Lonsdor K518 Program VW Polo 2009 4th IMMO NEC+24C32 Remote Key

Here’s the demo guide on programming VW Polo year 2009 4th IMMO NEC+24C32 smart remote key with Lonsdor K518 key programmer by OBD.

Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: Special ID48 chip (TP23)

Device to program: Lonsdor K518ISE key programmer

4-1
Procedure:

Connect K518 host with vehicle via OBD diagnostic socket

Select Immobilizer->VAG->4th Immobilizer->Identify Immo type

4-2 4-3 4-4

Lonsdor K518 identified immo type: 4th IMMO

4-5
K518 from www.obd2tool.com detect vehicle part number and immo type

4-6
Select NEC 24C32

4-7

Then Backup EEPROM and save data

4-8 4-9

Select Read Immobilizer data

4-10

Lonsdor K518ISE at OBD2 key programmer read vehicle information: VIN, CS, PIN, key number and key ID

4-11

Select Make Dealer Key

4-12

Push card slot on K518 main unit from right direction

Insert new key to be programmed into card slot

4-13 4-14

Select Key Learn

4-15

Enter key number to be programmed (keys that will start vehicle )

4-16

Insert key and turn ignition on one by one

I.E, Dashboard shows 1-2 means 1 key has been learnt, 2-2 means 2 keys have done

4-17

Program success.

4-18

Test remote and star car.

Posted in Auto key Programmer and tagged , , .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>