not only get a full service TPMS tool, but a complete basic diagnostic scan tool. Fix the translation issues and this would easily be a 5 star product.

3.better recording, better information

If your looking for a tpms tool, get this one, if your looking for a scan tool under $1000, get this one. I still grab my modis ultra for diagnostics, it has faster live data, faster loading screens, better recording, better information, and a built in lab scope, but this is a solid backup, I take it with me in the weekends from OBD2TOOL, it’s our only tpms and oil service light tool, and worth more than it’s price.

4.Works ok for home use. Nice to relearn your car the new TPMS sensor locations after tire change/rotation.

This is not a professional tool. Reason for this “Downgrade” is that it only programs Autel’s own TPMS sensors. Easy to use OBD II bluetooth to learn your car new sensor locations, but not able to “Start” other brand’s sensors, like Herth+Bus sensors.