How to update PIWIS Tester 2 For Porsche software to V15.600

Today we’d like to share with you how to update the Piwis tester2 for Porsche software to latest V15.6

PIWIS Tester II For Porsche diagnostic software has newly updated to V15.600. Here is the detail software upgrade instruction provided.

Software version: PIWIS V15.600

best-quality-piwis-tester-ii-for-porsche-9[1]

 

piwis-tester-update

Updating including device :

PIWIS Tester 2 For Porsche , Allscanner VCX Porsche piwis tester, Original YANHUA Porsche tester 2, VXDIAG MULTI Diagnostic Tool for Porsche and LandRover etc.

Operating system need:
Windows XP only (CF-30 laptop CPU: 9300 4GB RAM is recommended)

How to update Porsche PIWIS software to V15.600?

1. Please insert the upgrade DVD into DVD rom, then choose [Tools- DVD Upgrade] the software will install automatically.

2. Click [Yes] to confirm released DVD installation prompt;

piwis-tester-update-1

3. Click [OK] to confirm the setup.

piwis-tester-update-2

4. When you seen these screens, you need wait with patient, it might cost around 4-7 hours to finish the whole upgrade process.

piwis-tester-update-3

piwis-tester-update-4

piwis-tester-update-5

5. Open the software after computer reboot, check the Porsche Tester 2 V15.600 software information.

piwis-tester-update-6

piwis-tester-update-7

piwis-tester-update-8

That’s all for the steps, have you got it ?

Warmly welcome to www.obd2tool.com

FAQ about MultiDiag J2534 Pass Thru installation

multi-diag-access-j2534

1. Q: Can I install Multi-Diag Access J2534 Pass Thru truck diagnostic tool and another car dianostic tool in the same computer?

A: We suggest you not to put two auto diagnostic softwares in the same computer, because they may interrupt with each other.

2. Q: I came across this problem when installing my MultiDiag J2534 diagnostic tool. I have taken a picture of the problem. I have tried to install the software on a Windows XP, a Win 7, Win 7 starter and a WIN 7 prof PC, but the error window just came up no matter how. What could cause the problem? What should I do?

multidiag-j2534-pass-thru-installation

 

A: Please download the XP system we provided, copy the software into a CD and insert the CD to install the software according to our installation video.

3. Q: When I was intalling the J2534, I always received a error message, reading “UCE no response”. I have tried the tool on several cars, and always got the same message. What is the problem?

A: It is properly that the driver couldnot recognize the software. Please try the tool on 2000-2008 VW cars and see if the tool can work alright.

4. Q: Do I have to activate the Multi-diag J2534 software when using it to diagnose Vlovo vehicles?

A: Yes, it needs activation to work on Volvo cars.

Comparison Table among all Mangoose

Comparison Table among all Mangoose:

Item Number SP116 SP205 SP205-B SP216
Color Blue Blue Blue Orange
Support Vehicles Jaguar and
Land Rover 2005-2014
Land Rover and
Jaguar from year 2005 to 2014
Land Rover and
Jaguar from year 2005 to 2014
Jaguar from 2005-2014
Land Rover from 2005-2014
Toyota from 1996-2014
Volvo from 1996-2013
Language English, German, Russian,
French, Dutch, Portuguese,
Japanese, Spanish, Italian
and Simplified Chinese.
English(United States), French,
German, Italian, Japanese,
Portuguese, Russian, Spanish,
Dutch and Simplified Chinese
English(United States), French,
German, Italian, Japanese,
Portuguese, Russian, Spanish,
Dutch and Simplified Chinese
English(United States),
French(Standard),German,Italian,
Japanese, Korean, Portuguese,
Russian, Spanish,Dutch,
Chinese(Simplified)
Software Version JLR SDD V142 JLR SDD V142 JLR SDD V142 JLR: V142
Volvo: 2013D
Toyota: V9.30.002
Update Via CD Via CD Via CD Via CD
PC OS Requirement Win7 and Windows XP Win XP/Win 7/Win 8
( Not all WIN 7/WIN 8 system
can install JLR SDD V142)
Win 7 Windows XP

Customer Feedback:                                                                                                                SP205 has more security features, overvoltage reducers
so should work more stabel than SP116

E-Mail:  sales@obd2tool.com

MB SD C4 Locked ? How to Solve?

Here we’d like to share with you How to Solve MB SD C4 Locked Problem

MB SD C4 diagnostic multiplexer Some users who get serial number 101923 or 101044 may get the device locked problem by misuse.

mb-sd-connect-compact4-star-diagnois-new-a[1]

MB-Star-C4-locked-problem

There are 3 possible reasons caused this problem:

1) Update the MB SD C4 firmware.
2) Have not configure the LAN& Wireless connection setting
3) Had the built-in WIFI card replaced

Obd2tool.co.uk engineers after checking and found the Solution:

1) MB SD C4 can not be upgraded. Please do not try to update MB SD C4 firmware
2) Configure the LAN and wireless connection setting. Check step-by-step WIFI setting guide in our webpage technical support.
3) Do not replace the original WIFI card included in the package.

