choose Newest highest Quality GM MDI

Yesterday, one of my friend ask me :”Why i should choose newest highest quality GM MDI but not?GM MDI Diagnostic tool?” I believe you will also have this question.

Yes, why? why we choose it? Only because it is the newest?Let’s see together

Firstly, the?GM MDI Scan Tool

gm-mdi-diagnostic-tool-1

we can see it’s function and feature:

GM MDI is a new GM Diagnostic tool.it is not only work for the new gm car,but also for the old kind of car.it can test GM car from 1990—2012 year gm car. We can supply tech win and gds2 software for you.

really, it’s a good item , doesn’t it?

 

 

Let’s see the Newest highest Quality GM MDI??:highest-quality-gm-mdi-multiple-diagnostic-interface-01

It Made by Original Chip, it has all the funcion of GM MDI,?additional?it add 11 new more?functions:

1. With opel Global tis global diagnostic system
2. Support offline lease function
3. Support Opel offline programming function
4. With GDS2 diagnostic system
5. Tech2win diagnostic software support adding latest software

6. support programming online
7. support cable communication
8. support wireless communication
9. support original factory latest software
10. With European Chevetl Global tis, Supports European Chevetl offline programming
11. All Chip are new and original

Maybe you will ask: “May i use the original software on this gm mdi hardware?”

The answer off course is Yes ! You can use it. This GM MDI interface is made by original chip. Almost has the same function as the original one. You can use the original software with this hardware.

Someone will ask:”GM MDI supports online programming?”

Pls do not worry about it.?It has online programming. But for this function, you need to open and buy the online programming software from the original factory. Here is the software link: http://www.gmtechinfo.com/. You can directly buy the software and use it.

In a word, we can see the newest highest GM MDI contain more functions and made by original chip. ?With best quality and good price. Choose this, a right decision!

How you can fix Digimaster3 Black/White Screen ?

When your digimaster 3 have Black/White Screen problem , how to fix it ?

digimaster-3-digimaster-iii-odometer-correction-master-1[1]

Update kernel of digimaster 3 was newly added(one key through updating kernel by SD card),we made some modification on EBBOOT program.

Update EBOOT

Press button number 8 and click button OK at the same time, then “Press OK to confirm, and if the button “continue update Firmware” appears, it means your device EBOOT program is old version, you need to firstly update EBOOT program and choose a convenient way to update Digimaster 3 kernel.

Digimaster 3update kernel

After update EBOOT, it is necessary to update kernel.

Tips: Before update EBOOT, please instal D3 TOOL first.

Step 1: Press button number 8 and button OK at the same time, and turn the power on. When you see “Press OK to confirm and continue update Firmware” press OK, then it enter the procedure of updating.
Step 2: Connect D3 with a computer through Mini USB (purple color), you can see a tip “Found New Hardware wizard”. As the image shown below.

digimaster3-solve-black-white-screen

Step 3: choose “install the software automatically”, click “click”
Step 4: If DIGIMASTER iii have been installed already, choose the second “SEC SOC SMDK Board” in dialog box as shown below, and click “Next” to complete driver installation.

digimaster3-solve-black-white-screen-2

Step 5:Double-click Digimaster 3 PC Tools and choose “Kernel Update”.

digimaster3-solve-black-white-screen-3

digimaster3-solve-black-white-screen-4

Step 6: Make sure the purple Mini USB is connected, then you can see ”
USB connect succeed”

digimaster3-solve-black-white-screen-5

Step 7: click “Kernel Update” and choose “EBOOT_20110427.bin” then click “OK” to start EBOOT program update.
Step 8: After 10sec. the DIGIMASTER 3 screen appears a twinkling red ‘YH’ logo which means EBOOT update is complete.
After update EBOOT successfully, please turn the power off and choose an appropriate way to update the kernel.
Kindly Notice: Please unload the anti-virus software and firewall temporarily in order to run the software normally.

Any questions, feel free contact us at: sales@obd2tool.com

Comparison Table of VAS 5054A

vas-5054a-vw-audi-diagnostic-new-9

The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.

