Why should buy Xentry connect

Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.can work on windows xp, win7/8/10 system.

MB-SD-C5-SD-Connect-Compact-5-Star-Diagnose-for-Cars-&-Trucks-1

Xentry Connect C5 Benz SD Connect DoIP Wifi MB Star C5 Xentry Tab Kit Diagnosis Multiplexer
Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
The tool we sell do not include the xentry tab, you can equip one yourself or choose other laptop, it is just as a display, no special requirement.
Xentry Connect (VCI+) Technical Parameters:
1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ
The way to connect: support wireless connection via 1000M workshop switches, also support wired connection.

What the difference on diagnostic systems based on Xentry Connect from other equipment used to diagnose Mercedes cars?

What are its distinguishing features?

Hardware, despite the similarity of many solutions with multiplexers SD Connect –
but the different All diagnostic software is loaded into the Xentry Connect multiplexer itself.
The management software can be installed on any computer with Windows 7 – 32-bit or Windows 8 – 32-bit and serves only for communication with the multiplexer

The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy Xentry connect

After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.

Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SD Connect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1,
somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.

Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.

So , we suggest buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .
After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Package List:
1pc x C5 Multiplexer (new C5 case)
1pc x OBDII 16PIN Cable
1pc x Lan Cable

How to change W222 speed meter and temperature from F to C

I have a Mercedes-Benz w222 manufactured in the USA. I want to convert the radio and speed meter and temperature from F to C.

It means change speed meter from mph to Km/h , and command (Head Unit) from US to ECE , it will via xentry?

I am new at this field. Any one know how to change it be xentry or vediamo ?
I have SD Connect C5 and  Dell D630 Star Diagnostic Tool With Vediamo V5.00.05.

Ps. here is the ECU chassis number :WDDUG8CB9EA009893

Solution by experienced MB technician:

ECU version is required so can get the steps. They vary from car to another.

According to your chassis Number, this is the ECU details:

Diagversion: IC222_E007_2_Muster

Steps Via Vediamo
1- go to CBF FILE (IC222)
2- Select ECU Variant (IC222_E007_2_Muster)
3- Tab Coding then Variant Coding
4 Coding window will open up

For the temperature C Scroll down o Anzeigeeinheit Temperatur (Unit_Temp) and Choose C.

All other Functions are in the same window

Steps Via Xentry
After reading the car go to the ECU Called IC- Instrument Cluster (A1)
Then choose Author data then click on alle_Codierungen. on the right side choose whatever coding you want to change. It should do if the Star Diagnose function is available.

How to use 2017.12 MB Star C5 hard disk and how to update Star C5

MB STAR C5 moveable hard disk is used for containing Xentry DAS, please do not use it as a computer system hard disk.

39-1

Here two tips to follow.

Option 1. you use C5 disk on your own computer. Tip: advice you not rework it or dismantle it and plug it to the computer to modify the data.

Option 2. you buy the extra computer together with MB Star C5, then you are advised to prepare one blank hard disk for system installation because the computer you bought doesn’t come with hard disk.

39-2

How to update DoIP Xentry Connect C5?

Usually you are required to send back the Benz diagnostic tool MB Star C5 hard disk for update unless the engineers can make out the updating software for download.

Attach one picture which shows the hard disk location in the C5 mux.

How to SD connect C4 LAN & WiFi Configuration

Topic: How to configure SD connect C4 LAN & WiFi to solve DAS fault (1.1)-1.501.9500.

Tool: a clone SD Connect C4

Software: 2011/3 Xentry

Status: I’ve started up SDNC to see if the connection is okay, and it turns green when I connect the multiplexer via LAN, but when I try the wifi it stays red. It can also read out some data from the multiplexer so I am assuming the the multiplexer is working fine too

Error: If I connect it to a car, DAS keeps popping up the (1.1)-1.501.9500 error (as I understand that must be some kind of communication problem). The car’s wiring is fine as KTS 520 can communicate with it.

Photos:

See the ceaser test post results

24-1

see the error message DAS gives

24-2

SDConnect toolkit says that my mux is available, but when I click on the button in the middle I get an error message, with an error code 750. That button is supposed to be for searching for multiplexers. This kind of gives me the impression that something isn’t quite working right :S
In the toolkit admin, it displays a serial number, says the mux is available. See in the attachments.