If fail to get the device back to work, please try press “i” and “v” together during boot to check PM PIC firmware version. Contact our customer service to unlock your Benz MB SD C4 multiplexer.

Hope it would help you.

Welcome to www.obd2tool.com

How to Instalaltion VXDIAG VCX NANO For Ford/Mazda IDS V95

VXDIAG VCX NANO for Ford and Mazda 2 in 1 diagnostic scanner comes with V95 IDS.  Customers asked us how to installation this software. Following us, today we’d like to tell you the intruction step by step

VXDIAG VCX NANO for Ford and Mazda Basic Information:

Software version: Ford IDS V95, Mazda IDS V95

Language:

English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil)

Operating system:

Win XP SP3 PC made 2000 year up

Computer has at least 4GB Memory

Install VXDIAG Ford & Mazda IDS V95 software on VMware:

1) Install VMware Player

Open CD Driver

Install VMware player

sp239-1

Click “Next”

Accept license agreement, click “Next”

Click “Next”

Uncheck the software updates notice, press “Next”

Uncheck and click “Next”

Click “Next”

Click “Continue”

Click “Finish” when VMware player is well installed

sp239-2

sp239-3

2) Configure VMware

Copy Ford IDS95 VM file to disk C://

Open VMware on deaktop

Select open a Virtual Machine

sp239-4

Select “Play virtual machine”

Run VMware

3) Connect VXDIAG scanner

Connect VXDIAG VCX NANO Ford/Mazda scanner interface with computer

Select “Connect” tab

sp239-5

If you want to perform programming functions, you need to connect the network.

Open “VCM II Manager” on the desktop to check the connection

sp239-6

 

sp239-7

4) Run Ford/Mazda IDS V95 software

Open “IDS” setup on desktop

Check communication in Wireless Device Manager interface

sp239-8

Select Information option to check software version and VXDIAG firmware information

Click car icon to establish communication to PCM

After well communication is built, the IDS will display vehicle information

sp239-9

sp239-10

Stat to run Self- Test and read codes

Select specific control module and view freeze frame, live data etc

sp239-11

sp239-12

Hope it would help you, If any questions, please contact us at Sales@obd2tool.com

How to disable TPMS with Porsche Piwis Cable

The following part displays the step-by-step guide of disabling TPMS with a Porsche Piwis cable on a 2008 Porsche Boxster S 987.

Tool needed:

1. Porsche Piwis cable (cheap $30- on aftermarket, like $22.99 in obd2tool)
2. Screw driver
3. 11mm socket
4. A laptop/computer running win xp home

NOTE: This Piwis cable fits most of Porsche Models from year 1990 to 2007. But this cable does not support newer Porsche models.

Step 1: Disconnect the TPMS control unit

1) Disconnect the TPMS control unit locate to the right of the brake booster. Open front trunk and dislodge the weather stripping that seals the front trunk. Remove the entire seal loop from the trunk. (See the picture below)
disable TPMS with Porsche Piwis Cable
2) Remove the plastic cover that protect your DVD/brake booster. Remove following 7 screws circled in red picture below with a screw driver. Then remove the light and plastic carpet hold marked red arrow.
disable TPMS with Porsche Piwis Cable

3) You can see the TPMS control unit white box marked red in picture below which located next to the brake booster. Use the 11mm socket to remove the plastic nut market red arrow.
disable TPMS with Porsche Piwis Cable
4)  The connector has a swing arm connection. You simply need to first press down on the small catch tab (red circle), then lift the pink swing arm (see insert).
Piwis cable4

Step 2: Recoding with Porsche Piwis cable

1) Turn the vehicle ignition switch to ON position
2) Turn on hazard signal
3) Plug the Porsche Piwis cable into the OBD port
4) Connect the cable with computer/laptop via USB port
5) Install and run software
6) Select “Instrument cluster”>> “Coding”>> “Tire Pressure Monitoring System (TPMS) Not Installed” and “Normal pressure display (TPM) Not Active” in the software Function list.
Don’t forget to back up files when you do some changes.
disable TPMS with Porsche Piwis Cable
7) Select “Commands”>> “Reset”>> “Send” to reset the instrument cluster node
disable TPMS with Porsche Piwis Cable
8) Select “Gateway”>> “Coding”>> “Tire pressure monitor Not installed”
disable TPMS with Porsche Piwis Cable
Exit the software program is the process is complete. Otherwise, continue to realize other functions.

