BMW carsoft V6.5 interface user guide for beginners

I bought BMW CarSoft v6.5 entire kit from China for less than 50USD including the shipping to Ireland. I am driving a BMW 1994 325i Coupe M50B25 Euro left hand drive.

 

Package including:

BMW 6.5 Interface Unit

BMW OBDI 20 Pin Cable

BMW OBDII 16 Pin Cable

RS-232 Serial (COM) cable

BMW CarSoft v6.5 software CD

bmw-carsoft--v6.5-package-2

BMW-carsoft-v6.5-interface

 

Computer:

Attach the carsoft v6.5 interface to my old Win XP PC with COM port.

 

NOTE:

If your computer does not have a serial port, a PCMCIA serial card must be used.

A USB to Serial adaptor is not recommended and not supported in Carsoft.

A PCMCIA adaptor card is not included in Carsoft.

Please refer to the installation instructions that come with your PCMCIA Card.

 

Serial Port RS-232 on the PC/Laptop:

bmw-carsoft--v6.5-package-6

PCA RS-232 card inside:

bmw-carsoft--v6.5-package-5

bmw-carsoft--v6.5-package-4

 

Well let’s get right to it.

 

Carsoft v6.5 software was not difficult to install if follow the extremely detail pdf attachment here:

http://www.obd2tool.com/goods-580-BMW+CARSOFT+65.html

 

Mount on software image and enter into main menu

Click Perform Diagnosis->Total Diagnose, you will see lots of available tests control modules at once

 

 

 

bmw-carsoft--v6.5-interface-1

 

 

Erase the fault codes in specific control modules

 

 

bmw-carsoft--v6.5-interface-2

 

 

Click Special Functions tab, you are able to perform some special functions, like Live Data, LCM Reading, Service interval reset etc.

 

 

bmw-carsoft--v6.5-interface-3

 

Live DME – Digital Petrol Engine Control Unit:

Viewing parameters: Engine speed (RPM), intake air temperature, air flow, power supply etc.

 

bmw-carsoft--v6.5-interface-4 bmw-carsoft--v6.5-interface-5 bmw-carsoft--v6.5-interface-6

 

Live DDE – Digital Diesel Engine Control Unit:

twice more sensors and readings than DME.

 

Live EGS – Automatic Gear Box Control Unit:

 

 

 

bmw-carsoft--v6.5-interface-7

Carsoft 6.5 erase DME code

DMEErase

 

No tool is perfect. Not all of those functions are available for all BMWs. Everything looks nice and promising, but… The newer BMW you have the more satisfaction you get from diagnose. I have OBDI and I couldn’t enjoy LIVE DATA and some other modules. If your model is 1994 later, it will be fine.

 

Tips for OBD2 car, if you get every modules not responding or DDE responding and all the other modules not responding.
Here is the solution. With the soldering iron, bridge the pin 7 and 8 (the 2 K-line) together

 

 

 

BMW-20pin-connector-pinout

 

 

This will fix this problem on most E39 and E46
Another tip if you get a similar problem using a 20-pin on a 4-cylinder BMW try bridging the pin 17 and 20
BTW, if you have broken your CD like me, never mind, I got the free carsoft software driver

GM Tech2 Parts

GM Tech2 Parts information,with the following gm tech2 parts,your GM Tech 2 will be more powerful.

32 MB Card For GM Tech2

32MB Card,works with GM TECH2, includes a 32MB PC Card loaded with the latest released GM Software.We are available with six kinds of software including SAAB, OPEL, GM, ISUZU, Suzuki and Holden.

32 MB Card For GM Tech2

OBD2 16PIN Connector for GM TECH2

OBD2 16PIN connector for GM TECH2, it is only a obd2 connector, can not use alone. It is for those customer who has gm tech2 but want have one more connector.

OBD2 16PIN Connector for GM TECH2 Diagnostic Tool

TIS2000 CD and USB Key for GM TECH2

This is TIS2000 software for GM TECH2, especially for GM car model.With TIS2000 CD and USB KEY,GM Tech2 can be used for programming.TIS2000 support cars until 2007 year.

TIS2000 CD and USB Key for GM TECH2 GM Car Model

Main Test Cable for GM TECH2

Used together with GM TECH2, can not works alone. It used to connect GM TECH2 with car for diagnose.

