New Updated Generation of CK-100 Online V38.03 CK-200 CK200 Auto Key Programmer

New Updated Generation of CK-100 Online V38.03 CK-200 CK200 Auto Key Programmer

4 Highlights to get the CK200 Auto Key Programmer:

1. Updated version of CK-100 Key programmer
2. Latest software version: V38.03
3. New generation Car Locksmith Tools
4. Add more car models in CK-200 Auto key programmer.

CK200 Key Programmer VS CK100 Key Programmer:




More added car model of the CK-200 Key Programmer to check:

GM Tech2 GM Scanner -CANdi & TIS

Latest version GM Tech2 GM Scanner- Candi interface&TIS working for GM/SAAB/OPEL/ISUZU/HOLDEN or SUZUKI.

The GM Tech2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 to 2013 year! An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

GM tech2

When you order GM Tech2 in cnauotool website, we can provide you a card (tech2 32 MB PCMCIA memory Card) with any one of these following softwares:

  1. GM-2013 V32.007 software

2.OPEL-(english) 2013 V151.001software

  1. SAAB-2013 software
  2. SUZUKI -2013software
  3. ISUZU-2009 software
  4. Holden export software
  5. Australia Holden software

Notice: TIS together with this unit is Offline TIS,offline TIS is free,it including GM TIS and OPEL TIS can program GM and Opel cars only till 2008. we will offer clear instructions and the cracked file.

Differences between X431 5c and X431 V Pro

 Product  X431 5c  X431 V  Pro 
 CPU:  Dual core 1GHz  Dual core 1GHz
 Battery:  3000mA  3000mA
 Extended memory card:   32G Micro SD (TF) card   32G Micro SD (TF) card
 Storage capacity  2GB  2GB
 Internal Memory  512MB  512MB
 Screen Size  7.0 inch  7.0 inch
 Communication  WIFI, Bluetooth  WIFI, Bluetooth
 Package Weight  1.3 KG  6.5 KG
Package List:           √
OBD II extension cable

Cigarette lighter cable
OBD II extension cable

Cigarette lighter cable
 Price:  $699.00  $829.00

*OBD II extension cable including: 

1pc x DBScar, BENZ-38 diagnostic connector
1pc x DBScar, DAEWOO-12 diagnostic connector integrated
1pc x DBScar,AUDI-4 diagnostic connector linear
1pc x DBScar,BENZ-14 diagnostic connector linear
1pc x DBScar,BMW-20 diagnostic connector integrated
1pc x DBScar,CHRYSLER-6 diagnostic connector integrated
1pc x DBScar,DAIHATSU-4 diagnostic connector linear
1pc x DBScar,FIAT-3 diagnostic connector linear
1pc x DBScar,FORD-6+1 diagnostic connector integrated
1pc x DBScar,GAZ diagnostic connector linear
1pc x DBScar,GEELY-22 diagnostic connector integrated
1pc x DBScar,GM/VAZ-12 diagnostic connector integrated
1pc x DBScar,HONDA-3 diagnostic connector integrated
1pc x DBScar,KIA-20 diagnostic connector integrated
1pc x DBScar,MAZDA-17 diagnostic connector integrated
1pc x DBScar,MITSUBISHI/HYUNDAI-12+16 diagnostic connector
1pc x DBScar,NISSAN-14+16 diagnostic connector
1pc x DBScar,SSANGYONG-14 diagnostic connector linear
1pc x DBScar,SSANGYONG-20 diagnostic connector integrated
1pc x DBScar,SUBARU-9 diagnostic connector integrated
1pc x DBScar,SUZUKI-3 diagnostic connector linear
1pc x DBScar,TOYOTA-17 diagnostic connector integrated
1pc x DBScar,TOYOTA-22 diagnostic connector integrated
1pc x DBScar,UNIVERSAL-3 diagnostic connector linear

BMW EWS and CAS Key programming from EEPROM Dump

Before programming a BMW Key, you need to have a basic understanding of your BMW immobilizer system. BMW immo system can be generally divided into two categories: EWS and CAS.




