Mercedes SCN coding-1

Mercedes SCN coding service need help (Solved)

Mercedes SCN coding-1

 scn coding meaning:
Software Calibration Number coding, short for SCN coding is intrudes by Mercedes Benz around 2005. It replaced the previous coding technique with a centralized and almost automated technique to prevent incorrect coding being selected when replacing a module.

scn coding service:
Can be done online or offline

mercedes scn coding software:
You should have working XENTRY/DAS (crack ok).
For old Mercedes (-2009), you should have software version 12.2016 or earlier:
For new Mercedes (2009-2017), you should have software version 03.2017 or newer:

scn coding calculator:
Forget it if you find it on some forums. Usually it is a fake program, it will never calculate the SCN string.

mercedes coding forum:

Which version for Mercedes OFFLINE SCN coding? And which for ONLINE coding?
For OFFLINE coding, you should have old versions before 12.2016.
For ONLINE coding, use new XENTRY/DAS after 03.2017

What should i have for SCN coding to my Mercedes?
Star diagnostic tool (sdconnect c4 better, a HQ clone also ok)
XENTRY/DAS (original, or crack version have been tested!!)
Working laptop
Account of Scn coding service

What models (and the year) for SCN coding?
You can have NEW Mercedes for ONLINE coding, while pre-2009 models for OFFLINE coding.
Online & offline coding can be done with different server data. Online scn coding uses data from the Mercedes dealer; it’s original.

I have a 2017 model. Can i have it do offline coding?
No. 2017 new models can be worked though offline coding, with post-2017.3 Xentry/DAS.

When should i have SCN coding?
1. Check engine light on
2. Transmission gets stuck in 1 gear. If your have trouble with transmission, there is a good chance that the problem is with you ME control unit and that SCN coding is needed to resolve the issue.
3. Turn the engine and it on again

Can you give me a coding account? Or where to buy?
For OFFLINE scn coding, it’s xentry offline scn coding activation service

For ONLINE scn coding, you should buy online service (if you have an online account, it’s ok also.):
1.Place an order on the online coding service.
2.Contact our online customer service to process this online coding.
3.Prepare MB STAR C3/SDConnect C4, car, laptop and teamviewer.
4. Select the car model and programming system (eg, headlight XALWA-L)
5.Select CONTROL unit adaptations
6.Choose offline program (CONTROL MODULE PROGRAMMING) then (SCN coding)
7.Provide us your teamviewer User ID and password.
8.Login server (DALMLER)
9.Login server and finish SCN coding automatically

Mercedes SCN coding-2

How to do online scn coding service with Xentry/DAS 2017?
(works for new Mercedes the 2017 year)

Here is the online SCN coding guide.
1. Configure MB STAR:
Come to “SDnet Control” menu>> Configuration >>Network: workshop cable network>> Place a checkmark next to “Automatically obtain IP address”
2. To check the active Internet connection, select Star Browser. The registration window for the after-sales platform should open. Enter the Service Name and password if request.
3. Connect mercedes benz star Scanner system with vehicle
4. Start STAR DAS software program
5. Select Benz model and make: Vans>>V-Class >>Sprinter>>Model designation>>Vehicle recognition. If the vehicle is not recognized, enter the required data manually (e.g. Germany, Rest of World)
6. Entry for retrofits and modifications – Select “Online” (“networked Star Diagnosis device”)
7. Change or enter the vehicle equipment codes: + ED5 (PSM installed), – ED8 (PSM preinstallation).
NOTE: If the vehicle does not have a preinstallation (ED8), ED8 does not need to be changed to ED5.
8. Run a Quick test
9. Come to the EIS (electronic ignition starter switch) control unit>> Control unit adaptation >>SCN coding >>Select the “Online (networked Star Diagnosis unit)” menu option
10. SCN coding will start automatically (visible on the progress bar on the screen). Please strictly follow the STAR diagnostic software instructions. Otherwise the control unit may be destroyed during the coding procedure.
11. When the system display a comment “The coding variant has been changed”, the SCN coding is completed. The parameterization has been completely taken over in the EIS and is thus finished.

How to get mercedes scn coding offline with Xentry/DAS 2015 (or earlier)?

