Program Nissan GTR 2010 Remote Key with OBDSTAR X300 DP

How to program smart remote key 3-button to Nissan GTR year 2010 (with card slot) using OBDSTAR X300 DP/ Key Master DP tablet key programmer.

16-2

Main steps:

Step 1: Read BCM code
Step 2: Calculate Pin Code
Step 3: Release steering wheel lock
Step 4: Program smart key
Step 5: Program chip
Step 6: Synchronize to start

Procedure:

16-3

Mark all remotes with number 1, 2,3

16-4

Remote number 1, 2 are programmed and number 3 is a new remote

Take all remotes out of the car

Close all doors and lock the steering lock

Step 1: Read 5-digit BCM Nissan code with  X300 DP
Select Nissan->Nissan/Infitini V31.56->4-digital Pin code->Smart key system->Auto search->Button type->with card slot

16-5

Take all smart key out of the car and press Start button

Select Read BCM Code

16-6

Read 5-digit BCM code success: 8D060

Step 2: Calculate pin code
Select Pincode calculate->4 Digit Pincode->BCM code
Turn ignition off
Confirm BCM code
16-8
OBDSTAR X300DP calculated old pin code and new pin code

*GTR pre-2009 use old pincode
post-2009 use new pincode

Step 3 Release steering wheel lock

16-9
Select BCM (steering wheel lock)
Turn ignition off
X300 DP will ask pin code to access

This car is year 2010, so we enter new pin code

16-10

Steering wheel release success

Step 4: Program smart key with OBDSTAR Tool X300 DP

Put all remotes inside the car

Turn on hazard light
Select With card slot->smart key system

16-11

Insert smart key into the slot (The slot is below the start button or the lower left corner

of the steering wheel) and switch ignition on

Select Program smart key
Press Yes if already releases steering wheel lock
Enter new pin code to access
Program successfully

Insert and turn on 5 seconds every keys

16-12
Insert 1st remote and turn on 5 seconds
Insert 2nd remote and turn on 5 seconds

16-13
Insert 3rd remote and turn on 5 seconds
Turn ignition off and take 3rd remote out

Step 5: Program chip

Insert 1st remote again turn ignition on and take out
Steering wheel lock release
Insert 2nd remote again turn ignition on and take out
Steering wheel lock release

16-14
Insert 3rd remote, turn ignition on and press brake to start car for 10 seconds

Step 6: Synchronize to start

Turn off and take out remote
Open and close driver door
Turn off hazard light
Test all remotes

16-15
All remote worked.

OBDSTAR X300 DP Plus User registration and diagnosis software Download

OBDSTAR X300 DP Plus is a new Android-based vehicle trouble diagnostic device developed for internet applications.  More product details you can refer to 2018 OBDSTAR X300 DP Plus (X300 PAD2) Key Programmer. And this post will guide you how to register and Download diagnostic software.

4-0

Part 1. X300 DP Plus User registration

Click buttonto enter diagnostic software, select “the user information” in “Settings” menu, then enter user registration window as shown below:

4-1
Fill in the information in each field (Items with * must be filled). After inputting, tap “OK”. If you have registered to be a member, click “the user information” to enter user login page.

4-2

Part 2. OBDSTAR X300 DP Plus diagnosis software Download

Enter the diagnosis software main interface, tap the “One Key Upgrade” to enter one key upgrade page, as following picture shown:

4-3
4-4

Tap “One Key Upgrade” to start downloading, enter main interface after finishing downloading. (Notes: Ensure internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently) If need to cancel a software, just tap corresponding Check Box as following picture shown:

4-5

OBDSTAR X300 DP/X300 Pro3 Update Announcement in June 2018

OBDSTAR X300 DP/OBDSTAR X300 PRO3/Key master/key master dp full released new software upgrade in June 2018.

Remote Control Key Programming

X100 PRO/Key Master/Key Master DP

1. Increased Buick Excelle GX 2017-smart key system

2. Increased free pincode key programming in some Renault 2009- vehicles

3. Increased Changcheng H6 2017-PEPS system

Cluster Calibrate

VOLVO (X100 PRO/X300M/Key Master/Key Master DP)

1. Increased Volvo 0L85D dashboard cluster calibrate, read and write EEPROM, read FLASH

2. Increased Volvo 1H56A dashboard cluster calibrate, read and write EEPROM, read FLASH

3. Increased Volvo 1K78X dashboard cluster calibrate, read and write EEPROM, read FLASH

4. Increased Volvo 1M80F dashboard cluster calibrate, read and write EEPROM, read FLASH

5. Increased Volvo 3K91D dashboard cluster calibrate, read and write EEPROM, read FLASH

6. Increased Volvo 3L16Y dashboard cluster calibrate, read and write EEPROM, read FLASH

7. Increased Volvo 4F73K dashboard cluster calibrate, read and write EEPROM, read FLASH

FORD (F100/H100/X100 PRO/X300M/Key Master/Key Master DP)