Main Test Cable for GM TECH2

GM Tech2 VCI Module

If your GM Tech VCI is bad, you can buy a new GM Tech2 VCI module.

GM Tech2 VCI Module

CANDI Interface for GM TECH2

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnosis on a vehicle that uses the CAN interface, you will need the Tech 2 Flash and a CAN diagnostic interface module.

The CANDI module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the CANDI module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.Includes the CAN diagnostic interface module and instruction sheet.

CANDI Interface for GM TECH2

scanner vcs

Scanner VCS Vehicle communication Scanner

Jual Scanner VCS Vehicle communication Scanner

Scanner VCS ini merupakan Cloning AutoBoss berbasiskan komuniasi usb dan jangkuan pemakaian diagnosis untuk mobil eropa dan asia,
disamping itu fitur yang paling handal yaitu kemudahan instalasinya dan kemudahan operasionalnya cocok sekali dipakai oleh teknisi yang profesional maupun pemula
Tampilan scanner ini sangat mudah difahami serta dengan gambar yang besar menjadikan scanner ini banyak sekali peminatnya

 

VCS juga menampilakan  informasi spesifik – kode produsen tertentu, kode pabrik, dan kode kesalahan generik pada sirkuit listrik tertentu.
Quick Test & Cepat Delete (pilih software)
Fitur Quick Test memungkinkan Anda dengan cepat memindai semua sistem di dalam kendaraan,
Mengidentifikasi pengendali dengan kesalahan dan menyediakan akses langsung ke sistem-sistem tanpa harus menavigasi melalui beberapa menu.
Tingkat respon kecepatan tinggi 8-10 frame per detik w / real-time pemecahan masalah hingga 4 grafik. Mendiagnosa sinyal untuk kondisi kaya atau ramping dengan pengambilan data hidup dan tampilan modul dalam format digital dan analog.

fungsi scanner ini sebagai berikut :

Baca DTC
Clear Diagnostics Kode Kesalahan DTC
Mendukung diagnosis dan membaca modul ECU
Diagnostik yang tepat dari semua ECM.
Diagnosis Power train,
Diagnosis Chassis dan body sistem 
Satu klik “Quick Test” tombol untuk memindai semua ECU
Menampilkan data List
Menampilkan Osiloscop bentuk  gelombang
Dukung Aktif Test
Program Ulang, ulang dan adaptasi,
Kalibrasi dan fungsi sistem Sensor
Diagnostik elektronik ECU.
Hyundai dan VW / Audi immobilizer fungsi khusus
Inisialisasi ECU dan coding
Menguji Komponen & Sistem actuations
Inisial Fungsi kecepatan idle

demo VCS

Fungsi Khusus:  Layanan Mereset & Inisialisasi:

Ketika komponen (misalnya injector, switch, sensor aliran massa udara, sensor suhu pendingin, dll) akan diganti dalam sebuah modul, kendaraan akan berjalan sangat kasar. Inisialisasi segera kembali menyesuaikan-semua nilai, sehingga komponen akan diakui oleh sistem kendaraan. (Misalnya Untuk mereset indikator pelayanan untuk kendaraan seperti “minyak layanan”, “layanan pengingat light”, “sensor sudut kemudi *”, dll)

Penyesuaian atau Adaptasi:
Kendaraan Komunikasi Scanner VCS mampu menyesuaikan parameter kinerja. (Misalnya RPM menganggur, penyesuaian kecepatan idle, timing pengapian, kendaraan w / immobilizer, sinkronisasi mengatur bahan bakar, belajar kembali throttle tubuh, DME Alignment, dll) Fungsi lain: Self-belajar Fungsi Buat sistem database pribadi untuk merekam kondisi ideal dari nilai yang sebenarnya dalam sistem kendaraan.

