How to Program BMW F01 CAS4 2010 Remote Key with Lonsdor K518ISE Auto Key Programmer?

Lonsdor K518ISE

Vehicle Model: BMW F-series F01 year 2010

 

Remote type: PCF7953, 868MHz

 

Immo type: CAS4 1L16Y

 

Device to program: key renew tool, Lonsdor K518ise and VVDI Prog

1

 

Procedure:

Step 1: Renew key (if have new key go to Step 2)

Step 2: Read dump

Step 3: Add a new key

 

Step 1: Renew used key

by Tango or MK3 programmers

2

3

4

 

Step 2: Read CAS4 data

Remove CAS4 module

5

Follow vvdi prog wiring diagram to connect CAS and programmer

6

7

Read CAS4 1L16Y data and save dump.

8

 

Step 3: Program key with Lonsdor K518ISE

In K518ISE, select Immobilizer->BMW->Select from type->CAS4/CAS4+ ->Make ignition key

9

Copy and paste the CAS4 EEPROM data to Lonsdor “customfile” folder

10

Upload EEPROM dump

11

Select a key position to add key

12

Insert new key to be generated into K518 card slot

13

Follow K518ise instructions to generate ignition key

1.Take all other keys out of car except the new key

 

2.Close newly generated key to car induction coil

 

3.Press Start button and wait for 15 sec (remove key when dash turns on)

 

4.Check all function of the new key

14

Test the new key

Remote detect and can start engine.

15

Done.

Leave a Comment

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>