Digimaster3 Software,How to install

Yanhua Digimaster 3 Odometer Correction (shortly called D3) is best mileage tool which made in original Guangxi Yanhua Factory in China, this tool is a touch-screen unit with powerful function.

After you get it, you need install and activate it.

To help customers use easier, before shipment, our obd2tool.co.uk warehouse would help you install and activation well before shipping.

Some customer who have interest in digimaster3 scanner can check How to install and use digimaster3 software the step below

1 Installing D3 tool

step 1:Double-click the installation files in the CD.

digimaster3-software-install-1

step 2: Choose the route of installation

step 3:Open the software interface as below after installation

digimaster3-software-install-2

2 Connect the D3 with PC and internet

Step 1:Connect the D3 USB with pc.Click “cancel” after the window bombed as below

digimaster3-software-install-3

Step 2:Click “ok” to close the bomed warming dialog.

digimaster3-software-install-4

Step 3:The below window will appear after successful connecting with device

digimaster3-software-install-5

step 4: Just reconnected the USB cable if the USB connecting is cut showed as below windows.

digimaster3-software-install-6

Hope it would help you.

How to update PIWIS Tester 2 For Porsche software to V15.600

Today we’d like to share with you how to update the Piwis tester2 for Porsche software to latest V15.6

PIWIS Tester II For Porsche diagnostic software has newly updated to V15.600. Here is the detail software upgrade instruction provided.

Software version: PIWIS V15.600

best-quality-piwis-tester-ii-for-porsche-9[1]

 

piwis-tester-update

Updating including device :

PIWIS Tester 2 For Porsche , Allscanner VCX Porsche piwis tester, Original YANHUA Porsche tester 2, VXDIAG MULTI Diagnostic Tool for Porsche and LandRover etc.

Operating system need:
Windows XP only (CF-30 laptop CPU: 9300 4GB RAM is recommended)

How to update Porsche PIWIS software to V15.600?

1. Please insert the upgrade DVD into DVD rom, then choose [Tools- DVD Upgrade] the software will install automatically.

2. Click [Yes] to confirm released DVD installation prompt;

piwis-tester-update-1

3. Click [OK] to confirm the setup.

piwis-tester-update-2

4. When you seen these screens, you need wait with patient, it might cost around 4-7 hours to finish the whole upgrade process.

piwis-tester-update-3

piwis-tester-update-4

piwis-tester-update-5

5. Open the software after computer reboot, check the Porsche Tester 2 V15.600 software information.

piwis-tester-update-6

piwis-tester-update-7

piwis-tester-update-8

That’s all for the steps, have you got it ?

Warmly welcome to www.obd2tool.com

FAQ about MultiDiag J2534 Pass Thru installation

multi-diag-access-j2534

1. Q: Can I install Multi-Diag Access J2534 Pass Thru truck diagnostic tool and another car dianostic tool in the same computer?

A: We suggest you not to put two auto diagnostic softwares in the same computer, because they may interrupt with each other.

2. Q: I came across this problem when installing my MultiDiag J2534 diagnostic tool. I have taken a picture of the problem. I have tried to install the software on a Windows XP, a Win 7, Win 7 starter and a WIN 7 prof PC, but the error window just came up no matter how. What could cause the problem? What should I do?

multidiag-j2534-pass-thru-installation

 

A: Please download the XP system we provided, copy the software into a CD and insert the CD to install the software according to our installation video.

3. Q: When I was intalling the J2534, I always received a error message, reading “UCE no response”. I have tried the tool on several cars, and always got the same message. What is the problem?

A: It is properly that the driver couldnot recognize the software. Please try the tool on 2000-2008 VW cars and see if the tool can work alright.

4. Q: Do I have to activate the Multi-diag J2534 software when using it to diagnose Vlovo vehicles?

A: Yes, it needs activation to work on Volvo cars.

Comparison Table among all Mangoose

Comparison Table among all Mangoose:

Item Number SP116 SP205 SP205-B SP216
Color Blue Blue Blue Orange
Support Vehicles Jaguar and
Land Rover 2005-2014
Land Rover and
Jaguar from year 2005 to 2014
Land Rover and
Jaguar from year 2005 to 2014
Jaguar from 2005-2014
Land Rover from 2005-2014
Toyota from 1996-2014
Volvo from 1996-2013
Language English, German, Russian,
French, Dutch, Portuguese,
Japanese, Spanish, Italian
and Simplified Chinese.
English(United States), French,
German, Italian, Japanese,
Portuguese, Russian, Spanish,
Dutch and Simplified Chinese
English(United States), French,
German, Italian, Japanese,
Portuguese, Russian, Spanish,
Dutch and Simplified Chinese
English(United States),
French(Standard),German,Italian,
Japanese, Korean, Portuguese,
Russian, Spanish,Dutch,
Chinese(Simplified)
Software Version JLR SDD V142 JLR SDD V142 JLR SDD V142 JLR: V142
Volvo: 2013D
Toyota: V9.30.002
Update Via CD Via CD Via CD Via CD
PC OS Requirement Win7 and Windows XP Win XP/Win 7/Win 8
( Not all WIN 7/WIN 8 system
can install JLR SDD V142)
Win 7 Windows XP