Comparison Table of VAS 5054A:

Item Number SP33 SP33-B SP33-BO SP33-C SP33-D
Software Version ODIS V2.0/V2.02 ODIS V2.0/V2.02 ODIS V2.0/V2.02 V2.0/V2.02 V19
Language English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English Only
Support Vehicles VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
Bluetooth
Connection
Password
082145725 082145725 082145725 082145725 084301625
Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol
Function Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
OKI Chip No OKI Chip No OKI Chip With OKI Chip With OKI Chip With OKI Chip
Connect Car By Cable & By Bluetooth By Cable & By Bluetooth By Cable & By Bluetooth By Cable & By Bluetooth By Cable & By Bluetooth
Update CD CD CD CD CD
Computer
Windows
System
Requirements
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS 5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Difference They have almost same function, SP33-D only has one language; while the SP33,SP33-B,SP33-BO,
SP33-C are multi-language, customer can swith language by themselves. SP33-C is the best quality one.

How to use WIFI BMW ICOM A2+B+C Software

Best ICOM A2+B+C for BMW with latest 2015.3 software,New adds WIFI function. With second generation diagnose and programming system,More convenient to use,But in the course you maybe still encounter some problems.

What should you pay attention when use USB WIFI for WIFI BMW ICOM:
1) Insert USB WIFI to your PC USB port first

2) Turn off the computer WIFI and other added WIFI. Your PC only can use our USB WIFI. Wired Ethernet port of your PC cannot connect internet and LAN cable for ICOM.
3) Make sure all above you have done, then start your PC.
4) After your PC is started. then make sure internet are all turned off or do not connect any LAN cable
2
Attention: this DWA-131 is our USB WIFI. You CANNOT turn off it. It is normal to show X.

5) Start the ICOM software, tick “wifi for ICOM”
3
6) After done. Now connect your ICOM firmware with your car. Wait for 20-60 second, then you will see the light on the ICOM main unit will flash slowly or do not flash. Then it means USB WIFI and BMW ICOM A2 WIFI are matched ok and have communication.
4
7) Now you can use diagnose and programming software. Click OK if you meet the following prompt.
5
8) This interface cannot be closed. Only can be minimized.
5
9) Software can recognize firmware normally.
6

http://www.obd2tool.com

NEXIQ 125032 USB Link + Software Diesel Truck Diagnose Interface FAQ Summary

Q1: Can I update your NEXIQ 125032 USB Link?
A1: No, do not update NEXIQ 125032 USB Link, otherwise it will not work.

Q2: NEXIQ 125032 USB Link + Software need password?
A2: No, it does need, for more details, please check the user manual in the column “technical support” or under “Related Download Files”.

Q3: I followed the instructions step by step to install the drivers. I didn’t have internet connection and I never tried to update the USB-Link. The “POWER” light” got on and the “DATA” & “FAULT” lights go on and off, on and off. And the device manager show and hide the USB-link drive.
A3:  This is because you install the original new driver and the Nexiq is broken, you need to return back to us for repair. (Note: please do not install the original software with our hardware.)

Q4: Does NEXIQ work with Volvo Bus and Isuzu truck? NEXIQ has no communication with these two vehicles.
A4: Nexiq hardware is not compatible with Volvo Bus. And our Nexiq only work with North American Isuzu. Nexiq cannot work well with CAT either, especially the Asian Cat, Nexiq only support CAT with J1939 and J1708 protocol, but so far most CAT engine is CAT special protocol CDL and J1939 Protocol has not yet come into use.

Q5: I bought one NEXIQ 125032 USB-link, after the driver setup finish; I plug Nexiq into the computer and all the indicator lights flash, this is not should be like this, what it means? What should I do? Does Nexiq have any problem? (By the way, I followed the setup instruction in the video)
A5: Try to install successfully the software driver and thenconnect with the car to test the vehicles. Any more questions, please keep contact.