Rekam 160 Frames Live data 
Rekam data real-time streaming hingga 160 frame selama siklus drive. Diagnosis lebih rumit dari masalah intermiten akan memerlukan penggunaan fungsi ini untuk mengevaluasi aliran data selama perjalanan siklus dikendalikan didukung model mobil:

Menguji Komponen & Sistem actuator
Lakukan tes verifikasi untuk memvalidasi fungsionalitas dari rangkaian listrik tertentu. Fungsi ini akan memotong tenaga kerja memakan waktu untuk memeriksa pengerjaan komponen elektronik seperti switch, sensor, relay, & aktuator. Gunakan VCS untuk menjalankan modul kontrol dan melihat apa yang harus diganti tanpa menghapus panel dan pengujian tanpa penggunaan multimeter. (Misalnya silinder uji keseimbangan kekuasaan, sistem EVAP kebocoran, EGR valve, solenoid, power window, wiper aktivasi winshield, dll)

Asia
untuk Acura. untuk DAEWOO. untuk DAIHATSU. untuk HON DA. untuk HYUNDAI. untuk INFINITI. untuk ISUZU. KIA. untuk LEXUS. untuk MAZDA. untuk MITSUBISHI. untuk NISSAN. untuk Perodua. untuk PROTON. untuk SSANGYONG. untuk SUBARU. untuk SUZUKI. untuk TOYOTA

Australia
untuk AUSFORD. untuk HOLDEN

China
BYD. Chana. CHANGHE. CHERY. FDQC. untuk FUTIAN. untuk Geely. GWM. untuk HBSH. untuk Huachen. untuk LIFAN.WULING

Eropa
untuk ALFA. untuk AUDI. untuk ben z. untuk BM W. untuk CITROEN. untuk EURFORD. FIAT. Untuk JAGUAR. untuk LANCIA. untuk LANFROVER. untuk Opel. untuk PEUGEOT.untuk PORSCHE. untuk RENAULT. untuk SAAB. untuk SEAT. untuk SKODA. untuk SMART. untuk VOLVO. untuk VW Bahasa tersedia 1, Bahasa Inggris 2, Spanyol, 3, Cina (Tradisional) 4, Cina (disederhanakan) 5, Rusia

Specification:
Power Supply: 8-12VDC, 110-250VAC, 50HzConnection: Wireless atau USB
Sistem PC Minimum Requirement (tidak termasuk):
Windows XP
CPU 300MHz
memori 256MB RAM
1GB Hard Disk Memory
CD Drive
Bekerja Suhu: 10 – 176oF (-10 – 80oC
Kelembaban : <90%
Dimensi: 20 “X 14″ X 6 ”
Berat: £ 17,6 Highlights

1pc x VCS unit utama
1pc x OBD2 kabel
1pc x kabel USB
1pc x CD

choose Newest highest Quality GM MDI

Yesterday, one of my friend ask me :”Why i should choose newest highest quality GM MDI but not?GM MDI Diagnostic tool?” I believe you will also have this question.

Yes, why? why we choose it? Only because it is the newest?Let’s see together

Firstly, the?GM MDI Scan Tool

gm-mdi-diagnostic-tool-1

we can see it’s function and feature:

GM MDI is a new GM Diagnostic tool.it is not only work for the new gm car,but also for the old kind of car.it can test GM car from 1990—2012 year gm car. We can supply tech win and gds2 software for you.

really, it’s a good item , doesn’t it?

 

 

Let’s see the Newest highest Quality GM MDI??:highest-quality-gm-mdi-multiple-diagnostic-interface-01

It Made by Original Chip, it has all the funcion of GM MDI,?additional?it add 11 new more?functions:

1. With opel Global tis global diagnostic system
2. Support offline lease function
3. Support Opel offline programming function
4. With GDS2 diagnostic system
5. Tech2win diagnostic software support adding latest software

6. support programming online
7. support cable communication
8. support wireless communication
9. support original factory latest software
10. With European Chevetl Global tis, Supports European Chevetl offline programming
11. All Chip are new and original

Maybe you will ask: “May i use the original software on this gm mdi hardware?”

The answer off course is Yes ! You can use it. This GM MDI interface is made by original chip. Almost has the same function as the original one. You can use the original software with this hardware.

Someone will ask:”GM MDI supports online programming?”

Pls do not worry about it.?It has online programming. But for this function, you need to open and buy the online programming software from the original factory. Here is the software link: http://www.gmtechinfo.com/. You can directly buy the software and use it.

In a word, we can see the newest highest GM MDI contain more functions and made by original chip. ?With best quality and good price. Choose this, a right decision!

How to use WIFI BMW ICOM A2+B+C Software

Best ICOM A2+B+C for BMW with latest 2015.3 software,New adds WIFI function. With second generation diagnose and programming system,More convenient to use,But in the course you maybe still encounter some problems.