Customer Feedback:                                                                                                                SP205 has more security features, overvoltage reducers
so should work more stabel than SP116

E-Mail:  sales@obd2tool.com

MB SD C4 Locked ? How to Solve?

Here we’d like to share with you How to Solve MB SD C4 Locked Problem

MB SD C4 diagnostic multiplexer Some users who get serial number 101923 or 101044 may get the device locked problem by misuse.

mb-sd-connect-compact4-star-diagnois-new-a[1]

MB-Star-C4-locked-problem

There are 3 possible reasons caused this problem:

1) Update the MB SD C4 firmware.
2) Have not configure the LAN& Wireless connection setting
3) Had the built-in WIFI card replaced

Obd2tool.co.uk engineers after checking and found the Solution:

1) MB SD C4 can not be upgraded. Please do not try to update MB SD C4 firmware
2) Configure the LAN and wireless connection setting. Check step-by-step WIFI setting guide in our webpage technical support.
3) Do not replace the original WIFI card included in the package.

If fail to get the device back to work, please try press “i” and “v” together during boot to check PM PIC firmware version. Contact our customer service to unlock your Benz MB SD C4 multiplexer.

Hope it would help you.

Welcome to www.obd2tool.com

ICOM A2 A1 fw 1.38 update files download and operation steps

 

Why need upgrade ICOM firmware?

To run ICOM A2 A1 with the newest ISTA-D Rheingold 3.49.30 ISTA-P 55.4.000, user is required to update firmware to the newest version.

Current SYSTEM IMAGE version: 01.24.00

Current APPLICATION IMAGE version: 01.38.01

 

Which version of ICOM the upgrade files and steps apply to?

The following upgrade guide applies to both perfect vesion ICOM A2 and common version ICOM A1 A2. UOBD2 identify them via item NO.

Perfect vesion ICOM A: item NO SP168-BA and SP168-BO

Common version ICOM A1, A2: item NO SP168-C, SP168-B, SP168 and SP168-D

All BMW ICOM list: http://www.uobd2.net/producttags/bmw-icom_p2.html

 

ICOM upgrade firmware steps:

YouTube Video demo: https://youtu.be/E5mLaZq__YM

 

  1. Perfect ICOM A1 A2 fw 01.38 / 01.24 free download at:

http://down.uobd2.net/icom-a1-a2-1.38-firmware-upgrade-files.zip

  1. Please connect super ICOM A2 with computer using internet cable, and supply power for super ICOM A2 using 12V power adapter or by connecting with BMW.
  1. Unzip perfect ICOM A1 A2 fw 1.38 upgrade files.

perfect icom update-01

  1. Use Network cable to connect perfect version BMW ICOM A2 with computer, supply power for ICOM A2 with 12V power adapter or connect ICOM A2 with the BMW vehicle.
  1. Open IE Internet Explorer, enter address http://169.254.33.45:60080/, log in with username/password: root/NZY1150263

OS: to upgrade common version ICOM A2 A1, browse http://169.254.92.38:60080/ and the next steps are the same.

root-02

  1. Click “Update Firmware”, you will see ICOM firmware version information.

update firmware-04 update firmware-03

  1. Click “Browse” to select file “ICOM-BootImage-01-24-

select file-05

  1. When it pops up “Write the image file to the flash?”, click “Yes”, then ICOM indicator light will turn red.

to flash-06

  1. When it pops up “The SYSTEM IMAGE update was successful”, click “Update Firmware”.

click update firmware-07

 

  1. Choose “ICOM-ApplicationImage-01-38-01.bin”, set image type as “APPLICATION”, click “Send the file”, it will spend several minutes since the file is a little bit large.

select file-08

 

  1. When it pops up “Write the image file to the flash?” click “Yes”, then the ICOM indicator light will turn red for the second times.

to flash-09

 

  1. When it finish upgrading, click “reboot”.

 

  1. Click “Home” – “Update Firmware”, you will find ICOM A2 firmware update to the newest version:

Current SYSTEM IMAGE version: 01.24.00

Current APPLICATION IMAGE version: 01.38.01

 

Additional Note:

Please be sure your computer is to obtain IP address automatically.

