What does the CANdi module do

CANdi adapter user manual for  GM Tech 2 clone scanner:

What’s the candi module?

What is the real purpose of the candi module?

What is the CANdi module used for?

What’s the physical interface and LED?

“NO CANDI Communication Established”

What’s the candi module?

An industry change in protocol from OBD II to Controller Area Network (CAN) is ongoing. In order to perform diagnostics on a vehicle that uses the CAN interface, you will need the Tech 2 and a CAN diagnostic interface module. The CANdi module connects between the Tech 2’s diagnostic link cable and the OBD adapter.

What-is-the-candi-module-1

What-is-the-candi-module-2

The Controller Area Network Diagnostic Interface (CANdi) is an in-cable module that works with the existing Tech 2 components including the VCI, cables and adapters. Installed, the CANdi module is fully backward compatible with current tester functionality. The module powers up in a way that makes it transparent to the user.

That is, unless the Tech 2 enables features specific to the CANdi module. This allows the existing Tech 2 software to be used with no changes, whether or not the CANdi module is installed.

What is the real purpose of the candi module?

The CANDI module reads the CAN Network on cars that have it. Corvettes 2005 and newer use the CAN Network. Still use a OBDII connector but the Candi module is needed to read the data on the CAN Network.

What is the CANdi module used for?

The primary function of the CANdi module is to add CAN capability to the Tech 2 scan tool.

The CANdi module:

– support simultaneous communications on three CAN buses

– provides high speed UART communications with Tech 2

What-is-the-candi-module-3

What’s the physical interface and LED?

CANdi adapter connects the Tech II by way of the existing Data Link Connector (DLC) Burndy Connector. The vehicle side connection remains unchanged using the existing adapter to interface between the Burndy connector and the SAE J1962 connector. When functioning properly, CANdi’s LED flashes. In the vent of a problem,the LED will be constantly illuminated.

What-is-the-candi-module-4

What-is-the-candi-module-5

How will you do with “NO CANDI Communication Established”?

How-to’s of CANDI module communication errors:

“CANdi module was not detected for Tech2”

Or

“NO CANDI Communication Established”

First, please make sure you plugged the candi adapter in to the car and the tech 2 before powering up

Then, disconnect the connector leaving the candi adapter going to the OBD port. Plug it back in and make sure its real snug, then plug it into the obd port. I need to do this every now and then with my clone one. Usually it works after. Suspect the pins arent making the best contact.

Tech support from professionals:
*   With the car ignition off, connect the GM Tech2 and CANdi module (which is now one long cable).
*   Power up the Tech
*    You’ll get 12V from the DLC (now it takes me a half hour to find the “DLC means” Data Link Connector “and is what we also call the OBD2 connector, so be prepared to be stumped by TLA’s (Three Letter Acronyms)
*   At the main menu press F3-tool options
*   At the tool options screen select F9, CANdi Diagnostics
*   There are two tests on the next screen, run them both. The CANDI should talk to your 2004+ car
*   Either turn the ignition key of the car, or start it (for a C6 there is not an “on”).
*    Press the EXIT button until the Tech 2 goes back to the main menu.
*   Select F0, Diagnostics.
*   Make sure you want to look at the module. You may be choosing body style; You may need the body code (sometimes the third character in the VIN) You may also be asked about certain options, like ZL6. They are on a tag in the glovebox.
*   After that you will be able to play with the Tech2 clone.

IMPORTANT: Sometimes, it’s just problem with candi, as when using on other cars without candi, it’s just perfect. So you should have a good candi such as . It’s just better, but still needs to connect a few times. So I you can buy another card 148. If not totally solved, rewrite the card to 143 and 136. Both work fine. That is, 148 is no good for candi. Could be corrupted software, or the card problem. These cards coming together with Tech 2 are not good sometimes. You’d better but china knock-offs from a man of his word to trust in. Here, Obd2tool.com is one of them you can go with.

Why should buy Xentry connect

Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.can work on windows xp, win7/8/10 system.

MB-SD-C5-SD-Connect-Compact-5-Star-Diagnose-for-Cars-&-Trucks-1

Xentry Connect C5 Benz SD Connect DoIP Wifi MB Star C5 Xentry Tab Kit Diagnosis Multiplexer
Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
The tool we sell do not include the xentry tab, you can equip one yourself or choose other laptop, it is just as a display, no special requirement.
Xentry Connect (VCI+) Technical Parameters:
1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ
The way to connect: support wireless connection via 1000M workshop switches, also support wired connection.

What the difference on diagnostic systems based on Xentry Connect from other equipment used to diagnose Mercedes cars?

What are its distinguishing features?

