How to reset SBC with Mercedes Benz MB SD Connect C4 Star diagnostic tool

Today we’d like to share with you , How to reset SBC with Mercedes Benz MB SD Connect C4 Star diagnostic tool

We need device:

MB SD Connect C4 with DELL D630 HDD




Here displays the SBC unit extend service live instruction:

In Developer Mode:

1. Make sure engine is running

2. Run DAS, find out and locate following:

Select Entwickelingsdaten – >hit F3

Select ansteueringen -> hit F3

Select Gesamstliste aller Ansteuerungen-> hit F3
to see how many times brake has been pressed. There is a option that says: Bremsenzahler (DJ_GetBrLive)

3. Then 1 line down there you see Bremsenzahler aktualisieren und Lebensdauerzahler F neu berechenen -> click the icon

Parameter uINBR = 0, hit F3

4. Scroll 1 line down Bremsenzahler auf beliebigen Wert setzen (DJ_SetNBr) -> click it
Parameter uINBR = 0, hit F3

5. Then scroll down until you see the option:

Lebensdauerzahler F neu berechenen (DJ_CalcLiveTime)
Parameter uINBR = 0, hit F3

Lebensdauerzahler F neu berechenen und schreiben (DJ_BuildAndWriteF)
Parameter uINBR = 0, hit F3

6. Log out of SBC
7. Log out of vehicle

Let vehicle engine run at least 10 minutes or drive a 10 minutes at least road test.

If no coils are damaged, SBC fault code is not AKTUEL

Hope it would help you, if any questions, please contact us at :

Some problem when you operate the MB Star C4

So many customer meet some problem when they operate MB Star C4.If you also have some problem .pls do not worry about that .you could tell us what is happened and send the picture which step could not work .Our engineer will solve that one by one for you .


Here Let us to show some problem we often meet then how to solve that as following :


Q1: The MB Star C4 could work with the window 7?

A1: Although the moveable hard disk version is compatible with WIN7, better Professional version. But we suggest you not use WIN7, 90% sdc4 software get broken because of the usage of WIN7.


Q2: When you operate the mb star c4 but that the Screen become blue after  insert SD C4 Dell D60 hard disk into the computer and open it.

A2: Pls note : you need make sure your Dell D630 computer is integrated video card and with 1GB memory, because the D630 of discrete video card is easy to have blue screen or shutdown and restart, restart and shutdown.


Q3:When you operate that .if appear the problem as following picture ?

A3: Pls do not worry about that .you need activate that .and then we will send the the Xentry deverloper file then you will activate that is ok .

Here i wont list more one by one here ,if you meet any problem when you operate the mb star c4 ,pls contact us on our website :

Newest 4.94 Digiprog III Odometer Master Programmer

Digiprog 3 with newest version V4.85, compared with Digiprog 3 V4.94 version, it has added more car models, performance also better.


Brand: YanHua
Newest Version: V4.94
Supported Languages: English, Spanish, French, Portuguese, Italian, Turkish,  Dutch
V4.85 Version Newly Added Vehicles:
Citroen: C3/DS3 new versions
Dodge: Charger 24C16
VW: Diag new version
Fiorino 95080/ECU95320
Ducato/Punto 95160
Evoque 93C76
3 C66
Crafter/Sprinter EZS new versions
Lancer new version
Qashqai 2011 HCS12
370Z C86
Scenic 24c16+ABS
Other Features: 
Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication

Newest V1.8.1504.24 Digimaster3 iii Odometer Correction

Digimaster III added models for mileage correction and airbag resetting Version:1.8.1504.24 (2015-04-30)

Updating models for mileage correction:
1 Peugeot 408 2015 BSI 95256 95256
2 Peugeot 408 2015 Instrument 95160 95160
3 Roewe 350 2014 Instrument 95080 95080
4 Roewe 350 2014 Body ECU 24C16 24C16
5 Faw Elysee Instrument 93C86 93C86
6 Faw Elysee BSI 95256 95256
7 JMC Shunda 24C08 24C08
8 Howo 24C04 24C04

Updating models for airbag resetting:
1 Ford Mondeo DS7T-14B321-EB 95640
2 Ford Mondeo BS7T-14B321-AC 95320
3 Mitsubishi Jin Hyun 8635A321-0285011550 95640
4 Cadillac Seville 5WY87270 95160


Difference Between MB SD C4 and Other C3/C4 in

Difference Between MB SD C4 and Other C3/C4 in our website

Number SP100-D SP45-B SP117 SP45-C SP45-F SP06
Name MB SD C4 Super MB Star C3 Best Star C3 Pro Ordinary Star C3 Red Star C3 MB Star C4
Latest Version 2015.05 2015.03 2015.05 2015.03 2015.03 2015.03
Update Update Via HDD( new version comes can buy new HDD) Online Update one year for free Update Via HDD( new version comes can buy new HDD) Update Via HDD( new version comes can buy new HDD) Update Via HDD( new version comes can buy new HDD) Update Via HDD( new version comes can buy new HDD)
HDD Software DELL D630 HDD,External HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD DELL D630 HDD,External HDD, IBM T30 HDD
Vehicles Support Cars&Trucks Cars&Trucks Cars&Trucks 12V cars only Cars&Trucks Cars&Trucks
Connection Lan cable and WIFI connection Cable connection Cable connection Cable connection Cable connection Cable connection
Protocols k-line, CAN Bus, UDS K-line and CAN Bus K-line and CAN Bus K-line and CAN Bus K-line and CAN Bus K-line and CAN Bus