(used for Mercedes-Benz vehicles pre-2009)

Preparation: activation ID
1. After you install the software, you will see below program, send us the correct ID on the upper left corner (marked red circle). Do not send the ID in windows box.
2. Open upper left corner icon, you will see the correct ID:
3. Copy the ID and send it to us. We will resend you a license.
4. Extract the license and run it directly. Then the software will be ready for use.

A) Determine vehicle data for offline SCN coding from the vehicle.
1. Select control unit in DAS.
2. Select menu item “control unit adaptations” or “initial startup”.
Continue with “F3″.
3. Select menu item “SCN coding”. Continue with “F3″.
4. Select “Offline (STAR DIAGNOSIS device not-networked)” menu item. Continue with “F3″.
5. Confirm note on sequence of SCN coding with “F2″.
6. Completely fill out fax form and click “F11″ to print out.
NOTE:If an email address is entered in the fax form, you will be sent the Mercedes Benz Diagnostic Scanner data per email. If a fax number is entered in the fax form, you will be sent the SCN coding data per fax.
7. Send printed out fax form to the given fax no. for the Star Diagnosis Help Desk.

B) Perform SCN coding. The coding is performed with the SCN coding data from the Star Diagnosis Help Desk.
NOTE: If the SCN coding data are received per email, burn the data to a CD or save the data on a USB removable storage device and identify accordingly. Unpack the Zip files first when doing so.
8. In the DAS, choose the “Step 2: Perform SCN coding” menu item. Continue with “F3″.
9.1 Select keyboard input using “F4″.
For SCN coding data per fax.
9.2 Insert CD or connect USB removable storage device.
For SCN coding data per email.
10.1 Enter SCN coding data manually into the DAS.
For SCN coding data per fax.
10.2 Confirm using “F3″ and import the data per CD or USB removable storage device.
For SCN coding data per email.
11 Perform SCN coding.
12. Switch ignition on/off.
Control unit specific, refer to specification in DAS.
13. Press “F11″ to print out the order log and enclose the repair order.
NOTE: The order log can also be stored on the DAS. This is done by clicking on “F11″, “Print to file”, selecting “printout of test step” and entering a file name. In StarUtilities, the StarPad program can be used to display and printout the order log at the “Logs” menu item.
14. Continue with “F2″.
NOTE: The Auto diagnostic tool SCN coding of the control unit is completed. Scrap the CD following successful SCN coding as per the guidelines for theft-relevant parts (DTR 69/00). The scrapping process is to be documented on the repair order. The data on the USB removable storage device are to be deleted properly once they have been used.


How to use WinKFP for FRM3 flash

This WinKFP job was done with BMW ICOM A2 emulator for FRM3 flash after FRM3 repair/reflash by Xprog-m or other programmer the like.

After FRM3 was repaired, then need to flash the correct software in FRM3 module.
The flash can be done with WinKFP, and in 2 ways.
Comfort mode and develop mode!
The develop flash mode you need when the BMW ICOM Software repair dump not exactly belongs to car, and because safety reasons winkfp not leaves to update! In that case You need to use winkfp develop mode, which allows to be flashed any kind of software in any module!

First of all need to update winkfp spdaten.


After spdaten is updated , then open the WinKFP and choose comfort mode and enter ZUSB (bmw zb, part number), will pop up one window where u will see the choosed zb number, accept it!

winkfp-flash-FRM3-2 winkfp-flash-FRM3-3

When You updating with winkfp, then need to enter the LONG vin number!
Then click on done


Now you can start programming!

winkfp-flash-FRM3-5 winkfp-flash-FRM3-6

If you getting error , to can`t update because software incompatibility, then need to do by Develop/Expert mode!

In that case note down the details like in pic 4.
Ecu address, Identification number,PABD,P-SGBD.

Now You need to copy the data file from spdaten (exx/data/module name/coresponding data file) to winkfp develop folder (c://ec-apps/nfs/data/develop)

click on expert mode and choose manually all data what u noted down,and the coresponding zb number also!

Now You can start to flash with expert mode!


BMW Coding Tool Winkfp also have more functions like diagnostic , check aif and so on!
If you like to change vin number in any unit, the winkfp is the easiest way!

After finished the flashing, need to recode with NCS expert!


