What’s the Difference Involving Digiprog3 and Digimaster3 ?

What’s the Difference Involving Digiprog3 and Digimaster3 ?
Cusotmers wanna do mileage function
may possibly possess a problem : Which 1 to purchase ? Digiprog 3 or Digimaster 3 ? Those two are each the very good device, but which 1 must be the most beneficial decision ?

Please don’t worry, let’s verify the difference among these two divice

Version:
Digiprog3: V4.94

newest-digiprog-iii-entire-kit-1[1]
Digimaster
three: 1.eight.1504.24
digimaster-3-digimaster-iii-odometer-correction-master-1[1]
Screen size:
Digimaster
3 has a great deal larger touch screen than digiprog three

Language:
Digiprog3 supported language: Deutsch, English, Espanol, French,Portuguese,Italiano, Turkish, Nederlands

Digimaster three supported language: English

Strategy to adjust mileage:
Each by OBD2 or dashboard

Update:
Digiprog3:
Customers aren’t allowed to update by themselves.
Our engineer
plan update files based on users’ machine serial quantity, then send to customers to update.
Digimaster
three:
Original and update
on line by users anywhere anytime, and a single year totally free update

Vehicle list:
Digiprog3: Odometer tool for universal
vehicle, but cover significantly less car models than digimaster three, digiprog 3 can not do well For Ford, For Benz, For BMW, For Opel that digimaster three can do.

Digimaster three:
The very best odometer tool for universal car, for instance it may adjust mileage For ford, For BMW, For Toyota, For Benz, For VW,For Audi,For Volvo,For Renault.

Automobile year:
Digiprog3:
Usually speaking, Digiprog3 cover autos from 1996 to 2013(some can do 2014 and 2015 year) the automobile year it covers differs 1 in the other primarily based on specific vehicle.

Digimaster 3: Commonly speaking, digimaster3 cover autos from 1996-2014, some for 2015 year , the automobile year it covers differs one particular from the other based on certain vehicle.

Tokens:
Digiprog3: No tokens
limited
Digimaster
3: Item No.SP78 no token limitation, Item No.SP78-B with 980 Tokens

Function:
Digiprog3 :
Primarily for setting and programming digital speedometer.
Digimaster
iii: odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming important for Benz &BMW etc

Conclusion:
If you want
one mileage correction device to do most normal brand cars, you can choose Digiprog3 is enough.But for the new and high-end cars,
you need to use Digimaster
3.

At the same time, if you want to choose one particular multi-function mileage correction,
the Digimaster
three is the best option. Digimaster three contains the advanced technology
of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting;
35080V6 erasure etc.

Hope it would help you

How to disable TPMS with Porsche Piwis Cable

The following part displays the step-by-step guide of disabling TPMS with a Porsche Piwis cable on a 2008 Porsche Boxster S 987.

Tool needed:

1. Porsche Piwis cable (cheap $30- on aftermarket, like $22.99 in obd2tool)
2. Screw driver
3. 11mm socket
4. A laptop/computer running win xp home

NOTE: This Piwis cable fits most of Porsche Models from year 1990 to 2007. But this cable does not support newer Porsche models.

Step 1: Disconnect the TPMS control unit

1) Disconnect the TPMS control unit locate to the right of the brake booster. Open front trunk and dislodge the weather stripping that seals the front trunk. Remove the entire seal loop from the trunk. (See the picture below)
disable TPMS with Porsche Piwis Cable
2) Remove the plastic cover that protect your DVD/brake booster. Remove following 7 screws circled in red picture below with a screw driver. Then remove the light and plastic carpet hold marked red arrow.
disable TPMS with Porsche Piwis Cable

3) You can see the TPMS control unit white box marked red in picture below which located next to the brake booster. Use the 11mm socket to remove the plastic nut market red arrow.
disable TPMS with Porsche Piwis Cable
4)  The connector has a swing arm connection. You simply need to first press down on the small catch tab (red circle), then lift the pink swing arm (see insert).
Piwis cable4

