Solution to Ford VCM2 freezing up when opting parameters

Question: I am able to use Ford VCM II to read and clear any dtcs etc so it is recognizing vehicle, just freezing up when opting parameters ? I am working on Ford 2014 custom.

I have vcm2 clone.

Solution-to-Ford-VCM2-freezing-up-when-opting-parameters

I’ve had similar before but was on my faulty vcm i think. Freezing is usually because of something which can’t communicate quick enough and ends up timing out.

You could reset the vcm via the red reset button, it’ll force ids to reload the firmware to the vcm which will be whatever firmware you have in the ids that is loaded, v101 I think you said.

You do have the vcm2 clone yes.

Remove the rubber end boot to reveal the button then have that pressed and held then plug usb lead into laptop and wait for beep then let go of the button, ids should prompt you to load the firmware so agree.

Next if the problem persists you need to look at reloading the laptop.

It is possible that the vcm is going though does it show the red padlock and red vcm icon on the task bar or does the lock disappear? Does the vcm show computer light flashing? Do you hear bing bong like it is missing connection?

Can you do a fresh install of w7 and v86 with license? That is the best ids for euro 4 transits if that is what you are working on?

Right it’s not as simple as running native v86 then which was going to be my suggestion.

I have v96 running and it works on my 65 custom.

I don’t want to write your vcm off but the only things you can do is.
Change cables.
Reset vcm.
Change software on laptop.
Change laptop completely.
There maybe vcm diagnostics available in ids but as it is a clone vcm i wouldn’t trust it.

Piwis Tester 2 Work For Porsche Cayenne 2014 Kessy Module Matched

How Does Porsche Piwis 2 Matching Porsche Cayenne 2014 Kessy Module

Piwis Tester 2 is Piwis Scan Tool for Porsche Scanner, Piwis Tester 2 with latest V18.150.500 software work for Porsche. Piwis 2 Porsche Scanner work for Porsche old and new car model before 2017. Below obd2tool.com share how does Piwis tester 2 work for Porsche Cayenne 2014 Kessy Module matching.

Piwis 2 with V18.150.500 Piwis 2 Software

How does obd2tool.com offer IMMO code calculate for Kessy Module Matched?

1. Firstly, contact us sales@obd2tool.com to pay for Kessy module IMMO code calculate service,

Then pls send obd2tool.com sales order number with Porsche car nameplate to show the Car model, year & VIN numbers.

2. Secondly, connect the Piwis tester 2 interface & Porsche diagnostic laptop to the car, as well as insert power adapter to the car

3. Then, send us Teamviewer id and password of Piwis Tester 2 laptop, and waiting beside the car

4. Need your help to brakes on, headlight on, emergency flashing, turn on & off width lamp to keep the car activate all the time when technician start offline matched Kessy Code.

(Once the Car is sleep during technician do the Kessy module matching, we have to restart processing.)

5. obd2tool.com technician will help you matched the kessy module.

Obd2tool.com Kindly Note:

1. Kessy had better brand new order via VIN number from the dealer

2. If we need matching the Second-hand Kessy Module via Piwis tester 2, pls offer VIN number to calculated the IMMO code firstly.

Customer need purchase the Piwis 2 Porsche Diagnostic Software V18.150.500 Porsche Piwis II Porsche Scanners or Piwis 2 online programming after change new module just contact us freely.

Lonsdor K518ise key programmer add non-smart keys to Renault Clio 3

Confirmed! Lonsdor K518ISE Key Programmer is able to add non-smart keys to Renault Clio 3

In Lonsdor K518ise:

Immobilizer – Renault – select from vehicle – Clio – Clio 3

lonsdor-k518ise-renault-clio-1

Add non-smart keys
lonsdor-k518ise-renault-clio-2 lonsdor-k518ise-renault-clio-3

Downloading application…

lonsdor-k518ise-renault-clio-4
Lonsdor starts programming new keys…

Turn off the ignition switch and remove the key

lonsdor-k518ise-renault-clio-5

Current key: 2

lonsdor-k518ise-renault-clio-6
lonsdor-k518ise-renault-clio-7

Insert the key and switch ignition on

lonsdor-k518ise-renault-clio-8

Switch ignition off, remove the key

lonsdor-k518ise-renault-clio-9

Insert the key and switch ignition on

lonsdor-k518ise-renault-clio-10

Switch ignition off, remove the key

lonsdor-k518ise-renault-clio-11

Continue to program the next key

lonsdor-k518ise-renault-clio-12 lonsdor-k518ise-renault-clio-13

Key learn complete

lonsdor-k518ise-renault-clio-14

Test both keys

lonsdor-k518ise-renault-clio-15
lonsdor-k518ise-renault-clio-16

Done!

Lonsdor K518ISE Software Optimization

Lonsdor K518ISE Software Optimization:

1. VW IMMO2 &IMMO3【 Read PIN】
2. VW IMMO4: Enable more dashboards to auto-identify immo type
3. Skoda IMMO2 & IMMO3 [Read PIN]
4. Skoda IMMO4: Enable more dashboards to auto identify mmo type
5. BMW CAS: CASL is available: CAS2/CAS3 【 Delete key】.
6. BMW FEM/BDC: Suport swfl_00002419_071_010_040,swfl_00002419_080_010_010
software version
7. Toyota: Optimize menu [Select from vehicle]
8. Dodge/Chrysler/JEEP & Honda
9.Hyundai/Kia: Optimize【Read46 chip PIN】and【 Read PIN code (46 smart
card)】, support obtaining PIN via LKE decoding
10.BYD: [Generate working key], support generating SK via LKE to obtain PIN
1. Porsche: Optimize key programming procedure.For Bote(2005-2011)/Cay-
man(2005-2011)/997(2005-2010)/911(2005-2010),support bypass programming with LKE.

Lonsdor K518ise Latest Update SCION

Program Maserati Levante 2016 Smart Key with Lonsdor K518ISE

Another test report: Lonsdor K518ISE can do Maserati Levante 2017/2016 lost key.

How to add a Levante 2016 smart key with Lonsdor?

Step 1: Backup Immo Data

Turn ignition to ON position

In K518ISE, select Immobilizer->Maserati->Smart key(2016-)->Smart key->Backup Data (via OBD)

lonsdor-k518ise-maserati-levante-1

lonsdor-k518ise-maserati-levante-2

lonsdor-k518ise-maserati-levante-3

This function will read and save immo data

lonsdor-k518ise-maserati-levante-4

Turn off ignition and turn on the emergency indicator

lonsdor-k518ise-maserati-levante-5

Getting data about 2 minutes

lonsdor-k518ise-maserati-levante-6

Save  EEPROM data.
lonsdor-k518ise-maserati-levante-7

lonsdor-k518ise-maserati-levante-8

Step 2: Add a Smart Key with Lonsdor K518

lonsdor-k518ise-maserati-levante-9

Select Add Smart Key

lonsdor-k518ise-maserati-levante-10

Select EEPROM data just saved

lonsdor-k518ise-maserati-levante-11

Confirm VIN

lonsdor-k518ise-maserati-levante-12

Turn off ignition and turn on emergency indicator. Press OK to continue
lonsdor-k518ise-maserati-levante-13

Keep only one smart key to be programmed inside the car, take other smart keys outside the car

lonsdor-k518ise-maserati-levante-14

Press Lock or Unlock button of the smart key

lonsdor-k518ise-maserati-levante-15

Put the smart key close to the Start button within 30 seconds and press Unlock button once

lonsdor-k518ise-maserati-levante-16

Programming complete

lonsdor-k518ise-maserati-levante-17

Test the new smart key. The key works.

Done.

Buy Volvo 88890300 Vocom or VCADS Pro 2.40

Volvo Vocom 88890300 can work with old and new Volvo heavy duty, supports j1708 and j1939, can perform programming etc, Vocom can diagnose Volvo Penta that Volvo VCADS Pro 2.40 can’t.

Volvo VCADS Pro 2.40 is for diagnosing the old Volvo trucks, supports j1708 protocol.

And more below:

1. Workable vehicle models:

Vocom:  Volvo/Renault/UD/Mack Truck

VCADS: Volvo truck

2. Operation system:

Vocom: requires windows XP/ window7 32bit

VCADS requires windows XP

Info:

How to Install Volvo PTT v2.03 Software with Vocom interface

3. Laptop required:

Vocom has no limitation on laptop

VCADS can only be supported by Dell 630

Reliable Source of:

Volvo 88890300 Vocom Interface

Volvo-88890300-Vocom-Interface

How To Set the Piwis Tester II Scanner Self-Test Mode

How to Turn On & Off Piwis 2 Scanner Self-Test Mode

On the Piwis Tester 2 V18.150.500 Piwis 2 software, the Self-test mode default setting off, How to turn Piwis 2 for Porsche diagnostic tool self-test mode? Below we share the Piwis Tester 2 Self-Test Mode Turn On & Off Guide as follow.