Kess V2 DPF Off Mercedes Sprinter 315 Biturbo

Topic: Dpf off mercedes sprinter 315 biturbo with Kess v2 master ecu programmer

What is DPF?

A diesel particulate filter (or DPF) is a device designed to remove diesel particulate matter or soot from the exhaust gas of a diesel engine.

What is a DPF in a car?

A diesel particulate filter captures small soot particles, preventing them from being expelled into the atmosphere Photo: ALAMY. … The DPF is designed to catch the diesel exhaust fumes that would usually be emitted in a cloud of black smoke.

What is DPF removal?

From February 2014 the inspection of the exhaust system carried out during the MoT test will include a visual check for the presence of a DPF. A missing DPF, where one was fitted when the vehicle was built, will result in an MoT failure.

What tool for mercedes sprinter 315 DPF Off?

Kess v2 master, clone or original

DPF off Mercedes with Car ECU Programmer Kess v2 v5.017, any success?

Yes, look here:

DPF off Mercedes Sprinter 315 biturbo with Kess v2 master

29-2 29-3 29-4 29-5 29-6 29-7 29-8

Any other solutions of Mercedes DPF off?

Yes, download Professional DPF+EGR Remover 3.0:

(also done with KTAG or KESS)!zV1USZZL!X2mHnpX3Xc09sqYXlOAVgw

Mercedes ECU listed: EDC16C31, Delphi DCM3.4, EDC16C31 Vito and Type2, EDC16CP36, EDC16C3, EDC16C31(2011+)EDC17CP10,M55 Error fixer

Professional DPF Remover 3.0 Car List:

Alfa   : EDC16C39 Type1 and Type2

Audi  : EDC16UX,EDC16CP3 / 34, EDC16U31, EDC17CP14, Siemens PPD v1.1, V1.2, V1.3,    EDC17CP44,EDC17C46,EDC17CP04, EDC16C34-4

BMW  : EDC16C31 – 35, EDC16C31 (1MB), EDC17CP02,EDC16CP35, EDC16C31New, EDC16C35,EDC17CP45    EDC17C41

Chrysler : EDC16CP31

Chevrolet : EDC16C39Citroen  : EDC15C2, EDC16C34, EDC17C10, SID807

Fiat  : EDC16C39(Ducato), EDC16C39 JTD, MJD 6F3, 6F3 Doblo, EDC16C39 Generic, SID803A,    Marelli 8F2, Marelli 8F3,

Ford  : EDC16C34,EDC16C34-2, EDC16C34-2.29, EDC16C34-5, SID 206, SID807, SID803MPC,    SID803A, SID206(SMAX type), SID206 Kuga, EDC16C34 Picasso Type, EDC16C3-9.18

Lancia  : EDC16C39Honda  : EDC16C31, EDC17CP06, EDC16C31(Advanced)

Hyundai / KIA : EDC16C39-D373, KIA EDC16C39 Type2,

Hyundai EDC16C39 Caren, EDC16C39 SantaFE, EDC17C08

Iveco  : EDC16C39

Isuzu  : Denso, Transtron DMax

Jaguar  : SID204, EDC17CP11

Jeep  : EDC16U1, EDC16CP31, EDC17C49

LandRover : EDC16C39-

Ford, SID208

Mazda   : Denso 3-8 all series, EDC16C3,Denso CX7 Type with Adblue, EDC16C34

Mercedes : EDC16C31, Delphi DCM3.4, EDC16C31 Vito and Type2, EDC16CP36, EDC16C3, EDC16C31(2011+)    EDC17CP10,M55 Error fixer

Mini Cooper : EDC16C35

Mitsubishi : Denso (Full 2 types supported), EDC16CP39

Nissan  : Denso,EDC16C36, EDC16CP33 Type1 and Type2, SID305

Opel-Vauxhall : Denso,Denso Signum,EDC16C39, EDC16C9, EDC17C18 – C19, Marelli MJET 75-90cv, Z16DT Marelli,     Denso Signum, Z16DTC, Z19DT

