VVDI2 copies Audi Q5 2015 – Possible

Question: VVDI2 Does Audi Q5 2015 Copy?


No plz car will stopped
you will lost your bcm


Yes it do, with VVDI2 i have program a key for AUDI Q5 2015 everything ok, car is starting but remote doesnt work

Then you have a fault in the vehicle, or a bad fob. Or the wrong fob. There are prox and slot versions. They have different fcc. They will still program the chip portion and allow the vehicle to start however.

it was a slot smart key.. but the Fcc are not the same.. maybe thats why remote didnt open/close

But the Auto Scanner Tool will program fine. 2015 q5 should be slot or comfort access bcm2 prox. It programs the remote and key at the same time. If you have an existing key read bcm data, prepare dealer key then do key learn. 5 minute job. It’s under immob 5 sub menu
The above people with issues either a)can’t follow the directions or b) are using bad or locked keys. C) my experience is in the North American market. Other markets may vary

50/50 chance:
It all depends on the software of the bcm some will say yes and some will no, those who will say yes they came across an old version of bcm which is not updated by company, those who said no they came across a newer version of flash which is not supported by vvdi2 . So long story short its not about the device its about the software in the car. Its a 50/50 chance

Xtool X100 Pad tablet key programmer update problem

I have a problem with Xtool X100 Pad tablet key programmer. After update system x100 pad tablet stopped booting and did not start.

Before that on display show me system update i download then tablet has self reset and turn on. Then on display show only xtool logo don’t run android system.


What can i do? Need to do factory reset on the pad?


1) Download the OBD2 Scanner Xtool X-100 Pad firmware reflash file


2) Paste the file on laptop desktop, connect X100 Pad with laptop

3) Contact Xtool factory technician via Teamviwer

4) They will help reflash firmware.

Hope it helps!

XTOOL X-100 PAD Tablet Key Programmer with EEPROM Adapter Support Special Functions Free Update

XTOOL X100 PAD is a tablet with the latest technologies to perform key programming, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.

Support language: English Only, Dealer Code: XT0240, free update online

Key Programming Features: New remote controller programming,Reset ECM & reset immobilizer,New immobilizer programming,PIN Code reading with EEPROM,With full and strong database for the most important vehicle makes, New keys programming etc

Oil Reset Functions Feature: Support maintenance light reset for Volvo, Land Rover, support Porsche Cayenne, Panamera till 2012, Support the lifespan percentage resetting of engine oil for Buick, Cadillac etc

EEPROM Adapter Features: PIN Code Reading, ECU Initializing, Chip Programming

Technical Details


XTOOL Scanner X-100 Pad Functions:
Key programming
Oil Reset/Engine oil light reset
Tire Pressure Warning Light Reset (Manual Operation)
Timing belt light reset (Manual Operation)
EPB Electrical Parking Brake Adaptation
TPS Throttle Body Adaptation
Steering Angle Calibration
Battery Reset
PIN Code Reading
Hexadcimal editor(Win Hex)
OBDII Diagnosis
Support the latest vehicles with CAN BUS and UDS protocol
Update Via WIFI (always equip your device with the latest software)

X-100 Pad on obd2tool.com Specifications:
Operating System: Android
Processor: Quad-core 1.30GHz Processor
Memory: 1G RAM, 8G FLASH
Display: 7 inch IPS 5-point multi-touch screen with 1024×600P resolution
Sensors: Gravity Sensor, Light Sensor
Audio Input/Output: Microphone, Dual Speakers, 4-Band 3.5 mm stereo/standard headset jack
Power and Battery: 2400mAh, 3.7V lithium-polymer battery
Power Voltage: 5V
Power Consumption: 8W
Operating Temperature: -20 to 50℃(-4 to 126℉)
Humidity: <90%
X100 Pad Key Programmer Vehicle Coverage:
Asia: Toyota, Lexus, for Honda, Acura, Mazda, Nissan, Infiniti, Mitsubishi, Subaru, Suzuki, Kia, Hyundai, Daewoo, SSANGYONG, Proton, etc
Europe: Audi, VW, Skoda, Seat, for Porsche, Opel, Citroen, Peugeot, Jaguar, Land Rover, Lincoln, Renault, etc
America: GM, Cadillac, Buick, Chrysler, Ford etc
China: Great Wall, Chery, Brilliance-auto, Geely, LIFAN, HAFEI, CHANGAN, LANDWIND, BYD, BYD , JAC, etc


14-5 14-7 14-8 14-9

How Does Xtool X100 PAD2 Read Security Code For Citroen C-Quatre 2009

X-100 PAD 2 is a dealer level key programmer. It provides customers with professional key programming and some special functions. This article records how uobdii engineers use X100 PAD2 to read security code for Citroen.

Vehicle model: Citroen C-Quarte 2009
Device: XTOOL Diagnostic Tool X100 PAD2 Special Functions Expert

Here is detailed steps:
Connect to vehicle directly with cable (picture shown below)


Go to the main menu and click the icon


Then select [DITROEN]


Choose [Read Security Code]


Then switch ignition off and press OK to continue



After press OK, switch on ignition immediately


It is reading password


Switch ignition off and press OK

Follow the prompts
-press OK, switch on ignition
-Switch ignition off, press OK for several times
Finally the security code read successfully!


In the final step, be patient!

Read Security Code function is just a small part of XTOOL X100 PAD2, if you want to learn more about this tablet key programmer, click here: