SEC-E9 Key Cutting Machine Test on Cutting Silca HU100 Key

SEC-E9 is a powerful key cutting machine,it not only support auto key cutting,but also can cut for house key.And there i show the guide on how to use SEC-E9 to cut Silca HU100 key.

Procedures:

Power on SEC-E9 machine,and press “Search” button.

4-1

Enter “HU100”,then press “Search” button,select “SILCA”

4-2

Select “HU100(1097)(8-8)”

Press menu button,and press “info” button to know the basic information.

This key is guided by “Tip”

Then close the window

4-3

Press “decode” to enter the decoding page

4-4

Click the image of three-terminal positioning and press “Round off”

4-5

Check if the original key can work well

4-6

Fix the original key on car key clamp

4-7

Please note the key should be fixed level.

4-8

4-9

Press “decode”,and click the picture of “Clean the groove from chips” to start decoding.

4-10

Take away the original key

Fix a HON66 key blank on car key clamp.

Please not the key blank should be fixed level

4-11

Click “cut” button to enter cutting page

4-12

Press “Speed” and “Normal resolution” button.

4-13

Click the image of three-terminal positioning

You can adjust the cutting depth,usually it is 1mm.

4-14

Press “Cut” button to start cutting.Please remember to close the safe gate.

4-15

Cutting…

4-16

Cutting is done.

Open the safe gate.Clean the clamp,and take out the new key.

4-17

Change the other side of the key blank on the car key clamp for cutting,click “cut” button and close the safe gate.
4-18

4-19

Cutting…

4-20

Cutting is done,open the safe gate and take out the new key by OBD II Scanner.

Try your new key if the new key works.

4-21

Posted in Auto key Programmer and tagged .

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>