Peugeout : EDC16C34, EDC15C2, SID803 MPC,Delphi DCM3.5, SID803A, Delphi DCM3.4

Porsche  : EDC17CP44

Range Rover  : EDC17CP11

Renault  : EDC16C3 Type1 and Type2,EDC16C32, SID305,EDC16C11

Saab  : EDC16C39,EDC16C9

Skoda  : EDC17CP14, PCR2.1, Octavia19 Bosch,EDC17U01,EDC17CP20,EDC16CP44,EDC17U01

Seat  : Siemens PPD V1.2, PCR 2.1,, EDC17U01,EDC17CP20,EDC16CP44

Subaru  : Denso

Suzuki  : EDC16C3 Type1 and Type2, EDC16C39

Toyota  : EDC17CP07

Volvo  : EDC16C31 Type1 and Type2,SID803MPC,EDC16C34, SID803A Type1 and Type2, EDC17CP22

VW  : EDC16CP34, EDC16U31,,EDC17CP14, PCR2.1, EDC16CP34-4, EDC17U01,EDC17CP20,EDC16CP44    EDC17CP46,EDC17CP52,EDC17P24, EDC17CP44, EDC17CP54

All   : EDC16 – EDC17 ECU’s automatic DPF switch finder item  *  : Some EDC16 and all EDC17 ECU’s solutions are using internal switches.

How to Program BMW F30 FEM Key with CGDI Prog Key Programmer

Here’s the little guide on programming key on a BMW F30 FEM system with CGDI Prog BMW MSV80 Car Key Programmer.

Device required:

CGDI Prog BMW key programmer

BMW FEM/BDC Test Platform for BMW  F20 F30 F35 X5 X6 I3


Disassemble the FEM/BDC module from vehicle


Connect BMW FEM/BDC test platform with CGDI Prog and FEM/BDC module from



Open CGDI Prog BMW software

Select FEM/BDC Key Match


The current FEM BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power supply. Please do not disconnect cable connection during programming procedure.


Please remove the FEM BDC and then use the programmer to read and save the data from the
95xxx EEPROM chip on the FEM/BDC computer board, then click “Next”
Please read the original car EEPROM data




Read eeprom data with Key Programm Tool, i.e Orange 5 eeprom programmer

and save data



User the programmer to write the calculated new data to the 95xxx eeprom chip, then put the FEM BDC back to the car
click Next

Click OK to write M95128

User the programmer to write the calcutaed new data to the 95xxx eeprom chip, then put the FEM BDC back to the car
click Next

Power on BMW FEM BDC test platform

The yellow indicator will flash


Coding is being backed up

The ECU is being programmed

and verify flashing



Program BMW F30 FEM key success


Launch X431 V 8 inch-1

Launch X431 V 8″ tablet scanner user guide: carlist, update, how to, compare

This post put together all Launch X431 V 8″ tablet user guide i.e car list, special functions work, how to register, how to update, how to use on a specific car, comparison with other similar tools, user manual,etc.

1.Launch X431 V 8″ tablet scanner carlist

Works on: Indian cars, Australian cars, Malaysian cars

This is Launch Vehicle Coverage Inquiry System:

2.Launch X431 V 8″ tablet scanner special functions work:

Brake reset, oil reset, SAS reset, BAT reset, bleeding, Elec.trottle RLRN, TPMS reset, DPF Reg, Gear learn, IMMO

Launch X431 V 8 inch-1

3.Launch X431 V 8″ tablet scanner register

register as a member in the official site is necessary, this post offer step-by-step procedure.

4.Launch X431 V 8″ tablet activation:

Does not need to active any more.

5.Launch X431 V 8″ tablet scanner update:

2 years free update online

Download and update the newest diagnostic .apk at


Q: The “Diagnostic” icon is deleted, how to restore it?

Answer: click official site:, login with your ID and password, click on “Download software” then “V for Android” to download the newest .apk.

Actually, the Launch X431 V 8inch package on OBD2TOOL includes a “Quick Start Guide (EN) and user manual follow it to operate.

