VAS 5054A ODIS V2.0 with OKI Chip, UDS Protocol Bluetooth Supported

VAS 5054A ODIS V2.0 with OKI Chip, UDS Protocol Bluetooth Supported

1. With OKI Chip it can support UDS Protocol.
2. Six Models supported: VW/AUDI/SKODA/SEAT/Bentley/Lamborghini
3. Multi-language available: English, Chinese, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russian, Greek and Polish.
4. Easy to use: No cables are needed for vehicle diagnostics using the VAS 5054A.

System Requirements:
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 40GB space for installing VAS5054A

1. The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
2. The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
3. The range of the wireless Bluetooth connection is 2 to 5 meters with no interference or blocked, depending on the environment and the type of Bluetooth adapter used on the PC side.
4. The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported

The new chip AN2135SC/AN2136SC solved communication issues of other CLIP versions. That make CLIP work more stable and can be used for a longer time. Using other versions of Renault CAN Clip Diagnostic Interface, the diagnostic interface will disconnect if users have no operation for 10 minutes around after successful communication to the car. With this new CAN CLIP for Renault, the issue solved, with the chip AN2135SC/AN2136SC. This is the PCB with new design.

VAS 5054A FAQ:

VAS 5054A FAQ:

Q: VAS 5054A Bluetooth can be used to reset service light, VAG K Can V4.6 can’t support service reset for Audi car? In what functions and features 5054A is better than VAG K+CAN 4.6?

A: VAS5054A  has stable function and good performance in diagnosing. VAG K Can V4.6 can work without connecting with computer, it is convenient and simple to use. Super VAG K+CAN V4.6 can be used to reset airbag light and active TV for a part of car models.

Q:Can VAS 5054A disable immobilizer like EC tools?

A:No, it can’t disable immobilizer; our 5054A only support reset every electronic control system in the car.

Q:Over the last couple weeks the car’s been giving me some trouble starting up. It starts, revs to 1200 briefly and then cuts out. My initial thought was it just had to Do with the cold weather lately and remedied I by just holding the key a bit longer in the on position. Today though, I had to actually give it a significant amount of throttle to keep from cutting out when starting. Then it died at two intersections. It starts up fine again, but I’m stumped as to what the issue might be. My initial thought is the fuel pump. Anything else it could be?

A:VW / Audi / Skoda … blink codes, trouble codes (VAG), fault codes (Ross), tomato, potato. All I can tell you is the Master Tech who does side jobs on my cars uses a 5054A ODIS V3.0.1. With the right cables / software it pulled the trouble codes for the ABS in my ’90 Corrado to condemn it. It’s been a long time since I actually counted those blinks to diagnose. The point is it’s all the same info whether it blinks a led or displayed as text with graphics on a screen (my preference).

Q:I found this VAS 5054a software and bluetooth can obd2 interface. Is this a ligit vas program? and will it do the same or more as the ross tech software?

A:Now if you use 5054 you can get the automated diagnosis on any fault code more than Ross tech can support! And it is cheaper than Ross tech and easy to update too.

Q:Light stays on and vcds will NOT clear it? I used Win XP when I installed Vagcom 11.11. Any idea?

A:You would need VAS-PC and a 5054a Head to enter into in the basic setting / adaption of the module which I’m guessing you don’t have. That’s what the dealer will do though.

Q:I got my tester with Best obd2 scanner VAS 5054A ODIS and this is what I found when i tested the car:
P1626 Databus Drivetrain Missing message from trans ctrl mod.They are no errors in the transmission control module, only in both ECU’s. How to fix?

A: it’s a static message, ie it is not currently fault-free. There will be more information available from a paid-for VCDS scanner cable together with a laptop, if that’s an option for you. This is because a regular OBD-II scanner only reports emissions information and not the car computers’ diagnostics information, such as open circuit wires.

Q:I have the latest Vag Com and Ihave VAS 5054A.I disconnected the speedo for a short while and when i put it back it triggered the immobilizer and the car will not run now for more than a few seconds. It seems the speedo lost its link to the keys and they need to be rematched. I do not want to take it to Audi. I have taken a full dump of the eeprom (G93LC86C) but would need to know which addresses are the 4 digit PIN. Does anyone know how to obtain this – either by finding it in the eeprom dump or using some piece of software or hardware, or can i get it from a login to GeKo?

