Autel G BOX Benz & BMW Adapter Supports Benz All Keys Lost for Autel IM508 IM608

Autel G BOX is a new adapter to works for Auetl MaxiIM IM608 and IM508 with XP400 adapter (also works with Aurodiag IM600 and IM100).It is designed for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.

autel G BOX

The G-box features:

1.Mercedes Benz All Keys Lost, Faster Password Calculation

2.Supports IM608 or IM508 with XP400

3.Used for Faster Mercedes ECU data and EIS password calculation

4.Mercedes DAS3 can EIS/EZS all keys lost

5.Reduces time reading W204 ECU data & W207 EIS by over 85%

6.No need to remove and reinsert the key for W221 & W164 after 2009 models

7.BMW DME/DDE ISN reading and writing in boot mode

8.Compatible with Auro IM600 & Auro IM100 with XP400


When will you need Autel G-box?

It’s required when you do all keys lost for Mercedes or BMW.



Mercedes all keys lost – faster password calculation

-8x times faster password calculation for EIS W172, W204, W207

-4x times faster password calculation for EIS W209, W211, etc.


Mercedes all keys lost – no more repeated insertions and removables of ir simulator

W164/-208, W251/-2008, W164/2009-, W169, W251/2009, W216, W221 (partial), W202 (K)/ W208 (K)/ W210 (K), W203 (K)/ W463 (K)


Mercedes all keys lost – can be programmed on the vehicle without removing the EIS

Except for EIS W164/-2008, W251/-2008, W221, W202 (K)/ W208(K)/ W210 (K), and W203 (K)/ W463 (K), all other eis can be programmed on the vehicle directly


Mercedes all keys lost, BMW DME/DDE ISN reading and writing in boot mode

23 categories of Bosch engine, including MEVD/EDC17

6 categories of Siemens/Continental engine, including MSD/MSV engine


How to use Autel G box

You should know all the details (incl. ports and cables) before you use the G-box




There are two methods to use the G-box, OBDII or on table

Method 1: OBDII operation when Mercedes lost all keys

The method is use for Mercedes W204, W207, W164, W216 EISs after year 2009


Steps to connect to G-box:

1.Connect the G-box to the car thru OBD port

2.Remove the fuse of EIS on the vehicle

connect the relay ports to the fuse using the supplied fuse cable

3.When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable

connect the G-box to the Autel diagnostic tablet like MaxiIM IM608


Method 2: operation on table when Mercedes lost all keys

The method is used for all Mercedes EIS that are already covered by Autel tablet


How to Reset VXDIAG Benz C6 VCX DoIP Firmware

You need to perform a VXDIAG Benz C6 DoIP VCX firmware reset with these scenarios:

1.Failed to update firmware, need to reset VCX.
(Check video: How to update VXDIAG Benz firmware)

2.Device connect well with vehicle and laptop, indicators turn on, VX Manager cannot find the device.

How to reset VXDIAG Benz C6 VCX firmware?


Press Reset button on VCX unit


Connect VCX-DoIP with vehicle via USB to power on



Release the reset button after connecting to computer


After reading the device IP, click on DOIP-NET


Browse to U-Boot Update for VCXNet v1.1.0


Select Firmware location to reset: C:\Program Files (x86)\VCX\VCXMan\Tools\VCXDoIP\release


Update in progress


The management tool will find the device IP. The firmware reset is completed.


Now open the VX Manager. It will detect the VXDIAG C6 Benz VCX-DoIP diagnostic interface.

Device is ready to use.

VXDIAG VCX Plus Ford IDS “Cannot Find Device” Error Solution


I inserted the VXDIAG full 2TB HDD into laptop and run Ford IDS software. It failed me and gave an error “Cannot find device, please connect correctly”. How to solve the problem?


OBD2TOOL Solution:

You did not connect the VXDIAG VCX with laptop.

1.If you use VXDIAG Multi tool with HDD, just insert HDD and connect VCX with laptop and run software.

2.If you use VXDIAG VCX NANO USB/WiFi for Ford/Mazda, first connect vcx nano with laptop, then run IDS software from patch (VERY IMPORTANT !!!)

VXDIAG Benz C6 Multi Tool Xentry Software Update to V2019.07

VXDIAG VCX PLUS Benz or VXDIAG Benz C6 DoIP newer version 2019.07 has been tested and verified working by engineer.

Software list:

DTS Monaco
DTS Venice

Firmware: upgradeable

Multi-language: Chinese/English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanian/Serbo-Croatian/Swedish/German/Finnish/Hungarian/Japanese/Dutch/Portuguese/Russian/Slovenian/Turkish

Compatible upgradeable devices:


vxdiag benz C6:

VXDIAG with full brand:

vxdiag multi tool for BMW & Benz:

Update method:

For new users, buy the HDD/SSD which comes with latest version software
For old users, send back HDD/SSD to run an upgrade. Update is Free. Freight is on your own account.

VXDIAG Benz Xentry software display:





Porsche Piwis II Hardware with V18.150.500 Software FAQ

As Porsche Piwis III released with the high price, Porsche Diagnostic Tool client prefer to choose Piwis II. Porsche Piwis 2 Hardware with V18.150.500 Piwis II Software FAQ share by as follow.

Piwis Tester II with CF30 Laptop


Q: we will buy your Piwis 2 System with developer Mode. You have the Piwis 2 hardware too?
A: Here you can check the Piwis 2 Hardware>

Q: perfect, a Question if i have an original Piwis 2 hardware works with your Piwis 2 Porsche Diagnostic Software?
A: If you have Original Piwis II hardware, you can use them together.
For the Piwis 2 Software HDD when you got it, just plug into laptop, and send us Teamviewer id and password for activated, then you can use it.