Step 2: Recoding with Porsche Piwis cable

1) Turn the vehicle ignition switch to ON position
2) Turn on hazard signal
3) Plug the Porsche Piwis cable into the OBD port
4) Connect the cable with computer/laptop via USB port
5) Install and run software
6) Select “Instrument cluster”>> “Coding”>> “Tire Pressure Monitoring System (TPMS) Not Installed” and “Normal pressure display (TPM) Not Active” in the software Function list.
Don’t forget to back up files when you do some changes.
disable TPMS with Porsche Piwis Cable
7) Select “Commands”>> “Reset”>> “Send” to reset the instrument cluster node
disable TPMS with Porsche Piwis Cable
8) Select “Gateway”>> “Coding”>> “Tire pressure monitor Not installed”
disable TPMS with Porsche Piwis Cable
Exit the software program is the process is complete. Otherwise, continue to realize other functions.

Porsche Piwis Tester II with CF30 Laptop

MS908 Autel MaxiSYS PRO –THE NEWNEST TOOL

For my perspective , MS908 Autel MaxiSYS PRO Diagnostic System is the newest tool , which have the advanced configuration and the newest technology. Many friends prefect like this tool , because its have more programmer and more amazing functions.

On the one hand , the MS908Autel MaxiSYS PRO Diagnostic System support with WIFI that it can do online programming , at the same time its compatible for diagnosis and online programming for part of the original software. Beside , theMS908Autel MaxiSYS PRO Diagnostic System is involving a variety of language , such as English , French , Chinese , Spanish , German , Japanese , Portuguese and so on . And the MS908Autel MaxiSYS PRO Diagnostic System is operating system of Android TM 4.0 , supporting ICE Cream Sandwich , as well as supporting free WIFI . The type of the MS908Autel MaxiSYS PRO Diagnostic System battery is 11000m Ah 3.7v lithium- polymer and charging via 12v vehicle power .

On the other hand , the MS908 Autel MaxiSYS PRO Diagnostic System has more powerful and functions .The MS908Autel MaxiSYS PRO Diagnostic System has extensive vehicle coverage for more than 80 US, Asian and European vehicle makes , easy and intuitive navigation makes finding what you need simple and fast and configures display options, sets triggers, records and playbacks results with one touch
, as well as open source Android Operating System for fast boot-up.

This tool has been committed to providing the best and easiest-to-use diagnostic solution with the most extensive coverage of all system for all the major vehicle manufacturers without relying on dealer availability. And the the MS908Autel MaxiSYS PRO Diagnostic System is also supporting remote technology so that you could used it all the time if you have wireless . Of course , this tool can

displays live data n text , graph, analog and digital gauge for easy data review and analysis.

All in all , the MS908Autel MaxiSYS PRO Diagnostic System has more powerful and functions than other tools . Its very popular that this tool have the newest technology and the highest configuration . I consider that it is deserved to purchase .

MS908

How to Use best car diagnostic tools Launch X431 Diagun III?

Most users must agree original launch X431 diagun III is a very best universal car diagnostic tools for technicians. Since it is designed and developed by LAUNCH, that means it is high quality and work very well; and launch diagun iii has official website, the users are available to update diagun iii via Internet; the best cool thing for auto technicians is that launch x431 diagun 3 work with over 70 Car Models.

Launch X431 Diagun III is a new professional vehicle diagnostic tool designed and developed by LAUNCH for repair technicians.X-431 diagun smart, easy to carry, fully functional and convenient to use, and it’s the standard equipment for garage technicians.Original Launch X431 Diagun III  Bluetooth Update Online Free 1 year.

Let us have an overview on how to use original launch x431 diagun 3?

X431 Diagun III

Step one: plug the X431 Diagun scan tool OBD-ii adapter plug into the car computer system OBD2 socket, and turn to the car ignition but never get started it. pls make the 12V electric power.

Step two: start up Launch X431 Diagun III scan tool. The screen display, please wait some seconds until Diagun III communicates with the car ECU.

Step three: Plug an X431 Diagun OBD2 reader right into a connection port on the car. X431 Diagun code reader is able to read out the trouble code and erase the trouble code.

Step four: navigate the menu to find the stored codes, the diagnostic codes which the car pc has saved into its memory. These codes are gathered above time within the CF card of X431 Diagun III, and until the vehicle battery has become disconnected, they need to remain in memory. The X431 Diagun scan tool will display these codes, together with standard knowledge info concerning the code.

Step five: write down the codes which might be shown on the X431 Diagun scan tool. After which you can investigation them on obd2tuning.com Automotive X431 Diagun mend manuals for the make and product of car may have a list of these codes and whatever they imply. Several OBD-ii codes be adopted by numerous quantity, and can begin using a letter, such as U-303, and they are tripped by sensors the laptop or computer displays regularly. When these sensors ascertain a little something is wrong with all the OBD2 Motor, the OBD2 code will be saved on you Pc, to ensure the automobile mechanic can figure out the problem and restore it.

(resouce  http://www.obd2tool.com/category-35-b0-Launch+X431.html)

PIWIS II Wifi for Porsche OEM Wireless Solution Released!

We now have PIWIS II Wifi for Porsche OEM Wireless Solution Released!

PIWIS II Wifi for Porsche OEM Wireless Solution Released! The wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi singal is really strong, which over 30 meters strong singal.

The product descprtion page please click here>>

If you want buy PIWIS II WIFI with laptop, please click here>>

PIWIS II WIFI

PIWIS II WIFI

 

For the piwis ii wifi settng, firstly you need connect the USB cable to laptop, then setting in [VCI Config] by inputing the SSID and Password of router.

A prerequisite for using wLAN is the availability of a suitable infrastructure. The workshop safety
guidelines must also permit the use of radio networks.
Connect the VCI to the PC using the supplied USB cable and start the VCI configuration software.
This can be accessed via the relevant link in the basic software.
The necessary setup steps are described separately in the section entitled wLAN configuration.

In order to establish a wLAN connection, the USB connection must be removed once
configuration has been completed successfully.
This is because once established, the USB connection is always active.

PIWIS II WIFI laptop connection

PORSCHE PIWIS TESTER  II WIFI laptop connection

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER

Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

GM Tech2 Parts

GM Tech2 Parts information,with the following gm tech2 parts,your GM Tech 2 will be more powerful.

32 MB Card For GM Tech2

32MB Card,works with GM TECH2, includes a 32MB PC Card loaded with the latest released GM Software.We are available with six kinds of software including SAAB, OPEL, GM, ISUZU, Suzuki and Holden.

32 MB Card For GM Tech2

OBD2 16PIN Connector for GM TECH2

OBD2 16PIN connector for GM TECH2, it is only a obd2 connector, can not use alone. It is for those customer who has gm tech2 but want have one more connector.

OBD2 16PIN Connector for GM TECH2 Diagnostic Tool

TIS2000 CD and USB Key for GM TECH2

This is TIS2000 software for GM TECH2, especially for GM car model.With TIS2000 CD and USB KEY,GM Tech2 can be used for programming.TIS2000 support cars until 2007 year.

TIS2000 CD and USB Key for GM TECH2 GM Car Model

Main Test Cable for GM TECH2

Used together with GM TECH2, can not works alone. It used to connect GM TECH2 with car for diagnose.

Main Test Cable for GM TECH2

GM Tech2 VCI Module

If your GM Tech VCI is bad, you can buy a new GM Tech2 VCI module.

GM Tech2 VCI Module

CANDI Interface for GM TECH2

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnosis on a vehicle that uses the CAN interface, you will need the Tech 2 Flash and a CAN diagnostic interface module.

The CANDI module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the CANDI module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.Includes the CAN diagnostic interface module and instruction sheet.