Q6: When the ECU starts, it shows an error message “Received Error Code: 275”
A6: The driver isn’t installed successfully, and the software can’t recognize the hardware.

Q7: When connect the Nexiq, The power light, data light and Fault light keep flash fast, what’s the matter?
A7: You try to update NEXIQ, right? You have to return back us for repair.

Q8:  Does Nexiq contain ISUZU IDSS software? IDSS software fail to loading and display CRC error: “the file C:\Program Files\IDSS\ images\2007icvch \processed\fullsize\fullb606.rra doesnt match the file in the setup’s.cab file.”
A8: Please check the setup instruction and step-by-step install the software, and at the same time make sure your computer system support Isuzu IDSS software

Q9: I am your old customer; I buy from you several NEXIQ. But this time, when I open this software: V-MAC III Service diagnostics V2.6.12, it display an error message “Unable to read value software\Mack Trucks, Inc\Common\Device ID”, then I choose “Preferences “and then “RP123A Device name”, but there is nothing in the drop-down box for me to choose Nexiq USB.
A9: Make sure the driver installs successfully and the Patch is installed. Please install the software on another computer, do not install on the computer that you previously used.

Q10: WAS Multi-Diag Truck Diagnostic Tool(item NO.SH49), Nexiq(item NO.SH27), DPA5 (item NO.SH47 and SH47-B)? What is their difference?
A10: both of the three truck scanners are powerful, good quality, best-selling,but there are some differences among them: 1) supported truck models: Nexiq(item NO.SH27)and DPA5 (item NO.SH47 ,SH47-B) mainly work with American trucks, WAS Multi-Diag Truck(item NO.SH49) mainly work with European trucks. 2) Function: their function is almost the same, mainly support diagnosis and basic programming for a part of trucks, for example: Nexiq support program for Cummins.

Learn more detailed information pls click

 

Key Pro M8 Programmer FAQ

Q.How to unlock SK142 the key pro M8 
A:The detailed steps are as follows:
1. Give serial number and password to our sales@obd2tool.com
2. Send us unlock ID and we will give you the right unlock code;
3. Input the code, and the device will be unlocked;
4. The PIN code remains the original one;
5. Copy the documents in the CD to a computer;
6. Power up the device, start it up, connect it to the computer via USB cable and install the device driver;
7. Run M8 Tool.ex;
8. Upgrade the unlock files into the device, for the programs will be cleared after locking.Q:  I want to use the MVP key pro m8 programmer for 2012 maxima and altima? Is it ok?
A: Yes. Their IMMO system are the same. They are in the supported list of the key pro m8.

Q: How to use the key pro m8 to read the security code?
A: Here we put Audi A6 as example:

the-key-pro-m8-read-security-code-1 the-key-pro-m8-read-security-code-2 the-key-pro-m8-read-security-code-3 the-key-pro-m8-read-security-code-4 the-key-pro-m8-read-security-code-5 the-key-pro-m8-read-security-code-6 the-key-pro-m8-read-security-code-7
Then 3206 is the pin code for this car.Q: How to use the key pro m8 to read the pin code for 2011 Nissan Cube Proximity – MVP & TCODE – PRO?
A: Here is the detailed instruction:
1) Use BCM (CAN) to read the code. Such as 123AC

the-key-pro-m8-technical-support-1
2) Then enter the code to the textbox.

How to reset SBC with Mercedes Benz MB SD Connect C4 Star diagnostic tool

Today we’d like to share with you , How to reset SBC with Mercedes Benz MB SD Connect C4 Star diagnostic tool

We need device:

MB SD Connect C4 with DELL D630 HDD

DELL D630 PC

sd-c4-for-m6-plus-dell-d630-laptop-1

 

Here displays the SBC unit extend service live instruction:

In Developer Mode:

1. Make sure engine is running

2. Run DAS, find out and locate following:

Select Entwickelingsdaten – >hit F3

Select ansteueringen -> hit F3

Select Gesamstliste aller Ansteuerungen-> hit F3
to see how many times brake has been pressed. There is a option that says: Bremsenzahler (DJ_GetBrLive)