How to tell your BMW is EWS or CAS immo?

1. Year

1) 2000-2003/04 BMW 3-series, 5-series, 7-series with straight shank remote control key belongs to EWS system, like picture below.


Here is the EWS immobilizer ECU


2) 2004-2006 BMW 3-series, 5-series, Z4, X5, X3 belongs to CAS2 system. CAS2 and CAS3 immo ECU picture display as below. Another Straight shank remote control key (similar to Land rover key) with BMW logo, but in black color, belongs to CAS2 immo system as well.



CAS1: old BMW 7-series

CAS2: 2004-2006 BMW 3-series, 5-series, Z4, X5, X3

CAS3: BMW 3-series, 5-series before year 2010

CAS3+ BMW 3-series after year 2010

CAS4: BMW 5-series after 2010, BMW 1-series after 2011


2. Car key type

CAS1 BMW 7-series should insert the smart card into the slot and press start key.

CAS2 is the straight shank remote control key

If BMW key needs insert smart card into the slot and press one key to start vehicle, all these keys are easier before CAS+., almost of them are CAS3.

CAS4 key no need to insert the smart card to slot, directly press Start button

For example, if your car id BMW X5 2009, it should be CAS3 system.

After confirm your immo type, the next is to pick up a proper key programmer. AK90 key programmer (for all EWS), AK300 key programmer, Car key master, BMW Multi Tool are all good options for BMW key programming. BMW Multi Tool is the most stable and recommended.

BMW Multi Tool key programmer is mainly designed to work on CA1, CAS2, CAS3, CAS+ CAS4. But it newly added EWS key programming if provided with EWS adapter.


CAS1 write key

CAS2: requires demolition, write key after read data

CAS3 and CAS3+: no need demolition

BMW Multi Tool has two key programming options: File Make Key and Make Key online via OBD2.

1) File Make Key:

Select “File Make Key” tab,

Insert new CAS2 key into the CAS Adapter

Do not need to connect BMW Multi Tool with vehicle, only connects it with computer,

Select CAS2

Click Key learning

CAS2 key has been programmed


2) Make Key online via OBD2

Connect BMW Multi Tool with vehicle, then connect with computer,

Select Auto Detect, the system will automatically detect the protocol and type

Click Write EEPROM, then click Save to File…

Click Key Learning.

Then the system will display following message:

Make dealer key- using CAS Adapter (make key using CAS adapter)

Make dealer key-using ignition switch (Turn ignition ON/OFF)

The first way is frequently used.

Click Get Key Info, then the system will display key information. Select any key position number (KeyID3, 4,5)

Insert the new smart card into the CAS Adapter, click “Make Dealer Key-using CAS Adapter”

After that the system will display, select Add key, press Next

Make dealer key successfully.

Plug the original key form key slot, insert the new key into the key slot, the new key is ready to use, the remote can be activated as well.

Click “Synch DME-CAS”


How to renew Autoboss V30/E30 Elite software subscription

Original AUTOBOSS V30 Elite with built-in mini printer supports one year free update online. But you need to renew the software subscription via security card after one year (12 month). The AUTOBOSS V30 Security Card keeps your Autoboss OBD2 diagnostic tool up-to-date and instant extension of access to latest update downloads.

Autoboss V30 Elite scan tool software renewal instruction:

1)      Log in Autoboss official website

2)      Open update client from desktop shortcut and enter your S/N (Serial Number) and Password.


3)      After clicking [Ok], the Update Client V2.**** program will appear.


If your account is valid, you will be taken to the download screen.

If your account is about to expire within the next 30 days, Autoboss V30 Update Cline program will display “Your account will expire on 20******, please contact local distributor to renew” message shown below:


If your account has expired, the Update Client program will display the expiry information “You account is expired on 20******, please contact local distributor to renew”. Click [OK] to proceed to the download page.