Hardware, despite the similarity of many solutions with multiplexers SD Connect –
but the different All diagnostic software is loaded into the Xentry Connect multiplexer itself.
The management software can be installed on any computer with Windows 7 – 32-bit or Windows 8 – 32-bit and serves only for communication with the multiplexer

The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy Xentry connect

After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.

Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SD Connect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1,
somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.

Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.

So , we suggest buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .
After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Package List:
1pc x C5 Multiplexer (new C5 case)
1pc x OBDII 16PIN Cable
1pc x Lan Cable

Lonsdor K518ISE Read Hyundai Elantra 2017 PIN Code Success

One of our prominent outstanding customers just managed to read pin code successfully from a Hyundai Elantra year 2017 with Lonsdor K518 key programmer.

Lonsdor K518SE it’s performance is good and getting better with regular updates, most importantly there’s no hidden costs
(NO TOKENS- FREE UPDATES- NO FEES)
Pulls Chrysler pins, by-passes ford 10min, also great on the New ford systems. dose Toyota Lexus 2012 Up all lost via Emulators which are optional, Processor speed is fast.
+ much more to come

Photo attached:

k518-Hyundai-Elantra-2017-pin-1 k518-Hyundai-Elantra-2017-pin-2 k518-Hyundai-Elantra-2017-pin-3 k518-Hyundai-Elantra-2017-pin-4

k518-Hyundai-Elantra-2017-pin-5 k518-Hyundai-Elantra-2017-pin-6 k518-Hyundai-Elantra-2017-pin-7 k518-Hyundai-Elantra-2017-pin-8 k518-Hyundai-Elantra-2017-pin-9

Lonsdor K518ISE Program Honda Accord 2012 Transponder Key

How to add Honda Accord 2012 transponder key using K518ISE key programmer.

lonsdor-k518-2012-honda-accord-2

Select Immobilization->Honda->Select from type->Immobilizer->16 PIN->Check IMMO type

lonsdor-k518-2012-honda-accord-1

lonsdor-k518-2012-honda-accord-3

lonsdor-k518-2012-honda-accord-4
lonsdor-k518-2012-honda-accord-5
lonsdor-k518-2012-honda-accord-6

lonsdor-k518-2012-honda-accord-7

Lonsdor K518 detects it is Type 1

lonsdor-k518-2012-honda-accord-8

Select Type 1->All keys lost

lonsdor-k518-2012-honda-accord-9

lonsdor-k518-2012-honda-accord-10

Turn on ignition switch

lonsdor-k518-2012-honda-accord-11

Enter number of keys need to be registered: 3

Turn ignition off within 15 sec

Turn ignition on again

Turn ignition off within 17 sec

Turn on ignition switch with a new key within 20 sec

lonsdor-k518-2012-honda-accord-12

Turn ignition off within 17 sec

Insert another new key and turn on ignition within 20 sec

Switch ignition off within 17 sec

Turn ignition ON within 20 sec without replacing key

Turn ignition off within 15 sec

Turn ignition ON

Check if the immobilizer indicator goes off, if yes, press OK to continue

Turn ignition off within 15 sec

Turn ignition ON

lonsdor-k518-2012-honda-accord-13

Key programming completed.

Key programmed : 3

Test all keys and start engine.

Done.

Difference of SKP900 and CK100 key programmer

I noticed that many locksmiths on Facebook and forums are discussing about SuperOBD SKP900 key programmer recently. SKP-900 is becoming a rising star in locksmith industry while V45.06 CK100 has always been the hottest selling car key programmer in the past months. Some locksmiths then asked me what is the difference between the two tools and which one should they pick if they want to get a car key programmer. Here I will briefly list 5 differences between the two tools.

Built by SuperOBD Company, a professional manufacture ofcar key programmers and PIN code readers, SKP900 has better quality than CK100.

Vehicle support:

As a cheap device, CK100 is great as it covers many car brands such as Alfa Remeo, Audi, Buick, Chevrolet, Dodge, Ford and Citroen, but it does not cover all of their models, especially the newer ones made in 2014. Although the latest CK100 V45.06 supports extra Ford, Honda and Toyota cars than V45.02, its vehicle list is a lot shorter than SKP900 which supports almost all the vehicles in the world. Besides, SKP900 manufacturer has got it back and is developing its car list.

Function:

SKP900 can read PIN code from many vehicles for programming while CK100 cannot. Therefore SKP900 is more user friendly than CK100.

Update:

SKP900 supports lifetime free update, no limitation on update times, while CK100 cannot be updated.

