SKP900 Install Driver

For the first time to connect your device with PC via a USB cable, the computer screen will remind you install the SKP-900 USB driver as follow:

14-1

Change selection->

14-2

Next->

14-3

Next->

14-4

Browse the USB driver folder->

14-5

OK->

14-6
14-7

Continue Anyway->

14-8
14-9
Click Finish, wait about 2 seconds->

14-10
Change select->

14-11

Next->

14-12

Next->

14-13

Click Continue Anyway->

14-14

Click Finish.

14-15

Installation finished.

Three steps to add Mitsubishi Pajero new key by SKP900

This blog is going to tell you SKP-900 key programmer can add new key for Mitsubishi Pajero in just one minute! It’s amazing and please read down below steps.

Step1. Start SKP-900 SKP900 then choose “Immobilizer”→ “Mitsubishi”

9-1

9-2

Step2. Choose “System Type” and “Type 1” and “IMMO System”. Next is to turn on the ignition.

9-4

Step3. Choose “Key Adapt” and input the authorize code.

9-5 9-6

It will show “Key Program Success”. Press YES button and insert the new key in 5 seconds then turn ignition on.

9-7 9-1

And Auto Key Programming SuperOBD SKP900 now make new key for Mitsubishi Pajero successfully in 1 minute!

Superobd SKP900 programs smart remote Nissan Sylphy 2013 year

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.

Purpose:

Calculate Pin code and then program smart remote key

Procedure:

1.This is smart remote key …

4-1

2.Turn ignition on

4-2

3.Open OBD2 Programmer Superobd SKP900, come to menu then choose “Nissan” under IMMOBILIZER.

4-3

4.Select “New Structure”.

4-4

5.Select “Smart key”, loding…

4-5

6.Select “KEYLESS SYSTEM”.

4-6

7.Get message “Choose OBDII adapter Yes to continue”, turning on then press YES.

8.Read BCM code

4-8

9.Insert key and turnning on “Yes” to continue

4-9

10.Read out BCM code
4-10

11.Use Nissan Calculator to find Pin code.

4-11

12.Read out PINCODE: 2166 (cause our car after 2009 year) by Nissan Calculator

4-12

13.Use pin code: 2166. Back to “Function Selection” then select “Activate Steeling Lock”, press

“Yes” button.

4-13

14.Get message “If keyless want activate steering wheel, first turn IGN off “Yes” Continue.

4-14
15.All keyless will be deleted.

4-15

16.Enter Pincode 2166

4-16

17.Check INPUT VALUE 2166 “Yes” OK “No” Return.

4-17

18.Activate success wait new keyless.

4-18

19.Key number 1 and number 2

4-19

20.Register KEY Number 1, put key number 1 on Smart button and press 1 time. Security light blink 4 times. Key LED steady. Press smart button to off.

4-20

4-21 4-22 4-23

21.Put key number 2 on Smart button and press 1 time.Security light blink 4 times.Turn IGN off.

22.Use key number 1 turn on again. Turn IGN off. Press brake pedal then press to start.

Engine can start. Turn IGN OFF. Open driver door and close, Key LED blink 5 times.

4-24

23.Test remote, it can work.

4-25