Porsche Piwis Tester II with CF30 Laptop

PIWIS II Wifi for Porsche OEM Wireless Solution Released!

We now have PIWIS II Wifi for Porsche OEM Wireless Solution Released!

PIWIS II Wifi for Porsche OEM Wireless Solution Released! The wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi singal is really strong, which over 30 meters strong singal.

The product descprtion page please click here>>

If you want buy PIWIS II WIFI with laptop, please click here>>

PIWIS II WIFI

PIWIS II WIFI

 

For the piwis ii wifi settng, firstly you need connect the USB cable to laptop, then setting in [VCI Config] by inputing the SSID and Password of router.

A prerequisite for using wLAN is the availability of a suitable infrastructure. The workshop safety
guidelines must also permit the use of radio networks.
Connect the VCI to the PC using the supplied USB cable and start the VCI configuration software.
This can be accessed via the relevant link in the basic software.
The necessary setup steps are described separately in the section entitled wLAN configuration.

In order to establish a wLAN connection, the USB connection must be removed once
configuration has been completed successfully.
This is because once established, the USB connection is always active.

PIWIS II WIFI laptop connection

PORSCHE PIWIS TESTER  II WIFI laptop connection

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER

Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

Comparison Table of VAS 5054A

vas-5054a-vw-audi-diagnostic-new-9

The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.

Comparison Table of VAS 5054A:

Item Number SP33 SP33-B SP33-BO SP33-C SP33-D
Software Version ODIS V2.0/V2.02 ODIS V2.0/V2.02 ODIS V2.0/V2.02 V2.0/V2.02 V19
Language English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English/Japanese/
Portuguese/  Romanian/Korean /Dutch/Polish/
Turkish/Spanish/ French/Italian/ Croatian/Danish/
German/Swedish/
Finnish/Slovenian/
Czech/Russian/
Greek/Chinese
English Only
Support Vehicles VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
VW, Audi, Seat,
Skoda, Bentley and
Lamborghini
Bluetooth
Connection
Password
082145725 082145725 082145725 082145725 084301625
Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol
K line (ISO9141-2)
High-speed CAN (ISO
11898-2)
Low-speed CAN (ISO
11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol
Function Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
Read and erase ECU
fault codes, including
Check Engine, ABS,
SRS, transmisson
system, Radio, heating
ect. tunrn the check
engine light off
OKI Chip No OKI Chip No OKI Chip With OKI Chip With OKI Chip With OKI Chip
Connect Car By Cable & By Bluetooth By Cable & By Bluetooth By Cable & By Bluetooth By Cable & By Bluetooth By Cable & By Bluetooth
Update CD CD CD CD CD
Computer
Windows
System
Requirements
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS 5054A
Windows System
Language: American English
Windows XP(sp2/sp3)
System C:// have to be
NTFS format
C:// need to have at least
40GB space
for installing VAS5054A
Difference They have almost same function, SP33-D only has one language; while the SP33,SP33-B,SP33-BO,
SP33-C are multi-language, customer can swith language by themselves. SP33-C is the best quality one.

Difference Between MB SD C4 and Other C3/C4 in obd2tool.com

Difference Between MB SD C4 and Other C3/C4 in our website obd2tool.com

Number SP100-D SP45-B SP117 SP45-C SP45-F SP06
Name MB SD C4 Super MB Star C3 Best Star C3 Pro Ordinary Star C3 Red Star C3 MB Star C4
Original NO YES NO NO NO NO
Latest Version 2015.05 2015.03 2015.05 2015.03 2015.03 2015.03
Update Update Via HDD( new version comes can buy new HDD) Online Update one year for free Update Via HDD( new version comes can buy new HDD) Update Via HDD( new version comes can buy new HDD) Update Via HDD( new version comes can buy new HDD) Update Via HDD( new version comes can buy new HDD)
HDD Software DELL D630 HDD,External HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD
Vehicles Support Cars&Trucks Cars&Trucks Cars&Trucks 12V cars only Cars&Trucks Cars&Trucks
Connection Lan cable and WIFI connection Cable connection Cable connection Cable connection Cable connection Cable connection
Protocols k-line, CAN Bus, UDS K-line and CAN Bus K-line and CAN Bus K-line and CAN Bus K-line and CAN Bus K-line and CAN Bus

MB Star c4 more information , please checking:

http://www.obd2tool.com/goods-334-MB+SD+Connect+Compact+4+Star+Diagnostic+Tool+With+WiFi+201412+Version.html

VAG-COM Cable Vehicle List

VAG Vehicle List

VAG com 12.12 VCDS cables work with pretty much all VAG vehicles from 1994 to 2013 which have CAN, HEX or Dual K lines including (but not limited to!):

 

