(Review) How do I use GM TECH2 to replace Opel Corsa C ECU

This article is just sharing real experience when use GM Tech2. Hope this helps someone.

I decided to invest in some tools to diagnose my Opel. After a couple weeks of searching all over ebay, aliexpress and other online store, I finally found the cheapest one on OBD2TOOL, they were very fast to respond and answer all of my questions. I exchanged emails with Customer service for about 3 days before I finally decided to purchase a tech 2 clone here. I ordered it on Tuesday and I picked it up at Friday (I missed the fed ex guy and you have to sign for it). Yes, it only took 3 days delivery!

I paid $349 for it. The quality of this is amazing. I would never be able to tell it was a clone. I hooked it up to my car and was able to replaces Opel Corsa-C ECU.

So here it is….

http://forobd2tool.com/wp-content/uploads/2017/08/1/9-1.jpg

http://forobd2tool.com/wp-content/uploads/2017/08/1/9-2.jpg

http://forobd2tool.com/wp-content/uploads/2017/08/1/9-3.jpg

Below is the procedure, I search and learn from forum members:

Obtain all ECU pin codes especially second hand ECUs (immobilizer or engine). Scan old ECU to obtain VIN code and then obtain car passes to match.
Obtain all keys they will be required at end of procedure. SPS program new engine ECU with vehicle engine code and VIN number.
3. Configure engine ECU CAN configuration (Engine/ programming/ program CAN configuration)
Configure engine ECU variant configuration (Engine/ programming/ program variant configuration)
4. Reset engine ECU if second hand ECU use pin code from car pass (body/ immobilizer / additional functions/ reset engine ECU)
Reset immobilizer (body/ immobilizer/ additional functions/ reset immobilizer)
Reset BCM (body/ BCM/ additional functions /reset BCM)
Reset instrument cluster (body/ instrument/ additional functions/ reset instrument)
5. Program immobilizer function (engine and immobilizer): this will program everything together includes new keys. Have all keys programmed (body/ immobilizer/ programming/ program immobilizer function).
Check and clear all fault codes Engine immobilizer dash BCM ABS and gearbox. Road test and recheck it.

Great! I can see Professional Diagnostic Tool GM Tech 2 replace a new engine ECU for Opel Corsa C successfully!

Where to buy a universal odometer correction tool?

Where to buy a good universal odometer correction tool from a man of his words to trust in? Odometer correction tool ebay?

X300M Obdstar is the one you can have a try.

OBDSTAR Technology Co., Ltd was founded in 2007 and it’s a professional high-tech enterprise which is engaged in researching & developing, producing, selling automotive diagnostic tools.

OBDSTAR has excellent after-sales service team who are providing instant technology support and handling all different kinds of feedback from customers.Meanwhile,they pass the advice from customers to R&D staff, and develop with them together more automotive devices.

OBDSTAR has authorized and cooperate with www.obd2tool.com

for years. 1000% original obdstar tools are confirmed/tested to work on models by Obdexpress professionals.
This is a OBDSTAR X300 M odometer correction car listfor reference.
Vehicle     Model
Audi     A3:2003-2006;2007-

A4:RB4 2002-2005;RB8 2006-2007

A4L:2008-2012;2013-

A5:2008-2012;2013-

A6:1998-2004

A6L:2004-2008;2009-

A8L:2003-2006;2007-2011

Q5:  2008-2012;2013-

Q7:2006-2008;2009-

R8:R8 2007-

S5:2008-2012;2013-

S8:2007-2011

TT:TT 2007-
Bentley     Coninental:-2007;2008-
BENZ     GL:X164

ML:W164

R:W251
Besturn     Old Besturn
CHRYSLER     1500:2002-2005;2000-2001

200:2015;2010-

2500:2003-2005

300C:2011-;-2010

300M:2001-2004;1998-2000

3500:2003-2005

Aspen:2006-

Avenger:2010-;2007-2009

Caliber:2009-;2006-2008

Caravan:2012-;2011;2008-2010;2001-2007

Charger:2011-;2004-

Cherokee:2015

Commander:2005-

Compass:2008-;2005-2007

Concord:2001-2004;1998-2000

Dakota:2004-;2001-2003

Durango:2014-;2011-;2007-2010;2004-2006;2001-2003

Grand Cherokee:2014-;2011-;2005-2010;2002-2004

Interepid:2001-2004;1998-2000

Journey:2008-

LHS:2001-2004;1998-2000

Liberty:2008-;2002-2007

Magnum:2004-

Neon:2001-;1999-2001

New Sebring:2007-;2001-2006

Nitro:2006-

Pacifica:2007-;2003-2006

Patriot:2006-

PT Cruiser:2006-;2002-2005;1999-2001

RAM:2011-;2009-;2006-2008

Sebring:2010-;2007-2009;2001-2006

SX:SX-2.0 2001-

SRI:SRI-5 2005-;SRI-4 2005-;SRI-3 2005-

TJ/YJ/CJ:2007;2003-2005

Voyager:2008;2001-2007

Wrangler:2007-;2003-2005
Citroen     Jumper 2015
Fiat     500   Albea:95040

Brava:95040

Bravo:95040

Croma:95040

Doblo:95040;2015

Ducato:95040;2011-;2015

Grande punto

Idea:95040

Linea:95040

Marelli(Auto)   Palio:95040;MM95160;VDO

Panda:95040;2012

Punto:95040;95160;2015

Qubo

Siena:VDO

Strada:VDO

Uno way:VDO
FORD     C-MAX:2012

Ecosport:type 1;type 2

Edge:2015-(Big color meter)

Expedition:2007-2010

Explorer:2007-2010

Focus:2013-;2009-(Multifunctional screen);-2008(Smaller screens)

Fiesta:2013-type 1 type 2;-2012

Navigator:2007-2010

Kuga:2012;2010;2012- Color meter Monochrome meter

Mondeo:2011-2013 Monochrome screen meter 2 pointer color meter

2007-2010 Monochrome screen meter 4 pointer color meter

New Mondeo:Big color meter;Small color meter;Monochrome screen meter

S-MAX:2007-2010

Taurus:2015-(Big color meter)
Geely     GC9   GX7
GM     Buick:Allure 05-09;Century;Enclave 07-;EncoreEnvision;Excelle XT;GL8 New GL8 Old GL8    Firstland;LaCrosse 2007 -2007;Lucerne 07-    Regal:2007 -2007;Verano 2013

Chevrolet:Alero 98-;Avalanche 07-;Aveo;Camaro 2010-

Captiva;Corvette 2010-;Cruze 2010-   Equinox:2010- 07-09;Express 08-

Express cutaway 08-;Grand AM 98- ;Hornet;Impala 06-;Imtrigue 98-;Malibu 2010-

Montana 00-05;Monte carlo 06-;Silverado 07-;Spark 2014;Suburban 07-;Tahoe 07-

Trax;Uplander 05-09

Cadillac:ATS 2013-;CTS 2013-;DTS 2007-;Escalade (2007-);SRX;STS 2007-

XTS 2013-

Hummer:H2 2007-
GMC     Denali 07-;

Savana 08-;

Sierra 07-;

Terrain 2010-;

Yukon 07-
GreatWall     H9
Hyundai     Accent 24C16;

Azera D70F3423;

Gets 24C16; I20 24C16; I25 24C16;

Mistra

Sonata 9;

Verna 24C16;

Veloster24C16
Infinite     JX352012-;QX602013-
Jaguar     F Series;  XE Series  2015-;  XJ Series  2010
Kia     Ceed:24C16;D70F3423

K4    K5:24C16;D70F3423;D70F3536

Magentis 24C16    Optima:24C16;D70F3536

Rio 24C16

Sorento:24C16;D70F3423;D70F3536

Soul 24C16

Sportage:24C16;D70F3536

Sportage R:24C16;D70F3423;D70F3536
Land Rover     Discovery 4

Evoque2011-

Freelander22013

Range rover:2010-;Sprort 2014
Mazda     Auto identify          Manual Selection:M6(Atenza);M3(Axela);CX5;

CX7 2010-;CX9;M2;M3;M5;M6 2005-2009;2009-2013 2014-
Mitsubishi     Raider 2005-
Nissan     Altima;

Pathfinder;

Teana 2013
Opel     Astra 2010; Combo 2015   ;
Insignia 2010
Peugeot     BOXER 2015
Pontiac     Torrent 07-
Porsche     Cayenne:Cayenne -2009   Cayenne 2010;
Panamera:Panamera 2010
Proton     Previa 2012(24C16);

Preve 2012
Renault     Koleos
Roewe     950
Saturn     Outlook 07-
Seat     NEC+C64 color meter(type 1);

NEC+C64 color meter(type 2);

NEC+C64 13- white meter;
VDO K line ;

Altea:NEC+24C64 VDO

Ibiza :2009(NEC+24C32)VDO;NEC+24C64 VDO

Leon:2009-2010(NEC+24C32)VDO;NEC+24C64 VDO
Skoda     NEC+C64 color meter(type 1);NEC+C64 color meter(type 2);NEC+C64 13- white meter  ;VDO K line;CDC 2007-;Fabia:VDO K line;2007-(NEC+24C32)VDO;NEC+24C64 VDO   Octavia:-2006;2007- CDC;2009-2010(NEC+24C32)VDO;NEC+24C64 VDO

Superb:NEC+24C32 VDO NEC+24C64 VDO
Smart     BR451
Ssangyong     Actyon 24C16
VW     Bora:JC 2013;NEC+24C32 VDO 2009-;VDO K line

Beetle:NEC+95320 MM;Beetle k line

Caddy:CADDY;EC+24C64 color meter(type 1);NEC+24C64 color meter(type 2)

NEC+24C64 13- white meter;2008- CDC

CC:NEC+24C32;NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meter

CDC 2007-;EOS:2006-2007 2008 CDC 2008-(NEC+24C32) NEC+24C64 VDO -12

Lavida:NEC+24C08;NEC+24C32;NEC+24C64 VDO -12;NEC+95320 MMMagotan:2007-2010 CDC;NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meterGolf:GOLF5 -2006;GOLF5 2007- CDC;9S12XHZ512;NEC+24C32

NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meter;VDO K line

GTI:NEC+24C64 VDO -12;NEC+24C64 color meter(type 1);NEC+24C64 color meter(type 2)

NEC+24C64 13- white meterJetta:JC 2013;9S12XHZ512;K line -09Passart:NEC+24C32;NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meter;VDO K line

Phaeton;2003-2007;2008-

Polo;2010(NEC+24C32);NEC+24C64 VDO -12;NEC+95320 MM;VDO K line

Sagitar:2006;2007-2010 CDC;NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meterScirocco:2008- CDC;2008-(NEC+24C32);NEC+24C64 VDO -12

NEC+24C64 color meter(type 1);NEC+24C64 color meter(type 2)

NEC+24C64 13- white meter

Sharan:VDO K line;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meter

T5:VDO K line;NEC+24C64 color meter(type 1);NEC+24C64 color meter(type 2)

NEC+24C64 13- white meter

Tiguan:9S12XHZ512;2008- CDC;NEC+24C32;NEC+24C64 VDO -12

NEC+24C64 color meter(type 1);NEC+24C64 color meter(type 2)

NEC+24C64 13- white meter;NEC+95320 MM

Touareg:2003-2007;2008-

Touran:2006- CDC;NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meter

Transporter:NEC+24C32;NEC+24C64 VDO -12;NEC+24C64 color meter(type 1)

NEC+24C64 color meter(type 2);NEC+24C64 13- white meter

which tool is confirmed to work as a universal odometer correction tool?

New keys programming;…………BothObdstar x300 pro3& X300M worked
Key reading from the immobilizer’s memory;…………Both worked
New immobilizer programming;…………Both worked
New ECU programming;…………Both worked
New mechanical key number programming;…………Both worked
Vehicle Identification number programming;…………Both worked
ECU reset & immobilizer reset;…………Both worked
Easy to operate by the guided menu programming;…………Both worked
New remote programming;…………Both worked
PINCODE reading;…………Both worked
Odometer adjustment (Via obd);…………Both worked

but OBDSTAR X300M is specialized for odometer correction!!