24-3 24-4 24-5 24-6 24-7

Solution:

It’s working!!! (At least it’s working via LAN, have not tried WLAN yet.)

I can’t believe it :O

Changed value in cal.ini to PART_W (to be exact, didn’t need to change it, it was PART_W, just left it that way :P).

As for the rest of the instructions, I haven’t been able to follow them exactly. I also got a vid with instructions and it’s a little bit different (I’ll post it here if anyone needs though). For example the LAN IP address is 172.29.127.112, but it seems to be working that way. Also I haven’t been able to configure the “road WLAN”, because it doesn’t matter what I enter into the “key” field, it keeps saying that the key cannot be divided by 2 and therefore it is not hexadecimal

Hope this isn’t going to hinder my chances of using WLAN…

But I’m going to find out in a few anyway.

EDIT: Also tried with LAN IP: 172.29.127.119, it doesn’t make a difference. MB SD Connect Compact 4 works with both IP-s.

Damn….I clicked on the “Delivery condition” button in the SDconnect toolkit, and now I cannot turn on the WLAN on SDconnect. I think it wrote something into the MUX’s software :S

The LAN connection still works though, so the MUX is not blocked yet luckily….

Look here: Mercedes Star Diagnostic SD Connect Compact 4 LAN & WIFI configuration

SD connect C4 LAN configuration

24-8 24-9 24-10 24-11 24-12

24-13 24-14
SD connect C4 WIFI configuration

24-15 24-16 24-17 24-18 24-19 24-20 24-21 24-22

MB Star Diagnosis Coding Out ABC on Mercedes R230 Cars

MB STAR Diagnostic Tools software can code out ABC, here is the example on code out Mercedes SL65.
NOTE : the instruction here only for R230s (not any W215, W216, W220, W221)

To do this, you need a MB Star diagnostic SD Connect C4 with Developer mode. Hook up SD Connect diagnostic system to your car and when it reads your car, select Control Units, pick Information and Communication and you will see ICM :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-1.jpg

After ICM, you will see Control Unit Adaptions :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-2.jpg

From there, choose the year of your model :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-3.jpg
From there, select Special Equipment

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-4.jpg

Select ABC :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-5.jpg

Then go to the drop down tab and change it from PRESENT to NOT PRESENT, and click F3.
After that, turn off the car, with the doors closed.
Wait 1-2 mins and start the car back up (no more ABC codes and no white or red lights).

Why Choose China Brand SKP-900 car key programmer

skp 900 hand held obd2 auto key programmer

When talk about locksmith tools, tokens problem cannot be ignored. Skp900 is with 50tokens, if use up, it is free of charge and can be added on the official website of SKP900 Key Programmer.

Here OBD2 take skp 900 key programmer for example.
SKP-900 is a portable OBD2 Key Programmer rather than those with big size and heavy weight, convenience is pursuit by more and more people. Besides, some car key programmer covers one car makes like BMW AK500, but skp900 key programmer is available with Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, and Hyundai, etc.

Why Choose China Brand SKP-900 car key programmer:
1) 100% original programmers. Made by china company.
2) Software is updated online for lifelong. New software will release on every month.
3) Universal programmer. Able to programmer keys for most brand cars in the market.
In the process of auto technology development, it is not easy to seize the key and truth of automotive. Auto security system is smarter, for increased vehicles are applied with more advanced IMMO system. It is the beginning of computer codes. At the same time, more and more choices on skp 900 key programmer are appear to meet advanced IMMO system’s demands.

Wifi MB SD Connect C5 Mux is the latest mercedes benz sd connect compact 5 diagnostic tool. Mercedes Star diagnosis C5 multiplexer support K-line, can bus and usd protocols. Wireless benz sd connect c5 support Mercedes Benz Cars After Year 2000. OBD2TOOL Wifi MB SD Connect C5 Mux Mercedes Star diagnosis C5 multiplexer Benz Star C5 Xentry connect  for Benz Cars and Trucks.

New C5 Star Star Diagnosis not only support K line diagnose and CAN BUS, but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it; All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products; New MB SD Connect Compact 5 Star Diagnosis support wireless diagnose.