3. Then 1 line down there you see Bremsenzahler aktualisieren und Lebensdauerzahler F neu berechenen -> click the icon

Parameter uINBR = 0, hit F3

4. Scroll 1 line down Bremsenzahler auf beliebigen Wert setzen (DJ_SetNBr) -> click it
Parameter uINBR = 0, hit F3

5. Then scroll down until you see the option:

Lebensdauerzahler F neu berechenen (DJ_CalcLiveTime)
Parameter uINBR = 0, hit F3

Lebensdauerzahler F neu berechenen und schreiben (DJ_BuildAndWriteF)
Parameter uINBR = 0, hit F3

6. Log out of SBC
7. Log out of vehicle

Let vehicle engine run at least 10 minutes or drive a 10 minutes at least road test.

If no coils are damaged, SBC fault code is not AKTUEL

Hope it would help you, if any questions, please contact us at : sales@obd2tool.com

Some problem when you operate the MB Star C4

So many customer meet some problem when they operate MB Star C4.If you also have some problem .pls do not worry about that .you could tell us what is happened and send the picture which step could not work .Our engineer will solve that one by one for you .

 

Here Let us to show some problem we often meet then how to solve that as following :

 

Q1: The MB Star C4 could work with the window 7?

A1: Although the moveable hard disk version is compatible with WIN7, better Professional version. But we suggest you not use WIN7, 90% sdc4 software get broken because of the usage of WIN7.

 

Q2: When you operate the mb star c4 but that the Screen become blue after  insert SD C4 Dell D60 hard disk into the computer and open it.

A2: Pls note : you need make sure your Dell D630 computer is integrated video card and with 1GB memory, because the D630 of discrete video card is easy to have blue screen or shutdown and restart, restart and shutdown.

 

Q3:When you operate that .if appear the problem as following picture ?

A3: Pls do not worry about that .you need activate that .and then we will send the the Xentry deverloper file then you will activate that is ok .

Here i wont list more one by one here ,if you meet any problem when you operate the mb star c4 ,pls contact us on our website : www.obd2tool.com

Newest 4.94 Digiprog III Odometer Master Programmer

Digiprog 3 with newest version V4.85, compared with Digiprog 3 V4.94 version, it has added more car models, performance also better.

DIGIPROG III

Highlights:
Brand: YanHua
Newest Version: V4.94
Supported Languages: English, Spanish, French, Portuguese, Italian, Turkish,  Dutch
V4.85 Version Newly Added Vehicles:
BMW:
F20
F30
Citroen: C3/DS3 new versions
Dodge: Charger 24C16
VW: Diag new version
Fiat:
Fiorino 95080/ECU95320
Ducato/Punto 95160
Landrover:
Evoque 93C76
Mazda:
3 C66
Mercedes:
Crafter/Sprinter EZS new versions
Mitsubishi:
Lancer new version
Nissan:
Qashqai 2011 HCS12
370Z C86
Renault:
Scenic 24c16+ABS
Other Features: 
Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication

Newest V1.8.1504.24 Digimaster3 iii Odometer Correction

Digimaster III added models for mileage correction and airbag resetting Version:1.8.1504.24 (2015-04-30)

Updating models for mileage correction:
1 Peugeot 408 2015 BSI 95256 95256
2 Peugeot 408 2015 Instrument 95160 95160
3 Roewe 350 2014 Instrument 95080 95080
4 Roewe 350 2014 Body ECU 24C16 24C16
5 Faw Elysee Instrument 93C86 93C86
6 Faw Elysee BSI 95256 95256
7 JMC Shunda 24C08 24C08
8 Howo 24C04 24C04

Updating models for airbag resetting:
1 Ford Mondeo DS7T-14B321-EB 95640
2 Ford Mondeo BS7T-14B321-AC 95320
3 Mitsubishi Jin Hyun 8635A321-0285011550 95640
4 Cadillac Seville 5WY87270 95160

digimaster-3-digimaster-iii-odometer-correction-master-1[1]