4)      If your account is expired, you will not be able to download Diagnostic software versions released after the expiry date.

Select software exceeded download time limit


5) Press “Renewal Settings” button on the right. Enter the Card Number and Security code from the Autoboss Elite V30 scanner’s Security Card to renew your software subscription. Click [OK] to proceed.


6) Follow the system prompt until the renewal procedure is done.

Autoboss V30 Elite Super Scanner is a new scanner made by Autoboss(SPX),get the detaeled and servise on

LAUNCH Creader VIII(CRP129)–LAUNCH Original Package

These days, Launch CRP 129 are well sold in this code reader are so well known,it is necessary that I tell more about it.


I will not make a specified description of CRP129 here. Just make a short introduction.                                                      1.LAUNCH Creader crp129 supports OBDII standard after 1996,OBD 2 test models are up to 10 kinds;but JOBD2 is unavailable.

2.Language of LAUNCH Creader crp129 :English, Spanish, French, Chinese                                                                          3.LAUNCH Creader crp129 can read and clear data.

4.LAUNCH Creader crp129 can eset service light for multiple car models,reset Engine oil light and  brake block(this function is only for BMW now), Correct steering angle sensor(this function is only for Landrover now) and so on.           5.LAUNCH Creader VIII supports 40 car models( from USA,European and Asian) 4 systems(ABS, ECU, Airbag and Transmission)

6.Car list of LAUNCH Creader crp129:

Asian car models: Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Daweoo, Hyundai, Kia, Subaru, Infiniti, Lexus, Accura, Isuzu.
American car models: Ford, EU-Ford, GM, Chrysler
EUROPEAN car models: Mini, Vauxhall, Dacia, Alfa-Romeo, Lancia, Peugeot, Renault, Citroen, Benz, BMW, VW, Opel, Volvo, Fiat, Landrover, Porsche, Seat, Skoda, Audi, Saab, Sprinter, Jaguar.

7.Software of LAUNCH Creader crp129 is updated online one year for free.

GM Tech2 clone from China details

I bought a GM Tech2 scan tool clone from China, arrived the other day, installed the TIS2000 software on an old Dell D610 laptop with Windows XP (as the seller said it would only work on XP system), and am now successfully using it on my 1999 9-3 Vert, sierra and g8. No issues at all getting security access or anything.
Tech2 Diagnostic Scanner for GM
So far I have run through the self tests, and connected to my Vert (which does not require Candi module although the tool does support Candi module) and all went well as expected. Was able to connect to laptop and TIS2000 via the serial connection and control the Tech2 scanner via the laptop. Also was able to marry all 4 door modules with my tech 2. FYI, Tech2 does not need software installation but need you install TIS2000 and the TIS2000 should be plugged to the laptop and should communicate with the Tech2.

Mine is from a Chinese shop named OBD2TOOL: The seller Daisy He is good at questions and would email me back in minutes. I have been playing the scanner in the past few days, and it has been flawless and other friends, except one, have no issues with theirs either. That friend got the unit from Ebay and cannot connect to a laptop. I think it all depends on the seller. I saw some Ebay units work too. It is luck of the draw really. Maybe I was lucky and got a good clone.

How to install MB Star C3, C4 software?

Here take 2014.1 software for example:

1. Install Windows XP SP3 preferably OEM disc since MB Star C4 and C3 software  are better installed on Windows XP system. For newer PCs you will need one with SATA drivers integrated.

2. During Windows XP install, partition your HDD as follows:

C: STAR approx. 25GB

D: RECOVER approx. 20GB

E: WIS approx. 35GB

F: DAS approx. 30GB

3. Create two user accounts Star and Owner and log in into both.

4. Install all the necessary drivers based on your computer model.

5. Disable the internal DVD-ROM from device manager.

6. Install basic apps such as Daemon Tools to create virtual drive G and WinRAR.

7. Disable screen saver and change power options to Never from the control panel.

8. Copy “Newguide2i” to desktop and run “WFPSwitch” and restart PC, this will remove “keep unwanted files” error during install.

