Lonsdor K518ISE Program Opel Astra J 2015 Remote Key

New test report: successfully added a remote key on a Opel Astra J 2015 using Lonsdor K518ISE Key Programmer

Note: Pin code is required. You can also read pin with Lonsdor.

Connect K518 host with vehicle via OBD socket

Select Immobilizer->Opel->IMMO->Astra->Astra J->2010-2016->Immobilizer

lonsdor-k518-opel-astra-j-1

lonsdor-k518-opel-astra-j-2

lonsdor-k518-opel-astra-j-4

lonsdor-k518-opel-astra-j-5 lonsdor-k518-opel-astra-j-6

lonsdor-k518-opel-astra-j-7

Read key number

lonsdor-k518-opel-astra-j-8

Turn on ignition switch

lonsdor-k518-opel-astra-j-9

K518 identified current number of keys: 2

Select Add key function

lonsdor-k518-opel-astra-j-10

Close all doors and turn on ignition switch

lonsdor-k518-opel-astra-j-11

Lonsdor K518 required to enter 4-digit PIN and confirm

lonsdor-k518-opel-astra-j-12

Configuring system,wait for 10 minutes

Turn ignition off and remove key

lonsdor-k518-opel-astra-j-13

Insert key to be programmed and turn on ignition

Configuring system

Turn off ignition and remove key

lonsdor-k518-opel-astra-j-14

Open and close driver door, make sure all the electrical appliances are off

Turn on ignition switch

lonsdor-k518-opel-astra-j-15

Program successful

Turn off ignition and remove key

Open and close driver door, make sure all the electrical appliances are off

Configuring system,wait for 45 seconds

Turn ignition to ON position

Turn off ignition

Turn on ignition switch again

lonsdor-k518-opel-astra-j-16

Program completed

Test remote

lonsdor-k518-opel-astra-j-17
lonsdor-k518-opel-astra-j-18

Start engine

lonsdor-k518-opel-astra-j-19

Done.

Author: Eva

Leave a Reply

Your email address will not be published. Required fields are marked *