Launch X431 V 8 inch-2 Launch X431 V 8 inch-4 Launch-X431-V-8-inch-3

6.How to use Launch X431 V 8″ tablet scanner to diagnose reset cars (with pics)

Launch X431 V Ford Steering Angle Sensor Reset+ Clutch Leaning


7.How to use Launch X431 V on newest Honda Ford Mercedes


8.How to use Launch X431 V on BMW, Toyota 2017, VW online coding

Launch-X431-V-8-inch-7 Launch-X431-V-8-inch-8 Launch-X431-V-8-inch-9

9.Launch X431 V 8″ tablet scanner on sale at best price:$799 incl. shipping + 2 years free update online


More to be continued…



OBDSTAR X300 DP renew key PCF79XX adapter unlock Audi 5 Generation key

Host on how to use Car Scanner OBDSTAR renew key PCF79XX adapter to unlock Audi 5 Generation key by working together with OBDSTAR X300 DP(Orange)/ OBDSTAR  key master DP(Green). Besides, OBDSTAR renew key PCF79XX adapter is designed for BMW, VW, Volvo, Chrysler, Renault, GM, Kia, Hyundai etc.

To unlock Audi 5 Generation key, please prepare the two tools:

OBDSTAR renew key PCF79XX adapter

OBDSTAR X300 DP or OBDSTAR key master DP


Plug OBDSTAR X300 DP with VCI box, renew key PCF79XX adapter etc shown as below picture, make sure the indicator lights flash.


FYI, OBDSTAR X300 DP (Orange)VS OBDSTAR key master DP(Green):

They are the same tool, they have same function, save vehicle coverage. They differ from each other in color, the orange one OBDSTAR Scanner X300 DP is supplied on Eshop, so it does not need to waste money to order both two.

Tap X300 DP option “DP” then “Diag Program”.

Tap “Other Function” then “Unlock Key”.

Have option “Renew key V30.01”, click “OK”.


Tap “Audi”, then “5 Generation”


Have 3 options shown as below, go to check the chip board number and tap “Board 233.453.111-05/06


Tap “315MHZ 8T0959754C”


Please refer to the following figure for the correct connecting line.

Pop up “Connect the host to the PCF79XX adapter and supply the 12V power to the adapter.” Tap “OK” and writing data, please wait……


Data Brushing successful, click “OK”


CRP123 premium-4-1

CRP123 and CRP129 premium code readers

CRP123 premium-4-1 CRP123 premium-4-2

The Launch Tech CRP123 and CRP129 code readers, newly upgraded to a “Premium” edition, offer a 4” color display, increased storage, revised button layout for improved navigation and a direct USB connection for ease of updates. The CRP Premium series also includes live data for engine, transmission, anti-lock brakes and air bags. Additionally, the CRP129 Premium adds battery resets to its list of special functions which include steering angle reset, electronic brake reset and oil maintenance light resets.

The CRP123 Premium boosts cost-effective and powerfuldiagnosing features. It supports all of the 10 modes of OBD II test and is ableto diagnose the 4 main systems of worldwide main stream models: Engine,Transmission, ABS and Airbag (SRS). More new systems and functions will beavailable …

The CRP129 Premium upports all of the 10 modes of OBD II test and is able to diagnose the 4 main systems of worldwide main stream models Engine,Transmission ABS and Airbag(SRS), which helps automobile repair professionals dianose and repair vehicles more efficiently,accurately and profitably.

In addition,the CRP129 Premium also supports Electronic Parking Brake (EPB) release,Steering Angle Sensor(SAS) and Oil Servide Light resets etc.

More new systems and functions will be available frequently .

Electronic Parking Brake (EPB) release . Steering Angle Reset. Oil Service Reset. ABS& Airbag(SRS) System.Transmission & More

Works with all vehicles compliant with EOBD/OBDII (most vehicles after 1996).

Go resets special functions, go for CRP129 Premium. It’s a marked improvement of its predecessor, as well as being the world’s first DIY diagnosis product with fully integrated OBDII, Car Model Diagnosis and Engine Oil Lamp Reset.

It also has the ability to record, retain and playback hours of diagnostic data, allowing you to re-examine the date you have collected at a later stage as well as compare the correlated information of multiple instances.

The I/M readiness test shows whether the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and maintenance testing.