Price:

Although CK100 is not as powerful and professional as SKP900, it is much cheaper than SKP900. SKP900 costs $659 shipping from US Only 2 Days Delivery on OBD2TOOL, while CK100 costs $129.

Lonsdor K518ISE Generate Mitsubishi 46 Key Chip Success

Lonsdor K518S Key Programmer released chip identification and generation functions (including 4D Chip/46 Chip/48 Chip/T5 chip/7935 chip). Here’s the test report on reading and generating Mitsubishi 46 Key Chip.

Step 1: Identify key chip

Select Special Function->Chip auto-ID->Chip identification

lonsdor-k518ise-generate-chip-1

lonsdor-k518ise-generate-chip-2
Put chip to be identified into Lonsdor K518ise key slot

lonsdor-k518ise-generate-chip-3
Lonsdor read chip type: 46 PCF7936 (HITAG2) chip

lonsdor-k518ise-generate-chip-4

Step 2: Generate key chip

Select Special Function->Generate Key Chip->46 Chip->Mitsubishi

lonsdor-k518ise-generate-chip-5

lonsdor-k518ise-generate-chip-6
lonsdor-k518ise-generate-chip-7

Put 46 chip into K518ise key slot

lonsdor-k518ise-generate-chip-8

Generating…

lonsdor-k518ise-generate-chip-9

Succeed.

Go back and identify key chip

Lonsdor K518 generated Mitsubishi 46 chip success

lonsdor-k518ise-generate-chip-10

www.obd2tool.com

Lonsdor K518ISE Isuzu Vehicle List

Here comes the Isuzu immobilizer key programming list of Lonsdor K518ISE/K518S key programmer.

ISUZU\D-MAX\Key\Type 1 (46 chip)     Program key,Delete key,Clear fault code,Clear fault code,Reset IMMO,Reset ECU,Program immo ECU (TransTron),Program immo ECU (delphi),
ISUZU\MU-7\Immobilizer\46 chip     Program key,Delete key,Clear fault code,Clear fault code,Reset IMMO,Reset ECU,Program immo ECU (TransTron),Program immo ECU (delphi),
ISUZU\D-MAX\Key\Type 2     Passive access control programming and start system functions,Reset steering lock ECU,Reset engine ECU,Reset passive access control & start system control,Delete key,E-key registration,Program VIN,
ISUZU\MU-X\Smart key\Type 1     Passive access control programming and start system functions,Reset steering lock ECU,Reset engine ECU,Reset passive access control & start system control,Delete key,E-key registration,Program VIN,
ISUZU\D-Max\Smart key     Add smart key,Delete smart key,
ISUZU\MU-X\Smart key\Type 2     Add smart key,Delete smart key,
ISUZU\D-MAX\Remote     Program remote,Delete remote,
ISUZU\TF\IMMO 2008-2012     Add key,Delete key,Clear fault code,
ISUZU\D-Max\Immobilizer\Type 3(48 chip)     Program key,Delete key,Read key data,Clear fault code,

Lonsdor K518ISE review on Isuzu

Lonsdor K518 Program Isuzu D-Max Remote Key

Lonsdor K518ISE Opel Vauxhall Vehicle List

Here comes the Opel and Vauxhall immobilizer key programming list of Lonsdor K518ISE/K518S key programmer.