A:Pull out your radio (takes 10 minutes), write down the s/n#, and ask the service manager really nicely, and they should give you your code for free.

How to install Renault CAN CLIP V162 on Window XP

Renault CAN Clip V162, how to install? how-to guide of  Renault CAN Clip V162 software installation for you all…

the installation instruction here for Windows xp users.
Renault can clip widows 7 32 bit needs luck!

Step1. ready for can clip V162 installation
Unzip and open Renault CAN Clip V162 software folder.
Copy “Activation (Patch 3)” folder to desktop.
Open “Activation (Patch 3)” folder,
right click on the “Crack Renault Clip” registration entries
then click on “Merge”->“Yes” ->“OK”.

Step2. Renault can clip V162  first installation
Open the “Setup”.exe.
Click on “First Installation” icon.
Select  “I accept…” option and click on “Next”.
Select   “Other Countries” and click on “Next”.
Select  “English” and click on “Next”.
Select   “Renault” click on “Next” then “Next”.

Pop up “Windows Resource Kit Tools Setup Wizard”.
Click on “Next”
choose “I agree the agreement…”
Click on “Install Now”

Wait a while for completing then click on “Finish”
Restart your computer
click on “Finish”
Renault CAN Clip V162 “First Installation” complete!

Step3. CLIP V162 Registration
Right click the “CLIP” icon on desktop, go to “Properties”
click on “Find Target”
go to disk C:/CLIP_X91/Lib/ Application
Cut the “RSRWin” application to desktop
Go to Renault CAN Clip V162 software folder ->“Activation (Patch 3)” folder
Copy the another “RSRWin” application to disk C:/ CLIP_X91/ Lib/ Application

Open the “RSRWin” application in Application folder
Click on “I understand and accept the licence…” then “Register me now”.
“Are you part of Renault Network?”
Select  “No”
go to Renault CAN Clip V162 software folder and find a picture (Renault CLIP Registration Step-4)
enter the required “unlocking code” as the pic shows
click on “Confirm”
“Registration successful”. Click on “OK”

Step4. “RSRWin” application replacement
replace the “RSRWin” application in  disk C:/CLIP_X91/Lib/ Application with the one on desktop
“Found New Hardware Wizard”
click on “Next”, then “Finish”
Install device driver successfully.

Step5. setup com port
go to  Computer management
select “Device Manager” ->“Bosch automotive service solution device” ->“18-alliance vehicle communication interface”

Step6. last setup for the use of CLIP
Right click on desktop to open “Display Properties”
Go to “Screen Saver” ->“Power and setup”
Change Settings: Power scheme: Always on->Turn off monitor: Never, Never->Turn off hard disk: Never, Never->System standby: Never, Never
After that, click on “Apply” then “OK”

Now you can use Renault CAN Clip Interface!

How does Nissan Consult III work on Japanese JDM GTR 2007

Does Nissan Consult III Plus diagnostic scanner work on 2007 JDM GT-R; i mean, Japanese domestic market. I cannot find out the option of JDM.

Yes! Definitely yes. Consult 3 Plus can work well on Japanese domestic cars, Nissan and GTR (1996-2011). Setup in the software interface should be like this:
Step 1 – go to settings
Step 2 – select country selection

Step 3 – select DOM

In Nissan Consult III software, Japanese domestic market is shorten as domestic; that is DOM, not JDM.

Then you can perform on IBM Lenovo T42 Notebook running Windows XP.

Automated Self-Diagnostics

The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology

With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

Enhanced data management with improved laptop

New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

Capable of handling multiple complex defects

The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

Map data update function for hard-disk navigation system

Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future products.

(1) CONSULT: Computerized On-Board System Universal Tester. CONSULT introduced in 1989, CONSULT-II introduced in 1999. CONSULT-III is 3rd generation model.

(2) Communication distance: radius of 5m approx.

NOTE: for special functions on GTR, you need to buy GTR Card.