AutoBoss V30 Scanner

The V30 automotive diagnostic scanner is the most competitive, full featured European and Asian scan tools on the market today. With our continuous software update, R&D support in troubleshooting and hardware technical support, V30 sets itself apart from all competitors. With its fantastic functionality, it will become your problem solver and a money maker.

Function:

Covering late and early model car of Asian, European, American and domestic.
Supporting CAN- BUS diagnosis of Volkswagen / Audi, Ford, Mazda, Nissan, Hyundai / KIA
Built-in high / low speed CAN- BUS and single CAN- BUS
Making all CAN- BUS systems available with only one connector
Supporting 5 OBDII protocols and 9 modes
Nissan idle speed adaptation
Immobilization system generation III adaptation of Volkswagen.

1. Live data graphic display

2. Full component activation

3. Read & change ECU coding

4. Setting of adaptation values

5.CANBUS function supported

6. Internet update function

7. HYUNDAI immobilizer

8. Testing report saving function

9. VOLKSWAGON immobilizer III

10. Coding of the new control modules

11. NISSAN idle speed self learning function

12. Multi-language for international market demand

13. Hand-held independent operation, supporting PC link

FNR Key Prog 4-in-1 Key Prog for Nissan Ford Renault FAQ

Do you looking for a key programmer for Nissan, Ford, Renault? Easy to instal and use key programmer? Eobdtool recommend a  4-in-1 FNR Key prog for Nissan/Ford/ Renault.

13875951230 FNR Key Prog 4 in 1 Key Prog for Nissan Ford Renault FAQ

FNR Key Prog 4-in-1 for Nissan Ford Renault equals to Ford key prog+ Renault key prog+ Nissan key prog+ Ford Incode Calculator,very simple and user-friendly software interface, do not need any PIN codes or access to Renault.net. FNR Key Prog 4-in-1 for Nissan Ford Renault support English only, come with Ford key prog v1.1.2  Renault key prog v2.3.1  Nissan key prog v2.3.1 Ford incode calculator v1.0 softwares.

 

FNR Key Prog 4-in-1 Key Prog for Nissan Ford Renault FAQ:

 

Q1: I get “NO DONGLE FOUND” error, after install and plug the FNR software and USB Dongle?

A1: You need install the crack file as well, please kindly check and confirm

Q2: When i install the software FNR key prog 4-in-1, i follow the manual to install it, everything is right,
but i still get the error prompt “run-time error 8002invalid port number”, what is the problem?
A2: For this product, usb com port need to set up to com12.
Q3: When it shows error on the screen, I click OK, then I quit the software page, why?
A3: You need to check the chip type, if it is compatible. If yes, that means this tool can not do your car.

 

How to update Autel MaxiSys Pro software and firmware

MaxiSYS Pro MS908P diagnostic system

 

The original MaxiSYS® Pro  diagnostic system has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis. Following are the firmware and software update instructions of Maxisys pro (MaxiSys Pro MS908P, MaxiSys MS908 and MaxiSys Mini MS905 )provided.

MaxiSYS Pro MS908P diagnostic system

Update MaxiSys Firmware

 

The internal programming of the MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database.

 

The display device automatically searches for available updates for all of the Maxisys components when it is connected to the internet. Any Updates that are found can be downloaded and installed on the Autel Pro scanner. This section describes installing an update to the Autel MaxiSys pro Diagnostic System firmware. A notification message displays if an update is available when the Notifications function is enabled in the Settings applications.

Sample update screen

Autel-Maxisys-Pro-MS908P-update-1

  1. Navigation and Controls

 

Home Button-returns to the MaxiSys Job Menu

Update All-updates all available updates

Search Bar-search specific update item by inputting the file name, for example, a vehicle make

 

  1. Status Bar

 

Left Side-displays the MaxiSys device model information and serial number

Right Side-displays an update progress bar indicating the completion status

 

  1. Main Section

 

Left Column-displays vehicle logos and update firmware version information; tab the About button displays a function list in PDF showing more details about the firmware.

 

Middle Column-displays a brief introduction about the new changes to the firmware operation or capabilities. Tap Autel-Maxisys-Pro-MS908P-update-2button to open an information screen to view more details, and tap the dim area around to close the window.

 

Right Column-according to the operation status of each firmware item, the button displays differently.

  1. Tap Update to update the selected item
  2. Tap Pause to suspend the updating procedure.
  3. Tap Continue to go on updating the suspended update

 

To update the firmware

 

  1. Power up the MaxiSys pro tablet, and ensure that it is connected to a power source and with steady internet connection
  2. Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays.
  3. Check all available updates:

If you decide to update all the items, tap the Update All button

If you want to update some individual items, tap the Update button on the right column of the specific item.