CANDI Interface for GM TECH2

scanner vcs

Scanner VCS Vehicle communication Scanner

Jual Scanner VCS Vehicle communication Scanner

Scanner VCS ini merupakan Cloning AutoBoss berbasiskan komuniasi usb dan jangkuan pemakaian diagnosis untuk mobil eropa dan asia,
disamping itu fitur yang paling handal yaitu kemudahan instalasinya dan kemudahan operasionalnya cocok sekali dipakai oleh teknisi yang profesional maupun pemula
Tampilan scanner ini sangat mudah difahami serta dengan gambar yang besar menjadikan scanner ini banyak sekali peminatnya

 

VCS juga menampilakan  informasi spesifik – kode produsen tertentu, kode pabrik, dan kode kesalahan generik pada sirkuit listrik tertentu.
Quick Test & Cepat Delete (pilih software)
Fitur Quick Test memungkinkan Anda dengan cepat memindai semua sistem di dalam kendaraan,
Mengidentifikasi pengendali dengan kesalahan dan menyediakan akses langsung ke sistem-sistem tanpa harus menavigasi melalui beberapa menu.
Tingkat respon kecepatan tinggi 8-10 frame per detik w / real-time pemecahan masalah hingga 4 grafik. Mendiagnosa sinyal untuk kondisi kaya atau ramping dengan pengambilan data hidup dan tampilan modul dalam format digital dan analog.

fungsi scanner ini sebagai berikut :

Baca DTC
Clear Diagnostics Kode Kesalahan DTC
Mendukung diagnosis dan membaca modul ECU
Diagnostik yang tepat dari semua ECM.
Diagnosis Power train,
Diagnosis Chassis dan body sistem 
Satu klik “Quick Test” tombol untuk memindai semua ECU
Menampilkan data List
Menampilkan Osiloscop bentuk  gelombang
Dukung Aktif Test
Program Ulang, ulang dan adaptasi,
Kalibrasi dan fungsi sistem Sensor
Diagnostik elektronik ECU.
Hyundai dan VW / Audi immobilizer fungsi khusus
Inisialisasi ECU dan coding
Menguji Komponen & Sistem actuations
Inisial Fungsi kecepatan idle

demo VCS

Fungsi Khusus:  Layanan Mereset & Inisialisasi:

Ketika komponen (misalnya injector, switch, sensor aliran massa udara, sensor suhu pendingin, dll) akan diganti dalam sebuah modul, kendaraan akan berjalan sangat kasar. Inisialisasi segera kembali menyesuaikan-semua nilai, sehingga komponen akan diakui oleh sistem kendaraan. (Misalnya Untuk mereset indikator pelayanan untuk kendaraan seperti “minyak layanan”, “layanan pengingat light”, “sensor sudut kemudi *”, dll)

Penyesuaian atau Adaptasi:
Kendaraan Komunikasi Scanner VCS mampu menyesuaikan parameter kinerja. (Misalnya RPM menganggur, penyesuaian kecepatan idle, timing pengapian, kendaraan w / immobilizer, sinkronisasi mengatur bahan bakar, belajar kembali throttle tubuh, DME Alignment, dll) Fungsi lain: Self-belajar Fungsi Buat sistem database pribadi untuk merekam kondisi ideal dari nilai yang sebenarnya dalam sistem kendaraan.

Rekam 160 Frames Live data 
Rekam data real-time streaming hingga 160 frame selama siklus drive. Diagnosis lebih rumit dari masalah intermiten akan memerlukan penggunaan fungsi ini untuk mengevaluasi aliran data selama perjalanan siklus dikendalikan didukung model mobil:

Menguji Komponen & Sistem actuator
Lakukan tes verifikasi untuk memvalidasi fungsionalitas dari rangkaian listrik tertentu. Fungsi ini akan memotong tenaga kerja memakan waktu untuk memeriksa pengerjaan komponen elektronik seperti switch, sensor, relay, & aktuator. Gunakan VCS untuk menjalankan modul kontrol dan melihat apa yang harus diganti tanpa menghapus panel dan pengujian tanpa penggunaan multimeter. (Misalnya silinder uji keseimbangan kekuasaan, sistem EVAP kebocoran, EGR valve, solenoid, power window, wiper aktivasi winshield, dll)

Asia
untuk Acura. untuk DAEWOO. untuk DAIHATSU. untuk HON DA. untuk HYUNDAI. untuk INFINITI. untuk ISUZU. KIA. untuk LEXUS. untuk MAZDA. untuk MITSUBISHI. untuk NISSAN. untuk Perodua. untuk PROTON. untuk SSANGYONG. untuk SUBARU. untuk SUZUKI. untuk TOYOTA