UCDS Ford UCDSYS Ford diagnostic and chip tuning tool new released, Ford UCDS diagnostic tool UCDS Pro+ support diagnosis, ECU Flash and mileage functions, UCDS Ford from can work as Ford ECU Chip Tunning tool as well, can replace Ford VCM II completely.

Ford UCDS from is the 2017 New Released Diagnostic Adapter with neweest software V1.26.008 can replace Ford VCM II perferctly, just one difference, UCDS Ford cannot key programming, but UCDS (Universal CAN Diagnostic System) for Ford can support Mileage Correction and it is full function type has 35 tokens also support special functions like VBF LOADER, UPDATE WIZARD, DIRECT CONFIG.

The UFord UCDSYS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual  UCDS-programm.The software interface of the UCDS interface has main window’s mode. You need to select the type of the vehicle or select the service mode for adapter`s firmware update or other service functions.UCDS currently works with the following platforms: Focus II 2004-2011; Focus III 2011, 2015 ; Kuga I, Kuga II; C-MAX; S-MAX; MONDEO IV; Mondeo 2015 ; Galaxy ; Tansit; Fiesta 2008, 20015 etc..

1. UCDS support special functions like: VBF LOADER, UPDATE WIZARD, DIRECT CONFIG
2. UCDS support more vehicles than vcmii
3. UCDS support odometer correction, while VCMII can’t
4. UCDS support both online and offline programming, while VOBDII can only support online programming.
5. UCDS support the reconfiguration of the car, the engine firmware stock firmware, chip tuning, vcmii can’t.
6. VCMII support key programming, while UCDS can’t

Difference Between Cummins INLINE 5 and Cummins INLINE 6


Difference Between Cummins INLINE 5 and Cummins INLINE 6
1. Cummins INLINE 5 usb cable is 2 meter, Cummins INLINE 6 is 3 meter
2.Cummins INLINE 5 DB25F/6-pin data link cable and OBDII 16pin cable
Cummins INLINE 6 DB25F/3-pin/2-pin/2-pin cable
3.With Different Version Software

For very heavy duty vehicles, the Cummins M series engines, which are 10.8 litre straight sixes, are often used. Used truck engines can be picked up from a variety of places, though knowing which type of engine you require and how much the going price is, can help to ensure that you receive a great engine at a suitable price. Hopefully this article has helped you, or at least shown you some of the options available.

How To register the Autel MS906 diagnostic scanner:
1. Visit the website:
2. On the Sign In page, input your account ID and other information to log in, if you already have an account.
3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side.
4. Enter the required information in the input fields, read through Autel’s Terms and Conditions and tick on Agree, and then click Create MaxiSYS MS906 ID at the bottom to continue.
5. The online system will automatically send a confirmation email to the registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens.
6. Find out the device’s serial number and password from the About section of the Settings application on the display tablet.
7. Select the product model of your device, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure

Using MB Star C3, C4, SD C4 to do online SCN coding

A customer asked me that if it is possible to do program injectors and gear resetting with his MB Star SD C4 diagnostic tool for the following cars:
E 320 cdi year 2006 W211 224 Ps v6
C 220 cdi Year 1999 w202 125 Ps
C 220 cdi Year 1998 s202 125 Ps

The answer is yes. but it requires the MB Star tool to open SCN coding function. As you can see, there is a “tips,, option in SD C4 software, which usually is not available. You can also find this function in Benz star c3 and MB Star C4 software interface. This is the SCN programming function. It can be used only after you purchase account and password for the function. Here are steps on buying and using this function.

How to get SCN coding function:
1.Purchase online SCN coding service.
2.Provide your order number of the SCN coding service to OBD2TOOL.COM customer service to activate this function.

How to use SCN coding function:
1.Prepare MB Star SD C4. a laptop. Teamviewer and the cars that you are going to do coding or resetting.
2.Select car model and system that you want to program, such as headlight XALWA-L.
3.Select CONTROL unit adaptations.
4.Select offline program (CONTROL MODULE PROGRAMMING) then (SCN coding).
5.Run teamviewer and enter teamviewer id and password
6.Login server (DALMLER)
7.Login server and finish SCN coding.

vt55 ateq‘s OBD software is compatible for all Asian and European vehicle brands that require OBD synchronization and its software is updateable by using a standard USB cable hooked to a PC. The simple PC interface guides the user through a minimum of steps. An upgradable TPMS tool has never been so important as new Tire Pressure Monitoring Sensors are being fitted to new car models at an increasing rate.