Q: OK, you sell Piwis 2 Software only HDD or VM Maschine tool
A: The Piwis 2 software only HDD for sell, native installed on XP system, you can check it here>>
Developer mode just choose option, kindly note: Developer mode only Germany language available, only normal mode support multi-language. Pls make sure you know that before order. Thanks.

Q:I will buy this one Porsche Piwis 2 from Do you sell updates for it in future? Over Teamviwer? Or must i buy a hdd?
A: The Piwis 2 with laptop installed full set only can update by HDD, you can shipped it back to us for update, we will update HDD & free shipped back to you within 1 year warranty.

Or buy a new hdd to update is ok. Kindly note: we do not offer after-sales for the product from other suppliers, need any help pls keep your order number from ask for help. Thanks.

John Deere Service Advisor 4.2 AG Agricultural Machinery

Service manual Heavy Duty Truck Scanner John Deere Service Advisor 4.2 includes a complete guide to repair, special operating manuals, technical and maintenance instructions, service information, detailed diagrams and circuits, special instructions on installation, repair manuals, technical specifications, designed to improve the service of agricultural machinery John Deere.

If you’re looking for the recent version of John Deere Service Advisor, or some other tools, please contact us.
Service manual John Deere Service Advisor V 4.2.005 describes specifications, step by step instructions for operation and troubleshooting information.
Program John Deere Service Advisor V 4.2.005 is designed to work on a personal computer with the operating system – Windows XP, Windows 7, Windows 8/ 8.1 and has a convenient interface. The software works under Windows 10 but wasn’t tested with EDL adapter and drivers.

This version of Service Advisor has built-in hotfix against error message:
“There was an error initializing the search Engine.
Unable to start the search engine.”

John Deere Service Advisor covers:

Hint: Click show all

Apollo Series
Boom Harvester
Combines and Headers
Compact Excavator
Compact Loader
Cotton Harvesting
Cutting and Mowing
Golf and Turf Products
GPS Receiver
Harvester Head
Hay and Forage
Hydraulic Power Pack
Information Management
LG Attachments
Machine and Implement Control
Mate. Hand Cut. and Shredders
Mobile Application
Motor Inverter
OEM Engines
Planetary Drive
Planting and Seeding
Riding Lawn Equipment
Snow Products
Skid Steer
Sugar Cane Harvesters
Tractor Attachments
Utility Vehicle Attachment
Utility Vehicles
Vertical Tillage
Worksite Pro Attachment

History DVD includes following models:

Hint: Click show all

Combines and Headers
Cotton Harvesting
Hay and Forage
JD Miscellaneous Equipment
LG Attachments
Mate. Hand Cut. and Shredders
Other Bulldozer
Planting and Seeding
Skid Steer
Tractor Attachments

Lonsdor K518ISE Read Peugeot 207 Pin Code and Program Remote Key

New test report: Lonsdor K518S can read pin code and program remote key for Peugeot 207.

Devices used:

Original key

Keydiy universal remote

Keydiy KD-X2 remote maker

Lonsdor K518ISE/K518S key programmer

Step 1: Generate  remote

lonsdor-k518-peugeot-207-key-2 lonsdor-k518-peugeot-207-key-3 lonsdor-k518-peugeot-207-key-4 lonsdor-k518-peugeot-207-key-5 lonsdor-k518-peugeot-207-key-2 lonsdor-k518-peugeot-207-key-3


In Keydiy app, select wired NB multi-function 433MHz universal remote for Peugeot 207


Write/generate remote success.

Step 2: Read Pin Code

Turn on ignition switch

In Lonsdor, select Immobilizer->Peugeot->Read Pin Code->Type 1

Turn off ignition. Do not insert key.

lonsdor-k518-peugeot-207-key-7   7

Turn on ignition

Turn off ignition

Turn on ignition again

Turn off ignition


Read pin code success

Step 3: Program key

Select Immobilizer->Peugeot->Select from vehicle->207->Immobilizer->Type 2->Program key


Turn on ignition switch

K518 will read vehicle information, VIN, software number etc

Enter 4-digit pin code to access


Turn ignition off and on with keydiy remote (1st key) within 15s


Program first key success

Turn ignition off, replace new key and turn on ignition



Follow same procedure to program 3rd key (original key)


Step 4: Program remote control

Manually program remote control

1.Turn off ignition and remove key

2.Insert a key and switch on ignition

3. Press any button of the remote key for 10s and then release within 20s

4.Switch off ignition and remove key

5. For more keys, repeat step 2-4

Test the remote control and start engine



Lonsdor K518ISE Program Chevrolet Malibu 07-11 Remote Key

How-to: generate remote and program remote control on Chevrolet Malibu 2007 to 2011 step-by-step.

Device used:

VVDI universal remote key 315Mhz

VVDI Key Tool/vvdi mini key tool

Lonsdor K518ISE

Step 1: Generate remote with VVDI Key Tool

Select Remote/Smart Program->Remote Key->America->Chevrolet->Malibu->BGTO4A 04-13 5BTN


generate-malibu-remote-2 generate-malibu-remote-3 generate-malibu-remote-4 generate-malibu-remote-5 generate-malibu-remote-6

Press Generate button
Writing data

Generate remote success

Step 2: Program remote control with Lonsdor K518

Select Immobilizer->Chevrolet->China->Malibu->2007-2011->Remote->Program Remote




Turn on ignition switch
Press on LOCK and UNLOCK button of the remote key together within 1m until the vehicle make a sound

Click OK to continue

Configuring system


Program remote control complete

Test remote control