What should you pay attention when use USB WIFI for WIFI BMW ICOM:
1) Insert USB WIFI to your PC USB port first

2) Turn off the computer WIFI and other added WIFI. Your PC only can use our USB WIFI. Wired Ethernet port of your PC cannot connect internet and LAN cable for ICOM.
3) Make sure all above you have done, then start your PC.
4) After your PC is started. then make sure internet are all turned off or do not connect any LAN cable
2
Attention: this DWA-131 is our USB WIFI. You CANNOT turn off it. It is normal to show X.

5) Start the ICOM software, tick “wifi for ICOM”
3
6) After done. Now connect your ICOM firmware with your car. Wait for 20-60 second, then you will see the light on the ICOM main unit will flash slowly or do not flash. Then it means USB WIFI and BMW ICOM A2 WIFI are matched ok and have communication.
4
7) Now you can use diagnose and programming software. Click OK if you meet the following prompt.
5
8) This interface cannot be closed. Only can be minimized.
5
9) Software can recognize firmware normally.
6

http://www.obd2tool.com

NEXIQ 125032 USB Link + Software Diesel Truck Diagnose Interface FAQ Summary

Q1: Can I update your NEXIQ 125032 USB Link?
A1: No, do not update NEXIQ 125032 USB Link, otherwise it will not work.

Q2: NEXIQ 125032 USB Link + Software need password?
A2: No, it does need, for more details, please check the user manual in the column “technical support” or under “Related Download Files”.

Q3: I followed the instructions step by step to install the drivers. I didn’t have internet connection and I never tried to update the USB-Link. The “POWER” light” got on and the “DATA” & “FAULT” lights go on and off, on and off. And the device manager show and hide the USB-link drive.
A3:  This is because you install the original new driver and the Nexiq is broken, you need to return back to us for repair. (Note: please do not install the original software with our hardware.)

Q4: Does NEXIQ work with Volvo Bus and Isuzu truck? NEXIQ has no communication with these two vehicles.
A4: Nexiq hardware is not compatible with Volvo Bus. And our Nexiq only work with North American Isuzu. Nexiq cannot work well with CAT either, especially the Asian Cat, Nexiq only support CAT with J1939 and J1708 protocol, but so far most CAT engine is CAT special protocol CDL and J1939 Protocol has not yet come into use.

Q5: I bought one NEXIQ 125032 USB-link, after the driver setup finish; I plug Nexiq into the computer and all the indicator lights flash, this is not should be like this, what it means? What should I do? Does Nexiq have any problem? (By the way, I followed the setup instruction in the video)
A5: Try to install successfully the software driver and thenconnect with the car to test the vehicles. Any more questions, please keep contact.

Q6: When the ECU starts, it shows an error message “Received Error Code: 275”
A6: The driver isn’t installed successfully, and the software can’t recognize the hardware.

Q7: When connect the Nexiq, The power light, data light and Fault light keep flash fast, what’s the matter?
A7: You try to update NEXIQ, right? You have to return back us for repair.

Q8:  Does Nexiq contain ISUZU IDSS software? IDSS software fail to loading and display CRC error: “the file C:\Program Files\IDSS\ images\2007icvch \processed\fullsize\fullb606.rra doesnt match the file in the setup’s.cab file.”
A8: Please check the setup instruction and step-by-step install the software, and at the same time make sure your computer system support Isuzu IDSS software

Q9: I am your old customer; I buy from you several NEXIQ. But this time, when I open this software: V-MAC III Service diagnostics V2.6.12, it display an error message “Unable to read value software\Mack Trucks, Inc\Common\Device ID”, then I choose “Preferences “and then “RP123A Device name”, but there is nothing in the drop-down box for me to choose Nexiq USB.
A9: Make sure the driver installs successfully and the Patch is installed. Please install the software on another computer, do not install on the computer that you previously used.

Q10: WAS Multi-Diag Truck Diagnostic Tool(item NO.SH49), Nexiq(item NO.SH27), DPA5 (item NO.SH47 and SH47-B)? What is their difference?
A10: both of the three truck scanners are powerful, good quality, best-selling,but there are some differences among them: 1) supported truck models: Nexiq(item NO.SH27)and DPA5 (item NO.SH47 ,SH47-B) mainly work with American trucks, WAS Multi-Diag Truck(item NO.SH49) mainly work with European trucks. 2) Function: their function is almost the same, mainly support diagnosis and basic programming for a part of trucks, for example: Nexiq support program for Cummins.