Australia
untuk AUSFORD. untuk HOLDEN

China
BYD. Chana. CHANGHE. CHERY. FDQC. untuk FUTIAN. untuk Geely. GWM. untuk HBSH. untuk Huachen. untuk LIFAN.WULING

Eropa
untuk ALFA. untuk AUDI. untuk ben z. untuk BM W. untuk CITROEN. untuk EURFORD. FIAT. Untuk JAGUAR. untuk LANCIA. untuk LANFROVER. untuk Opel. untuk PEUGEOT.untuk PORSCHE. untuk RENAULT. untuk SAAB. untuk SEAT. untuk SKODA. untuk SMART. untuk VOLVO. untuk VW Bahasa tersedia 1, Bahasa Inggris 2, Spanyol, 3, Cina (Tradisional) 4, Cina (disederhanakan) 5, Rusia

Specification:
Power Supply: 8-12VDC, 110-250VAC, 50HzConnection: Wireless atau USB
Sistem PC Minimum Requirement (tidak termasuk):
Windows XP
CPU 300MHz
memori 256MB RAM
1GB Hard Disk Memory
CD Drive
Bekerja Suhu: 10 – 176oF (-10 – 80oC
Kelembaban : <90%
Dimensi: 20 “X 14″ X 6 ”
Berat: £ 17,6 Highlights

1pc x VCS unit utama
1pc x OBD2 kabel
1pc x kabel USB
1pc x CD

How to Reinstall Launch X431 V Client

Steps to reinstall Launch X431 V Client:

Step1: Uninstall X431 V Client First
Step2: Delete “cnlaunch“  from these 2 files

Step3: Go to www.dbscar.com website to download the newest version for X431 V client, then install itStep4: Open the installed Client,log into your CC accountStep5: Download software (As the below picture)

Notice: The X431 V you downloaded will be saved in “downloads”, like picture shows:

http://www.obd2tool.com/goods-4523-Launch+X431+V+%28X431+Pro%29+WifiBluetooth+Tablet+Full+System+Diagnostic+Tool.html

How to use FGTech Galletto 4 Master BDM-TriCore-OBD Function FG Tech ECU Programmer

Decrypt and crypt slave file user manual.
This ECU device FGTech Galletto 2-Master can help program Windows 2000, Windows XP 32 e 64 bit, Windows Vista 32 e sixty four bit, Windows 7 32 e sixty four little bit.
Once you related it to your computer and find out the subsequent display, just click “Master” button to open up portion:
FGTech Galletto 4

Once you have loaded the crypted file of one’s slave inside the initially row, be sure to identify the uncrypted file inside the 2nd row like underneath, and click on “Decrypt & Save” button.

FGTech Galletto 4

Now you’ve got saved the uncrypted file name “ORI.DEKRIPT”.
Finally, you can tune the file. But before you send your dealer, you might have crypt it again.
For crypting you have got to load the crypted file recived from the first row of Crypt
Part, then load the (uncrypted) tuned file in the 2nd row and write title during the third row of the final crypted file to send.
As this:

FGTech Galletto 4

Now you can just click on button “Crypt & Save” and Exit.
Wanna know whether this ECU device FGTech Galletto 2 Master supports your car model? Click on here: support Vehicle List.

 

FGTech Galletto 2-Master 

 NEW SYSTEM PROGRAMMING USB THROUGH THE TAKING OF DIAGNOSIS

Now only OBD function, do not have BDM Function, please pay attention.

The system comes complete with all Cars, Trucks, Traktors and bikes. New Boot Mode System Tricore Infineon Tricore Sak TC1766, Sak TC1767 *new Infineon Tricore sak TC1792,TC1796,TC1797,TC1767
READ / WRITE New BMW by OBD2 port.
The interface work with this Operating System:
Windows 2000
Windows XP 32 e 64 bit
Windows Vista 32 e 64 bit
Windows 7 32 e 64 bit

Vehicle list please download from our technical service.

FGTech Galletto 2-Master EOBD2 language available: Italiano, English, Deutsch, Francais, Espanol,  Portugues, Czech, TurkishFGTech Galletto 4 Master