Why should buy Launch X431 V?

The likely benefits seen with the Bluetooth X431 V (X431 Pro) Wi-Fi Bluetooth Full System Android Scanpad include some of the fallowing;

Fast and efficient data coding– with All the hallmarks of a fast device, the mechanic and the driver are at peace in getting fast data coding and repairs. This reduces the repair time and the amount of money likely spent on the other repair processes.

Multilingual– the best obd2 scanner has the interface covering several universal languages. The mechanic needs no effort in trying to get translations in as far as the code meanings and repair formulas are concerned.

Wide compatibility– Covering several European and Asian cars, the device has what it takes to be used globally. The addition of the Indian car models makes its use even more widespread.

I have a Porsche PIWIS clone and it’s works fine. It has most piwis tester 2 functionality, can reset error codes, code modules, read current module data, update module firmware etc. They generally can’t do SCN coding (i.e. the coding required when a new control module is installed to lock it to VIN), key programming, or security coding in general – well not without paying additional ‘one-time’ use fees.

Developer mode is a special Piwis software that allow a lot of advanced coding normally reserved only to Factory. With this function you will have a tool that can do more than software of official Porsche Dealer. For example, you can reprogram all ECUs completely offline.Engineer Mode  software is able to work with offline programming for almost all modules, also you can access special functions with it.

Does this PS2 can diagnose caterpilar models?

PS2 Truck Scanner

PS2 Truck Scanner

Most of the car owners are maintenance according to their car driving mileage, for some owners, if not achieve the required mileage and also maintenance, but also need to use the OBD diagnostic tools for vehicle maintenance, especially the temperature low special attention to. Xtool PS2 is a high-tech and professional automobile diagnostic tool for truck, which supports all protocols and all modes for the OBD II. This PS2 can do Car year before 2010,and few parts of car year after 2010. And it can be upgraded online.

Does this PS2 can diagnose caterpilar models? Can i print the diagnostic result? Yes. There is CAT software for PS2. You can use PS2 to diagnose caterpilar models. You can print the diagnostic result via computer.As a result of massive field test, PS2 becomes a matured and integrated product. Excellence is our motto. We make every effort to develop and to innovate our product which enables PS2 to become an reliable automobile diagnostic equipment. The speedy test, the accuracy and the user-friendly design of Professional Diagnostic Tools SP2 help us to enjoy the support of all customers!

How to clear the Cache files for update tool? why should i do this? In order to avoid the machine does not take after the upgrade. Clear the way: Desktop find upgrade tool icon, right mouse click / select (Open File Location) / Select down_sd folder, delete all the files inside the archive and. New Release ps2 heavy duty truck diagnostic tool comes with 8 inches true color TFT touch screen, supports bluetooth wireless connection, Specially designed diagnostic tool for automotive technicians.

Super MB Star C3 for Benz Trucks and Cars

Auto-Link Blue STAR  C3  be famous as a generation diagnostic & program tool for Mercedes-Benz Trucks and Cars.

Super MB Star C3 Multiplexer work stable with good performance, have a good reputation in the market. And supply best quality Super MB Star C3 Multiplexer for our customers. You can check the Super C3 PCB board as follow.


Super MB Star C3 Multiplexer PCB mainboard display:

20150619010350 33788 Super MB Star C3 Multiplexer for Benz Trucks and Cars

You may wondering that what vehicles does the super mb star C3 support ?

The super MB Star C3 Supported Vehicle including:
Passenger Car Support List:
A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126),
E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197),
M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),
CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)

Van Support List:
MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)

Truck Support List:
Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series

Unimog Support List:
U20,  UGN,  UHN

Bus Support List:
TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,  Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400,  FURTHER MODEL SERIES

Super Sports Car Support List:


Super MB STAR C3 realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. Super Mb star C3 diagnosis tool applies the latest high-tech central gateway system of car model 221/211 and 203 with software version can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on…