EEPROM/PIC Chip reading and immobiliser initialization ;…………Both worked
With full and strong database for the most important vehicle makes;…………Both worked

which odometer correction tool is better for PSA cars?

Digiprog 3 V4.94 !  it works no issues for Peugeot & Citroen

Peugeot:

Peugeot 508/508 new version

Peugeot 106 diagnostic

Peugeot 206 Programming Jaeger via Micro

Peugeot 206 M2002 NEC All new programming modules via chip

Peugeot 306 VDO Diagnostic Cluster

Peugeot 307 chip programming via Box & Tacho

Peugeot 307 HC12 Microphone Programming

Peugeot 406 Programming Jaeger via Micro

Programming Peugeot 406 Sagem via chip

Peugeot 406 Valeo Box Programming by Box & Cluster

Peugeot 406 VDO Diagnostic Cluster

Peugeot 406 VDO 2000/2001 Cluster + BCU

Peugeot 407 Programming by Tacho & BSI

Peugeot 607 Programming VDO via Cluster Box +

Peugeot 806 Jaeger / Programming Magneti Mareli via Micro

Peugeot 807 Programming by Tacho & BSI

Programming Peugeot Boxer via chip

Programming Peugeot Partner via chip

Citroen

Citroen DS3 93C66 new release DS4 24C16

Citroen C3 / DS3 new releases

Citroen Jumper 2007

Citroen: DS3 C3 C66 Case3: hc12x new release

Citroen C3 programming via Tacho & Box

Programming Citroen C5 via Box & Cluster

Citroen C5 Programming 2003 via chips

Citroen C8 programming via Tacho & BSI

Citroen Saxo New diagnosis

Citroen Picasso NEC Tacho & Box via Micro & Chip

Citroen Relay Van Chip 95040 Chip Programming

Citroen Xsara 2000/2002 NEC programming via BSI & Tacho chips

Citroen Belingo 2003/2004 Cluster and BSI Programming

Programming Citroen Belingo HC08 Tacho via Micro

Citroen C3 programming via the chip

Citroen C5 New software programming via cluster & BCM

Programming Evasion Citroen via puce

Citroen Relay programming via chip

Citroen Xantia programming via chip

Citroen Xsara programming via chip

Programming Citroen Xsara via BCU & Tacho
PSA BSI List V1.2 Tool is a not bad choice also.

Peugeot 307 as of 2005 – …

Peugeot 308

Peugeot 407

Peugeot 607 as of 2006 – …

Peugeot 807 as of 2006 – The …

Peugeot Partner III

Peugeot C8 as of 2006 – …

Citroen C2 2009 …

Citroen C3 II

Citroen C4

Citroen C4 Picasso

Citroen C5 II

Citroen C6

Citroen Berlingo III

Lancia Phedra as of 2006- …

Fiat Ulysse as of 2006- …

You have to do dash and BSI, you’d better have Digiprog III (current V4.94 software) and good soldering skills.

Have fun!

MB Star Diagnosis Coding Out ABC on Mercedes R230 Cars

MB STAR Diagnostic Tools software can code out ABC, here is the example on code out Mercedes SL65.
NOTE : the instruction here only for R230s (not any W215, W216, W220, W221)

To do this, you need a MB Star diagnostic SD Connect C4 with Developer mode. Hook up SD Connect diagnostic system to your car and when it reads your car, select Control Units, pick Information and Communication and you will see ICM :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-1.jpg

After ICM, you will see Control Unit Adaptions :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-2.jpg

From there, choose the year of your model :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-3.jpg
From there, select Special Equipment

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-4.jpg

Select ABC :

http://forobd2tool.com/wp-content/uploads/2017/07/1/25-5.jpg

Then go to the drop down tab and change it from PRESENT to NOT PRESENT, and click F3.
After that, turn off the car, with the doors closed.
Wait 1-2 mins and start the car back up (no more ABC codes and no white or red lights).

How to install SD Connect C4 WiFi on Windows 10

Have good success with MB SD Connect C4 windows 10.

I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.

After days of investigation and testing, the most important thing to understand is this. The drivers for your wireless card MUST support AdHoc functionality. The Benz diagnostic tools are the secret sauce that makes this possible. This can be verified at the DOS command prompt. The command is: netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.

Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.

The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.

Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.

AdHoc can now be verified at the DOS command prompt. The command is:
netsh wlan show drivers
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly

With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity. The procedures for the additional steps required are well documented in OBD2TOOL or GOOGLE.

This is what worked for me. Depending on your computer skills, your results may vary.

If you find my posting to be of help to you, Thanks and Rep would be most appreciated.

Happy motoring !

How to change Mileage for Mazda M6 by X300 M ?

As we were known that OBDSTAR X300M is a special tool for mileage correction.

It can be used on various of car models.

Here is the step to tell how to use OBDSTAR X300m to change mileage for Mazda M6.

First of all, connect the device with car via OBD port.

Start the car models, the original mileage will appeared.

Original Mileage:152550

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-1.jpg14-1

Enter the Menu and Select Vehicle

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-2.jpg

Select Other Vehicle

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-3.jpg

Iginitiation Complete for downloading more models
http://forobd2tool.com/wp-content/uploads/2017/07/1/14-4.jpg

Select Mazda

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-5.jpg

Select Mazda M6

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-6.jpg

Switch Ignition On

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-7.jpg
Select BackUp

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-8.jpg

Input New File

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-9.jpg

Input New Value you want

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-10.jpg

Data Backup Succefully

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-10.jpg

Start Mileage Adjustment

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-11.jpg

Reading Mileage

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-12.jpg

Input New Mileage Data 257898

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-13.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/14-14.jpg
Adjusting Mileage

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-15.jpg

Mileage Adjustment Completed

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-16.jpg

Mileage Adjustment New Display

New Mileage 257898

http://forobd2tool.com/wp-content/uploads/2017/07/1/14-17.jpg

OBDSTAR X300M change KM on Porsche Cayenne 2008

In this article OBD2TOOL enginner will share the experience of how to change KM on Porsche Cayenne 2008 by OBDSTAR X300M Mileage Programmer.

The device you need: OBDSTAR X300 Odometer Adjustment Tool.

X300M Change KM for Cayenne 2008 Procedure(Below picture show the mileage before adjusting 234574km )

STEP 1: Connect OBDSTAR X300M OBDII Vehicle Correction to your Porsche and Power on the programmer.
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-1.jpg
STEP 2: Select VEHICLES->MILEAGE ADJUSTMENT->PORSCHE->PORSCHE V30.12
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-2.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-3.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-4.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-5.jpg
STEP 3:Screen display “initializing…”–>”authorizing…”
Select Cayenne->Cayenne-2009->MILEAGE ADJUSTMENT
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-6.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-7.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-8.jpg
STEP 4:Screen display”communication…”–>enter a filename to save,here input 11100000
OBDSTAR X300M managed to read the curent mileage(error does not exceed 10km)
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-9.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-10.jpg
STEP 5:Input new mileage 345430

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-12.jpg
STEP 6:Screen dispaly”adjusting mileage…”,then adjustment complete.

http://forobd2tool.com/wp-content/uploads/2017/07/1/9-13.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-14.jpg
Finish,the dashboard displays the new mileage as what is set just now.
http://forobd2tool.com/wp-content/uploads/2017/07/1/9-15.jpg

Piwis Tester II with CF30 laptop V18.1 Best Quality A+ for Porsche

Piwis Tester II with CF30 laptop V18.1 Best Quality A+ for PorscheNotice: you can choose ssd hard disk, and  cf52 or cf31 laptop in options. Piwis Tester II from OBD2 is the latest professional tester for Porshe,the most poweful diagnose and offline programmin…

http://forobd2tool.com/wp-content/uploads/2017/07/1/3-1.jpg

Notice: you can choose ssd hard disk, and  cf52 or cf31 laptop in options.
Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access .