Audi A1  2010+

Audi A2 (8Z) 2000 – 2008

Audi A3/S3 (8L) 1997 – 2008

Audi A3/S3 (8P) 2004+

Audi A3 Cabriolet (8P chassis) 2008+

Audi A4/S4/RS4 (8D) 1995 – 2008

Audi A4/S4/RS4/Cabriolet (8E/8H) 2001+

Audi A4/S4/RS4/Cabriolet (??) 2008+

Audi A4/S4/RS4 (“B7″ platform) 2005+

Audi A4/S4/RS4 (B8 platform, 8K chassis) 2008+

Audi A5/Cabriolet 2007+

Audi A5/S5 Cabriolet (8F chassis) 2010+

Audi A5/S5 (B8 platform, 8T chassis) 2008+

Audi 100/A6/S6 (4A) 1991 – 1997

Audi A6/S6/RS6/allroad (4B) 1997 – 2006

Audi A6/S6/RS6 (C6 platform, 4F chassis) 2005+

Audi Q5 2007+

Audi Q5 (8R chassis) 2009+

Audi Q7 (4L) 2006+

Audi A8/S8 (4D) 1994 – 2002+

Audi A8/S8 (4E) 2003+

Audi TT (8N) 1999 – 2007

Audi TT (8J) 2007+

Audi R8 (42 chassis) 2007+

 

Seat Alhambra (7M) 1996+

Seat Altea (5P) 2004+

Seat Arosa (6B/6H) 1997 – 2004+

Seat Exeo (3R chassis) 2009+

Seat Ibiza / Cordoba (6K) 1993 – 2002+

Seat Ibiza / Cordoba (6L) 2002+

Seat Ibiza (6J chassis) 2008+

Seat Inca (9K) 1996 – 2003

Seat Leon / Toledo (1M) 2000+

Seat Leon (1P) 2006+

Seat Toledo (1L) 1992 – 1999+

Seat Toledo (5P) 2005+

 

Skoda Fabia (6Y) 2000+

Skoda Fabia (5J) 2005+

Skoda Felicia (6X) 1996 – 2001+

Skoda Octavia I (1U) 1997+

Skoda Octavia II (1Z) 2005+

Skoda Pick Up (67) 1996 – 2001

Skoda Roomster (5J) 2006+

Skoda Superb (3U) 2002+

Skoda Superb (3T chassis) 2008+

Skoda Yeti (5L chassis) 2010+

 

VW Caddy (9K) 1996 – 2003+

VW Caddy (2K) 2004+

VW Corrado +

VW Crafter (2E) 2006+

VW Eos (1F) 2006+

VW Fox/Spacefox/Sportvan/Suran (5Z) 2005+

VW Gol/Parati/Saveiro (5X) 2000+

VW Golf/Jetta II (19E) 1983 – 1992

VW Golf/Jetta/Vento/Cabriolet III (1H) 1992 – 1998+

VW Golf Cabriolet IV (1E) 1999 – 2002

VW Golf/Jetta/Bora IV (1J/9M) 1998 – 2006

VW Golf/Jetta/Bora V (1K/5M) 2004+

VW Golf/GTI/Jetta (1K/5K chassis) 2010+

VW Golf Variant/Wagon (1K chassis) 2007+

VW Golf Plus (5M chassis) 2005+

VW Golf Mk.6 (5K chassis) 2009+

VW LT (2D) 1996+

VW Lupo (6E/6X) 1999+

VW New Beetle/Cabriolet (1C/1Y/9C) 1999+

VW Passat (31/3A) 1988 – 1994+

VW Passat (3B) 1997 – 2005+

VW Passat (3C) 2006+

VW Passat CC (35/3C chassis) 2008+

VW Phaeton (3D) 2002+

VW Phaeton (3D chassis) (“facelift”, MY 2008+) 2007+

VW 6N/6N2) 1994 – 2002+  VW 9N) 2002+

VW Scirocco  2008+

VW Scirocco (13 chassis) 2009+

VW Sharan (7M) 1995+

VW Tiguan (5N chassis) 2008+

VW Touareg (7L) 2003+

VW Touareg (7L6 chassis) ( 2007+

VW Touran (1T) 2003+

VW Transporter ( 70 ) 1991 – 1996

VW Transporter (7D) 1997 – 2003

VW Transporter (7H/7J) 2003+

 

The list above only shows a few of the vehicles that our cables work with, if your VAG vehicle is not listed, do not worry as our cables work with 99% of all VAG vehicles from 1994 to 2013. If your VAG vehicle has a 16 pin OBDII port our VCDS cables will work. However,  please feel free to contact us if you want to check that your vehicle is compatible. – See more at: http://www.obd2tool.com/goods-4708-VAGCOM+1212+VCDS1212+HEX+USB+CAN+Interface.html