9. Copy VBoxService to Startup folder to enable AppID 253.

10. Run “prepare.bat” from “Newguide2i” and follow the simple onscreen instructions.

11. Set system date approx. to one month after Star DVD release.

12. After restart, open “StarUtilities” and enter DAS and Xentry key, with AppID 252.

13. Mount SD_DVD_01_2014_1 to drive G: and run setup from “SDSwitch”.

14. To bypass hardware check for non ADSTEC C4TT13 systems, as soon as the install begins, quickly navigate to “E:ServiceSKCstandaloneSDStartKeyCenter” and DELETE “DeviceDetect.dll” to avoid the infamous “non-Star Diagnosis system” error.

15. Setup continues and you get an error prompting you to enter Xentry key as no valid key was found. Click OK and “StartKey Centre” opens, apply keys and move on.

16. System will restart and if setup doesn’t, re-run again from drive G: by clicking “SDSwitch”.

17. Patiently wait as it installs SD_DVD_01_2014_1.

18. System restart and gives you an error, “No valid CD found! Errorcode=102” ignore by clicking OK.

19. Navigate to “C:ProgrammeTemp” and DELETE “ComputerModel.vbs” script, this will allow you to install SD_DVD_01_2014_2 without the “non-Star Diagnosis system” error.

20. Mount SD_DVD_01_2014_2 to drive G: and run setup from “SDSwitch”.

21. Patience is key as the very lengthy procedure begins.

22. You get the message “Setup Complete” Click to restart your system, but hold up do not restart, run “after installation.bat” and click on to restart system.

23. Systems come on and hotfix install begins, approx. 91 of them so wait as they finish.

24. Hotfix install completes and system is ready to start and viola you’ve got a full SD 01.2014 on a machine of your choice!

25. Install ADD ONS manually. Then your MB Star C3/C4 software installation will be finished.

products follow here:

Piwis tester 2 VCI selfcheck not work, hard disk data lost?

Piwis tester 2 (power-on password is porsche2018) including ALLSCANNER VCX-PLUG users, attention please: If you got VCI selfcheck error or hard disk data lost? Please do take my tips as follows:

Tip 1, actually Piwis tester 2 selfcheck function is not working, do not click [Settings] – [VCI Configuration], otherwise you will get error.

Tip 2, Piwis hard disk is not compatible with other computer, but only CF30 packed with Piwis tester 2.Do not take outthe hard disk from the CF30 laptop and install it on other computers, otherwise the data maybe get lost and hard to recover.


obd2tool engineer advises piwis users follow his instructions step by step as shown below, improper operation will cause error:

Step 1.Start the car or turn on ignition.

Step 2.Connect PIWIS ii to the car, wait until the indicator light flashes then connect USB cable to the computer.

Step 3.Choose car model you want to test.


Step 4.Enter PIWIS TESTER 2 diagnostics.



Step 5.When the system appears “Control unit selection: Loading control unit selection”, it means PIWIS TESTER 2 is working. NOTE: you won’t see control unit list if piwis not connect properly or piwis has something wrong.


vag com 12.12

VAGCOM 12.12 for my Audi Q5

I just got my VAGCOM 12.12 on this site and installed it on my computer that has a Win 7 system. I have tested it on my Q3 to reset airbag. The cable works perfectly and no worries. No driver problem or software problem.

vcds 12.12
VAGCOM 12.12 Functions and Features:
1. Support audi, covers the year until October 2013
2. Change the system time automatically; the software is permanently valid
3. Automatically cut off the network in case of update flash
4. Password protection
5. Support Windows XP, Windows 7 32 and 64 bit
6. New USB Drivers. Now it is compatible with the latest PCs which use Fresco Logic USB3 chipsets.
7. New more universal Airbag Coding Assistant.
8. New “Upload Debug/Log File” functions in Applications Dialog