Learn more detailed information pls click

 

Some problem when you operate the MB Star C4

So many customer meet some problem when they operate MB Star C4.If you also have some problem .pls do not worry about that .you could tell us what is happened and send the picture which step could not work .Our engineer will solve that one by one for you .

 

Here Let us to show some problem we often meet then how to solve that as following :

 

Q1: The MB Star C4 could work with the window 7?

A1: Although the moveable hard disk version is compatible with WIN7, better Professional version. But we suggest you not use WIN7, 90% sdc4 software get broken because of the usage of WIN7.

 

Q2: When you operate the mb star c4 but that the Screen become blue after  insert SD C4 Dell D60 hard disk into the computer and open it.

A2: Pls note : you need make sure your Dell D630 computer is integrated video card and with 1GB memory, because the D630 of discrete video card is easy to have blue screen or shutdown and restart, restart and shutdown.

 

Q3:When you operate that .if appear the problem as following picture ?

A3: Pls do not worry about that .you need activate that .and then we will send the the Xentry deverloper file then you will activate that is ok .

Here i wont list more one by one here ,if you meet any problem when you operate the mb star c4 ,pls contact us on our website : www.obd2tool.com

2002 gmc sierra 1500 5.3 v8 p0507

post here’s a little about the truck. It has 180000 miles. The service engine light has not been on until now. Just 2 thousands miles ago I hopped a curb and hit a sign. I do not remember the incident in detail. Got the truck realigned and inspected and everything was good. Just last week I have to emergency drive to southern California from reno at 2am. Its about 8 hours I’m not a speed racer but I cruised controlled about 75 until I started to hit traffic at 8 in the morning. Anyways I hot socal. Stayed there for a a hour or so the drove to Vegas. Spent the night there and drove back to reno the following afternoon. 1150 miles in 48 hours. After I got home I noticed the trck is idling high or it will idle low then high. Low then high.and it will keep doing that until I put it in drive and go. Cold starts the truck shakes while starting and once started he idle problem starts So I bought a simple obd2  scanner and this is what I got. P0507. Not sure how to go about diagnosing this so help would be appreciated I do not want to take it to the shop because I don’t have a lot of money but.if.its my only choice I will. I also changed the spark plugs and cleaned the air.filter in vegas just recently and had a low coolant problem in vegas where the truck. Was running at 250f degrees until I pulled into a Walmart and topped off he reservoir
http://www.obd2tool.com

GM Tech2 GM Scanner -CANdi & TIS

Latest version GM Tech2 GM Scanner- Candi interface&TIS working for GM/SAAB/OPEL/ISUZU/HOLDEN or SUZUKI.

The GM Tech2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 to 2013 year! An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

GM tech2

When you order GM Tech2 in cnauotool website, we can provide you a card (tech2 32 MB PCMCIA memory Card) with any one of these following softwares:

  1. GM-2013 V32.007 software

2.OPEL-(english) 2013 V151.001software

  1. SAAB-2013 software
  2. SUZUKI -2013software
  3. ISUZU-2009 software
  4. Holden export software
  5. Australia Holden software

Notice: TIS together with this unit is Offline TIS,offline TIS is free,it including GM TIS and OPEL TIS can program GM and Opel cars only till 2008. we will offer clear instructions and the cracked file.

Experience with OBD365 NEXIQ 125032 USB Link

nexiq 125032 USB llink

I have had an NEXIQ 125032 USB Link(Xtruck USB Link 125032) which I purchased from OBD2TOOL for around three weeks now and thought I would share my opinion about the product and the supplier with you.

Price and Ordering: Ordered this NEXIQ 125032 trucks and heavy duty scan tool diagnostic tool from OBD2TOOL website for US$290.00, with payment made thru PayPal. Reasonable price and easy payment.

Delivery timeline: Ordered early this month, delivered the next day, and arrived at my door 10 days later. The package was send from China by DHL. The shipping was pleasant but it made me upset as I could not locate my order although the supplier sent an email when order received, processed and shipped.

Package and use: The package arrived in good condition and included all the items it should have. In the past three weeks, I have used it for 8 times to diagnose 3 Volvo, 1 Hino, 2 Isuzu, and 2 SCANIA. It worded especially fast to troubleshoot Hino and SCANIA engine problems.