Tools Advice for Mercedes Benz E-Class diagnosis on airbags ABS engine transmission

I try my best to test as many Mercedes Benz kits as possible on as many Mercedes E class, in order to make sure that the tools I advice actually do as they claim to do. I purposely triggered faults within the Mercedes E Class cars that I obtained then I triggered a fault/trouble code and dashboard warning light such as engine, ABS or airbags etc. The contents below were collected when reading and clearing fault codes on Mercedes E class vehicles and followed with some photos. These tools include Autel MD802, Autel MD702, Autel AL619, Launch Creader VIII CRP129 and Launch CReader CRP123, FYI, these tools are mainly from site and all are original with good quality.

Use Autel MD702 MD802 to do:

44f1 abs Mercedes Autel MD702 md802

2089-2 Mercedes Autel MD702 MD802


2195-2 Mercedes Autel MD702 MD802

2527-4 engine warning light Mercedes Autel MD702 MD802

9002 srs airbag Mercedes Autel MD702 MD802


9007 Mercedes Autel MD702 MD802


9183 srs airbag Mercedes Autel MD702 MD802

ABS info ECU Mercedes Autel MD702 MD802


ABS info for ECU Mercedes Autel MD702 MD802


Mercedes 2270-4 2137-4 glow plug Autel MD702 MD802


Mercedes 9223 srs fault code Autel MD702 MD802

Use Autel AL619 to do:

Engine warning light Mercedes Autel AL619

Mercedes Autel AL619 p0472


p0130 bank 1 sensor 1 02 sensor


Use Launch CReader CRP123 to do:

Mercedes Creader VIII 9007 SRS airbag warning light fault code

Mercedes 9183 SRS airbag warning light fault code


Mercedes 9222 SRS airbag warning light fault code


Mercedes 9223 SRS airbag fault code

Mercedes O2 Bank 1 sensor 1

Mercedes p0135 Bank 1 sensor 1

SRS airbag warning light

P2239 o2 sensor fault code sensor 1 Bank 1

Use LAUNCH Creader CRP123 Premium to do:

44F1 ABS warning light code

4472 exhaust pressure sensor


9007 SRS airbag fault code

9183 trouble code airbag reset tool fault warning light

9223 airbag srs reset tool


ABS 9222 fault warning code

p0030 fault code O2 sensor 1 blank 1



Well Done !


How to Update Launch Creader VII+ (CRP123) and Creader VIII (CRP129)

Launch X431 Creader VII+(CRP123) comprehensive diagnostic Tool and Launch X431 Creader VIII(CRP129),are lanuch x431 diagnostic scanner,with multi-language available.Support over 20 car models and 4 systems(ABS, Airbag, Transmission and ECU).

How to Update Launch Creader VII+ (CRP123) and Creader VIII (CRP129)?

Step 1: visit and click icon “Update Tool Download”.

Step 2: Download and install “Launch Creader Update Tool “,after installation is complete, run it.

Step 3: in the following picture, select Language (English, Chinese,French and Spanish available) and input product Serial Number (the serial number is in the back of Creader VII+ /Creader VIII).

Step 4: click “Update” to enter the registration page, input Email and Register Code, click “Submit”.

(Note: if you need Register Code, please refer to step 5 to step 8; if you already have Register Code, after submit, skip to step 9. )

Step 5: the register code can be found in the Creader VII+ /Creader VIII, how to find? Connect one end of the USB cable to Creader VII+ / Creader VIII, and another end to the computer.

Step 6: Wait until Launch Creader enter the main menu, then Move the mouse pointer to the “Help” icon, finally press the “OK button.
Step 7: select “Tool Information”, then press button “OK”.


Step 8: the register code shown below is the one needed to enter in the step 4.
(Back to step 4 to input register code and continue)


Step 9: insert TF card into TF card reader, then insert the TF card into the computer.

Step 10: restart the “Launch Creader Update Tool “, select the file you need or click “All”, then click “Download” to start the download.


Step 11: After complete download, take out TF card from TF card reader and insert it into the slot of Creader VII+ / Creader VIII, then supply power for Creader VII+ / Creader VIII by the USB cable (one end of the USB cable connect to Creader VII+ / Creader VIII and another end to the computer) or by the vehicle diagnostic socket (connect the OBDII connector of Creader VII+ / Creader VIII to vehicle diagnostic socket ), after the Creader starts, it popup a window prompting ” System Upgrade- Sure Upgrade?”, select ” OK” to upgrade.


Step 12: update complete!