Highlight:
1. Software Version: V18.1
2. Laptop: CF-30 (Second Hand, About eight or nine into new)
3. Update one year online free (if you don’t know know to do, please contact our servicer)
4. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
Piwis Tester II Functions:

1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Piwis Tester II by the end of 2010. Piwis Tester I must be used for older models in the  workshop until end of 2010.
4. Support for  Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Piwis Tester II.
5. When  Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:

ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, Car Scanner OBDII system.

http://forobd2tool.com/wp-content/uploads/2017/07/1/3-2.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/3-3.jpg

Notices about LAUNCH ICARSCAN Software installation

Notices about LAUNCH ICARSCAN Software installation

If you are installing Icarscan APP (ezdiag) and software in android system , please pay attention to the above points.

1. If you install Icarscan through scanning the QR code, please do not use the software like QQ or WeChat to scan the APP. Be sure to scan the installation with a web browser.
1

2. If you encounter the following error information, the software is not fully installed.
2
When the software download is complete, please do not click “installing” on the image as below. The system will be installed automatically. No human operation is required.
If you click “installing”, the software will stop installing and it will not work properly.
3
4

The correct operation is shown below, and the system will be installed automatically. Don’t click “installing” with your hands.

5

6

If you click “installing”, the installation will stop.

Then you need to delete the APP and the software and reinstall it.

3. The methods to remove software are as follows:

<1> You have to connect your phone with computer
7

<2> Remove the cnlaunch folder from your phone.
<3> Delete “EZdiag” APP.
<4> Reinstall “EZdiag” APP and follow step 2 to download each car software and special function.

The most important point is software can install automatically. Cannot be clicked ” installing ” during software installation.

4.The language of your phone must correspond to your software language. If your phone’s language is different from the software language, it will cause the software fail to install.

5. If you encounter the following problem, it is also because the software is not installed. So there will be two versions of the software.
8

<1> You have to connect your phone with computer
9
<2> Remove the cnlaunch folder from your phone.
<3> Delete “EZdiag” APP.
<4> Reinstall “EZdiag” APP and follow step 2 to download each car software and special function.

6. You Can’t use two mobile phone bluetooth connection ICARSCAN at the same time: if a mobile phone bluetooth has been connected to ICARSCAN, another phone’s bluetooth will not be able to find the ICARSCAN.

How to update Autel DS808 software & firmware

MaxiDAS DS808 update manual…incl. autel scaner ds808 software and firmware update… Here you go..

The Update application allows you to download the latest released software. The updates can improve the MaxiDAS applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database.

The DS7808 Tablet automatically searches for available updates for all of the MaxiDAS software when it is connected to the internet. Any updates that are found can be downloaded and installed on the device. This section describes installing an update to the MaxiDAS System. A notification message displays if an update is available when the Notifications Center function is enabled in the Settings application

http://forobd2tool.com/wp-content/uploads/2017/07/5/4-1.jpg

1.Navigation and Controls
Home Button – returns to the MaxiDAS Job Menu.
Update All – updates all available updates.
Search Bar – search specific update item by inputting the file name,
for example: a vehicle make.

2.Status Bar
Left Side – displays the MaxiDAS device model information and serial number.
Right Side – displays an update progress bar indicating the
completion status.

3.Main Section
Left Column – displays vehicle logos and update software version information.
Middle Column – displays a brief introduction about the new changes to the software operation or capabilities. Tap oi button to open an information screen to view more details, and tap the dim area around to close the window.
Right Column – according to the operation status of each software item, the button displays differently.

a) Tap Update to update the selected car diagnostic scanner.
b) Tap Pause to suspend the updating procedure.
c) Tap Continue to go on updating the suspended update.

How to update AUTEL DS808 software:

1.Make sure the Display Tablet is connected to a power source with stable access to the internet.

2.Tap the Update application button from the MaxiDAS Job Menu; or tap the update notification message when received one; or tap the Update icon on Vehicle Menu in Diagnostics application. The Update application screen displays.

3.Check all available updates:
If you decide to update all the items, tap the Update Allbutton.
If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).

4.Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume
from the break point.

5.When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

How to update Autel DS808 firmware:
This option allows you to update the firmware of the Car Scanner Connect the scan tablet with the vehicle through DLC or use the mini USB cable for power supply. Follow the on-screen instructions to complete the operation. Internet connection is necessary for this operation.

http://forobd2tool.com/wp-content/uploads/2017/07/5/4-2.jpg

AUTEL DS808 software update completes!