8. Increased FORD Edge(2015-) SPC5645S+93C86 dashboard cluster calibrate

9. Increased FORD Explorer (2015-) SPC5645S+93C86 dashboard cluster calibrate

10. Increased FORD Fusion (2015-) SPC5645S+93C86 dashboard cluster calibrate

11. Increased FORD New Mondeo (2015-) SPC5645S+93C86 dashboard cluster calibrate Oil/Service Reset

X200 PRO/VAG PRO/Key Master(full configuration)/Key Master DP(full configuration)

1. Increased Volvo V40Cross Country auto reset

2. Increased Dongfeng Fengshen A60 auto reset

3. Increased Dongfeng Fengshen AX5 auto reset

4. Increased Chery Tiggo 3X auto reset

5. Increased Chery Tiggo 7 auto reset

6. Increased Faw Pentium B90 auto reset

7. Increased Faw Pentium X80 auto reset

8. Increased Faw Pentium X40 auto reset

9. Increased Proton Suprima S auto reset

10. Increased Mustang T80 auto reset

11. Increased Opel/Vauxhall vxr8 auto reset

12. Increased Opel/Vauxhall Mokka auto reset

13. Increased Opel/Vauxhall Zafira-C auto reset

14. Increased Opel/Vauxhall Monaro auto reset

15. Increased Opel/Vauxhall ADAM auto reset

16. Increased Opel/Vauxhall AMPERA auto reset

17. Increased Opel/Vauxhall SIGNUM auto reset

18. Increased ASSB 9-5 generation 2 auto reset

19. Increased BYD Qin auto reset

20. Increased Zotye Damy X5 auto reset

21. Increased Changcheng C30EV auto reset

22. Increased Changcheng CH041E auto reset

23. Increased Hover H4 auto reset

24. Increased Hover M6 auto reset

25. Increased Changcheng VV5 auto reset

26. Increased Changcheng VV7 auto reset

27. Increased Changcheng P8 auto reset

28. Increased Mercedes-Benz C chassis 204 new maintenance mode(type A and B) auto reset

Optimization

1. Optimize MG/KIA/Hyundai/Nissan/FORD/Baojun/Suzuki/Changcheng/Geely/Luxge key programming software

2. Optimize Porsche/FORD/BMW dashboard cluster calibrate software

3. Optimize Volvo/ Zotye oil/service reset software

OBDSTAR X300 DP-2

OBDSTAR X300 DP renew key PCF79XX adapter unlock Audi 5 Generation key

Host on how to use Car Scanner OBDSTAR renew key PCF79XX adapter to unlock Audi 5 Generation key by working together with OBDSTAR X300 DP(Orange)/ OBDSTAR  key master DP(Green). Besides, OBDSTAR renew key PCF79XX adapter is designed for BMW, VW, Volvo, Chrysler, Renault, GM, Kia, Hyundai etc.

To unlock Audi 5 Generation key, please prepare the two tools:

OBDSTAR renew key PCF79XX adapter

OBDSTAR X300 DP or OBDSTAR key master DP

Guide:

Plug OBDSTAR X300 DP with VCI box, renew key PCF79XX adapter etc shown as below picture, make sure the indicator lights flash.

OBDSTAR X300 DP-0

FYI, OBDSTAR X300 DP (Orange)VS OBDSTAR key master DP(Green):

They are the same tool, they have same function, save vehicle coverage. They differ from each other in color, the orange one OBDSTAR Scanner X300 DP is supplied on Eshop, so it does not need to waste money to order both two.

OBDSTAR X300 DP-1
Tap X300 DP option “DP” then “Diag Program”.
OBDSTAR X300 DP-2

Tap “Other Function” then “Unlock Key”.
OBDSTAR X300 DP-3

Have option “Renew key V30.01”, click “OK”.

OBDSTAR X300 DP-4

Tap “Audi”, then “5 Generation”

OBDSTAR X300 DP-5 OBDSTAR X300 DP-6

Have 3 options shown as below, go to check the chip board number and tap “Board 233.453.111-05/06

OBDSTAR X300 DP-7 OBDSTAR X300 DP-8

Tap “315MHZ 8T0959754C”

OBDSTAR X300 DP--09 OBDSTAR X300 DP--10

Please refer to the following figure for the correct connecting line.
OBDSTAR X300 DP--11

Pop up “Connect the host to the PCF79XX adapter and supply the 12V power to the adapter.” Tap “OK” and writing data, please wait……

OBDSTAR X300 DP--12

Data Brushing successful, click “OK”
OBDSTAR X300 DP--13

Done.