 
Piwis Tester 2 For Porsche Diagnostic & Programming Tool

Piwis 2 Porsche Piwis Tester II Hardware
3 Steps To Set Up Piwis Tester 2 Self-Test Mode Guide?

Clients can set the Piwis 2 Porsche scanner self-test mode by means of this parameter.

When you have saved the corresponding setting, the diagnostic application will then be started with this configuration from this point on.

1.Start the Piwis II control application and select the category “Mode” in the menu bar:

2. Click next to the entry Self-test in the field Value (A) and select the corresponding entry in the drop-down menu by clicking on the corresponding option once (B).

Piwis 2 Porsche Piwis tester 2 Porsche diagnostic tool

The following options are available:
? Off
When the application starts, Piwis 2 self-test will not perform
? On
The self-test is performed when the application is started

3. Save the setting by pressing the button.

Customer need purchase the Piwis 2 Porsche Diagnostic Software V18.150.500 Porsche Piwis II Porsche Scanners just contact us freely.

And welcome client writes down Piwis tester 2 Sanner reviews under our product, just contact us freely.

Solution to Ford VCM2 freezing up when opting parameters

Question: I am able to use Ford VCM 2 to read and clear any dtcs etc so it is recognizing vehicle, just freezing up when opting parameters ? I am working on Ford 2014 custom.

I have vcm2 clone.

Solution-to-Ford-VCM2-freezing-up-1
Solution-to-Ford-VCM2-freezing-up-2

I’ve had similar before but was on my faulty vcm i think. Freezing is usually because of something which can’t communicate quick enough and ends up timing out.

You could reset the vcm via the red reset button, it’ll force ids to reload the firmware to the vcm which will be whatever firmware you have in the ids that is loaded, v101 I think you said.

You do have the vcm2 clone yes.

Remove the rubber end boot to reveal the button then have that pressed and held then plug usb lead into laptop and wait for beep then let go of the button, ids should prompt you to load the firmware so agree.

Next if the problem persists you need to look at reloading the laptop.

It is possible that the vcm is going though does it show the red padlock and red vcm icon on the task bar or does the lock disappear? Does the vcm show computer light flashing? Do you hear bing bong like it is missing connection?

Can you do a fresh install of w7 and v86 with license? That is the best ids for euro 4 transits if that is what you are working on?

Right it’s not as simple as running native v86 then which was going to be my suggestion.

I have v96 running and it works on my 65 custom.

I don’t want to write your vcm off but the only things you can do is.
Change cables.
Reset vcm.
Change software on laptop.
Change laptop completely.
There maybe vcm diagnostics available in ids but as it is a clone vcm i wouldn’t trust it.

Comparación para 2019 Nueva Lonsdor K518S y K518ISE

Comparación para 2019 Nueva Lonsdor K518S y Lonsdor K518ISE:

Igual: Capacidades de Immo y cobertura de vehículos.

1. Programación de las llaves de inmovilización.
2. Ajuste del odómetro
3. Adaptador Volkswagen incorporado 4 ° y 5 °
4. Chip incorporado y módulo de detección remota.
5. Programación de llaves BMW FEM gratis

Lista de cobertura de automóviles para la inmovilización: (http://en.lonsdor.com/html/function)

Europa: Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG, Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart, Borgward
America: Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury
Asia: Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki, Toyota, Shigaoka Queen
China: Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Básicamente todos los modelos de automóviles chinos están incluidos)

Diferencia: Actualizar suscripciones.

Car Key Programmer Tool Lonsdor K518S Oferta 3 suscripciones opcionales.
1. Versión básica con actualización de por vida
2. Paquete completo con actualización gratuita por 6 meses, + 800USD por un a?o de suscripción
3. Paquete completo con actualización gratuita de por vida de suscripción. Este paquete no incluye hardware y paquete básico.

lonsdor-k518s-key-programmer-basic-version