 

  1. Tap the Pause button to suspend the updating process. When you tape Continue to renew the update, the updating process will resume from the break point.

 

  1. When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if thee is one.

 

VCI Manager Operations

 

 

This application allows you to pair up the MaxiSys Display Tablet with the VCI device-the Wireless Diagnostic Interface, and to check the communication status.

VCI Manager screen

Autel-Maxisys-Pro-MS908P-update-3

  1. Connection Mode- there are two connection modes available for selction. The connection state is displayed alongside.

BT Paring-when paired to a wireless device, the connection state displays as Paired; otherwise it displays as Unpaired.

Update(for VCI software only)-Update VCI software via internet through the MaxiSys tablet networking using USB connection.

 

  1. BT Setting

The BT Setting screen displays the type and a partial serial number for all of the device available for pairing. Tap a required device to start paring. The BT status icon displayed to the left of the device name indicates the received signal strength.

 

BT Paring

The VCI module needs to be either connected to a vehicle or to an available power source, so that it is powered up during the synchronization procedure.

Make sure the MaxiSys Display Tablet has a charged battery or is connected to an AC/DC power supply.

 

To pair the VCI module with the MaxiSys system

 

 

  1. Power on the MaxiSys display Tablet
  2. Connect the 26-pin end of the data cable to the J2534 ECU Programming Device’s vehicle data connector
  3. Connect the 16-pin end of the data cable to the vehicle data link connector (DLC)
  4. Tap the VCI Manager application on the MaxiSys Job Menu of the tablet
  5. Select BT from the connection mode list
  6. Tap the Scan button at the top right corner. Now the device starts searching for available pairing units.
  7. Depending on the VCI type you use, the device name may display as Maxi suffixed with a serial number. Select the required device for pairing.
  8. When pairing is successfully done, the connection status displayed to the right of the device name is shown as Paired.
  9. Wait a few seconds, and the VCI button on the system Navigation bar at the bottom of the screen shall display a green tick icon, indicating the display tablet is connected to the VCI device.
  10. Tap the paired device again to unpair it.
  11. Tap the Back button on the top left to return to the MaxiSys Job Menu.

 

NOTE:

A VCI module can be paired to only one Display Tablet each time, and once it’s been paired, the device will not be discoverable for any other unit.

 

Update VCI Software

Before update the VCI software, please make sure the MaxiSys tablet network connection is stable.

 

To update the VCI device software

  1. Power on the MaxiSys display tablet
  2. Connect the VCI device to MaxiSys tablet via USB
  3. Tap the VCI Manager application on the MaxiSys Job Menu of the display tablet
  4. Select Update from the connection mode list
  5. The current version number and the latest version number of the VCI software will be displayed after a few seconds, click Update Now to update the VCI software if available

How to Instalaltion VXDIAG VCX NANO For Ford/Mazda IDS V95

VXDIAG VCX NANO for Ford and Mazda 2 in 1 diagnostic scanner comes with V95 IDS.  Customers asked us how to installation this software. Following us, today we’d like to tell you the intruction step by step

VXDIAG VCX NANO for Ford and Mazda Basic Information:

Software version: Ford IDS V95, Mazda IDS V95

Language:

English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil)

Operating system:

Win XP SP3 PC made 2000 year up

Computer has at least 4GB Memory

Install VXDIAG Ford & Mazda IDS V95 software on VMware:

1) Install VMware Player

Open CD Driver

Install VMware player

sp239-1

Click “Next”

Accept license agreement, click “Next”

Click “Next”

Uncheck the software updates notice, press “Next”

Uncheck and click “Next”

Click “Next”

Click “Continue”

Click “Finish” when VMware player is well installed

sp239-2

sp239-3

2) Configure VMware

Copy Ford IDS95 VM file to disk C://

Open VMware on deaktop

Select open a Virtual Machine

sp239-4

Select “Play virtual machine”

Run VMware

3) Connect VXDIAG scanner

Connect VXDIAG VCX NANO Ford/Mazda scanner interface with computer

Select “Connect” tab

sp239-5

If you want to perform programming functions, you need to connect the network.

Open “VCM II Manager” on the desktop to check the connection

sp239-6

 

sp239-7

4) Run Ford/Mazda IDS V95 software

Open “IDS” setup on desktop

Check communication in Wireless Device Manager interface

sp239-8

Select Information option to check software version and VXDIAG firmware information

Click car icon to establish communication to PCM

After well communication is built, the IDS will display vehicle information

sp239-9

sp239-10

Stat to run Self- Test and read codes

Select specific control module and view freeze frame, live data etc

sp239-11

sp239-12

Hope it would help you, If any questions, please contact us at Sales@obd2tool.com