Opel IMMO Vehicle List
OPEL\Read PIN code     Switch ignition on,Read pin code type1,Read pin code type2(via BCM),Read pin code type4,Read pin code type5,Read pin code type6,Read pin code type7,Read pin code type3,
OPEL\IMMO\Select from type\Type 1\Smart key     All smart key lost,Add smart key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Insignia\2009-2016\Smart key     All smart key lost,Add smart key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from type\Type 1\Immobilizer     All key lost,Add key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Insignia\2009-2016\Immobilizer     All key lost,Add key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from type\Type 2     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Agila     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Astra\Astra-G     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Calibra     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Combo\1998-     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Corsa\Corsa-B     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Corsa\Corsa-C     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Meriva\Meriva     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Movano\1998-2001     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Omega-B\Immobilizer\Type 1(KWP)     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Sintra     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Tigra-B     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from vehicle\Vectra-B     Clear fault code,Program key,Delete key,ECU immobilization,Program engine ECU,Reset immo ECU,Reset engine ECU,Turn on burglar alarm system,Read PIN code,
OPEL\IMMO\Select from type\Type 3     Program key,Delete key,
OPEL\IMMO\Select from vehicle\Astra\Astra-H\Immobilizer     Program key,Delete key,Read PIN code,Read PIN code(type 6),
OPEL\IMMO\Select from type\Type 4     Read key count,Program key,
OPEL\IMMO\Select from vehicle\Agila B\-2009     Read key count,Program key,
OPEL\IMMO\Select from type\Type 5     Read key count,Program key,
OPEL\IMMO\Select from vehicle\Agila B\2009-     Read key count,Program key,
OPEL\Remote system\Astra-H     Delete remote,Program remote,
OPEL\Remote system\Zafira-B     Delete remote,Program remote,
OPEL\Remote system\Vectra-C/Signum     Delete remote,Program remote,
OPEL\Remote system\Corsa\Corsa-D     Delete remote,Program remote,
OPEL\IMMO\Select from vehicle\Astra\Astra-H\Smart key\Program key     Immobilizer,Delete key,Key count,
OPEL\IMMO\Select from vehicle\Astra\Astra-H\Smart key\All key lost     All key lost,
OPEL\IMMO\Select from vehicle\Astra\Astra\2007\Smart key     Learn smart key,Delete all smart keys,
OPEL\Remote system\Astra\07     Program remote,Delete remote,
OPEL\Remote system\Antara     Program remote,Delete remote,
OPEL\IMMO\Select from vehicle\Antara\2010-2013\Flip key     All key lost,
OPEL\IMMO\Select from vehicle\Omega-B\Immobilizer\Type 2(CAN)     All key lost,Add key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Omega-B\Smart key     Add smart key,All smart key lost,Read smart key count,
OPEL\IMMO\Select from type\Type 6     All key lost,
OPEL\IMMO\Select from vehicle\Astra\Astra-J\2010-2016\Smart key     All smart key lost,Add smart key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Astra\Astra-J\2010-2016\Immobilizer     All key lost,Add key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Zafira\Zafira-C\2012-2016\Smart key     All smart key lost,Add smart key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Zafira\Zafira-C\2012-2016\Immobilizer     All key lost,Add key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Meriva\Meriva-B\Immobilizer     Add key,Delete key,Read PIN code,
OPEL\IMMO\Select from vehicle\Corsa\Corsa-D\Immobilizer     Add key,Delete key,Read PIN code,
OPEL\IMMO\Select from vehicle\Mokka\2012-2018\Smart key     All smart key lost,Add smart key,Read key count,Clear fault code,Read PIN code,
OPEL\IMMO\Select from vehicle\Mokka\2012-2018\Immobilizer     All key lost,Add key,Read key count,Clear fault code,Read PIN code,
OPEL\Remote system\Meriva     Program remote,Delete remote,
OPEL\IMMO\Select from vehicle\Signum\2003-2007     Program key,Delete key,Read PIN code(ECU),Read PIN code(Info Display),
Opel\IMMO\Select from vehicle\Vivaro\2014-\System 1     Read PIN code,Program key,Recover backup data,
Opel\IMMO\Select from vehicle\Vivaro\2014-\System 2     Program key,
OPEL\IMMO\Select from vehicle\Zafira\Zafira-B     Program key,Delete key,Read PIN code(ECU),Read PIN code(Info Display),

Lonsdor K518ISE review on Opel:

Lonsdor K518 Read Pin and Program Key on Opel Astra H 2005

Lonsdor K518ISE Read Opel Insignia 2016 Pin Code and Add Key

Lonsdor K518ISE Read Pin Code and Add key on a Opel Corsa C 2006

Lonsdor K518ISE Read 2016 OPEL Astra J PIN and Add Key Success

Lonsdor K518ISE Read Opel Corsa-D 2008 Pin Code and Add PCF7941 Remote Key

Lonsdor K518ISE Program Opel Astra J 2015 Remote Key

Lonsdor K518ISE Program Opel Vivaro 2013 Key Success

Lonsdor K518ISE Read Pin Code Opel Zafira B 2007

How to change the Security Alarm setting on a 2014 Nissan Sentra by Launch X431 Throttle?

Change Security Alarm Setting for Nissan Sentra 2014:

Connect Launch X431 Throttle to Nissan Sentra OBD port,the enter menu to select “Nissan”.

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-1

Check Nissan diagnosis software version and function list,select “OK”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-2

Select “The Vehicle With 16PIN”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-3

Confirm VIN and select “OK”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-4

Select “Automatically Search”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-5

Confirm VIN,Model,Year and select “OK”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-6

Select “System Selection”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-7

Select “BCM(Body Control Module)”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-8

System information,select “OK”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-9

Select “Security Alarm SET”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-10

It will prompt you “Change Security Alarm Setting”,select “OK”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-11

The current setting can be changed “On” or “Off”

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-12

Once completed,select the back button

Launch-X431-Throttle-Change-Security-Alarm-Setting-for-Nissan-Sentra-2014-13

Done!