MB Star c4 more information , please checking:

2002 gmc sierra 1500 5.3 v8 p0507

post here’s a little about the truck. It has 180000 miles. The service engine light has not been on until now. Just 2 thousands miles ago I hopped a curb and hit a sign. I do not remember the incident in detail. Got the truck realigned and inspected and everything was good. Just last week I have to emergency drive to southern California from reno at 2am. Its about 8 hours I’m not a speed racer but I cruised controlled about 75 until I started to hit traffic at 8 in the morning. Anyways I hot socal. Stayed there for a a hour or so the drove to Vegas. Spent the night there and drove back to reno the following afternoon. 1150 miles in 48 hours. After I got home I noticed the trck is idling high or it will idle low then high. Low then high.and it will keep doing that until I put it in drive and go. Cold starts the truck shakes while starting and once started he idle problem starts So I bought a simple obd2  scanner and this is what I got. P0507. Not sure how to go about diagnosing this so help would be appreciated I do not want to take it to the shop because I don’t have a lot of money but.if.its my only choice I will. I also changed the spark plugs and cleaned the air.filter in vegas just recently and had a low coolant problem in vegas where the truck. Was running at 250f degrees until I pulled into a Walmart and topped off he reservoir

from USA to USA : LAUNCH X431 Creader VIII and X431 Creader VII+

We have LAUNCH X431 Creader VIII and LAUNCH Creader VII+ on sale on our website.

Free Shipping from USA to USA by UPS,which will be faster ,it can also save your custom duty.

Launch OBDII Code Reader X431 Creader VIII (CRP129) Four Systems Diagnosis    175USD



Launch X431 OBDII Code Reader Creader VII+ ( OBD2 CRP123) Multi-language   185USD



For more information please visit

VAG-COM Cable Vehicle List

VAG Vehicle List

VAG com 12.12 VCDS cables work with pretty much all VAG vehicles from 1994 to 2013 which have CAN, HEX or Dual K lines including (but not limited to!):


Audi A1  2010+

Audi A2 (8Z) 2000 – 2008

Audi A3/S3 (8L) 1997 – 2008

Audi A3/S3 (8P) 2004+

Audi A3 Cabriolet (8P chassis) 2008+

Audi A4/S4/RS4 (8D) 1995 – 2008

Audi A4/S4/RS4/Cabriolet (8E/8H) 2001+

Audi A4/S4/RS4/Cabriolet (??) 2008+

Audi A4/S4/RS4 (“B7″ platform) 2005+

Audi A4/S4/RS4 (B8 platform, 8K chassis) 2008+

Audi A5/Cabriolet 2007+

Audi A5/S5 Cabriolet (8F chassis) 2010+

Audi A5/S5 (B8 platform, 8T chassis) 2008+

Audi 100/A6/S6 (4A) 1991 – 1997

Audi A6/S6/RS6/allroad (4B) 1997 – 2006

Audi A6/S6/RS6 (C6 platform, 4F chassis) 2005+

Audi Q5 2007+

Audi Q5 (8R chassis) 2009+

Audi Q7 (4L) 2006+

Audi A8/S8 (4D) 1994 – 2002+

Audi A8/S8 (4E) 2003+

Audi TT (8N) 1999 – 2007

Audi TT (8J) 2007+

Audi R8 (42 chassis) 2007+


Seat Alhambra (7M) 1996+

Seat Altea (5P) 2004+

Seat Arosa (6B/6H) 1997 – 2004+

Seat Exeo (3R chassis) 2009+

Seat Ibiza / Cordoba (6K) 1993 – 2002+

Seat Ibiza / Cordoba (6L) 2002+

Seat Ibiza (6J chassis) 2008+

Seat Inca (9K) 1996 – 2003

Seat Leon / Toledo (1M) 2000+

Seat Leon (1P) 2006+

Seat Toledo (1L) 1992 – 1999+

Seat Toledo (5P) 2005+


Skoda Fabia (6Y) 2000+

Skoda Fabia (5J) 2005+

Skoda Felicia (6X) 1996 – 2001+

Skoda Octavia I (1U) 1997+

Skoda Octavia II (1Z) 2005+

Skoda Pick Up (67) 1996 – 2001

Skoda Roomster (5J) 2006+

Skoda Superb (3U) 2002+

Skoda Superb (3T chassis) 2008+

Skoda Yeti (5L chassis) 2010+


VW Caddy (9K) 1996 – 2003+

VW Caddy (2K) 2004+

VW Corrado +

VW Crafter (2E) 2006+

VW Eos (1F) 2006+

VW Fox/Spacefox/Sportvan/Suran (5Z) 2005+

VW Gol/Parati/Saveiro (5X) 2000+

VW Golf/Jetta II (19E) 1983 – 1992

VW Golf/Jetta/Vento/Cabriolet III (1H) 1992 – 1998+

VW Golf Cabriolet IV (1E) 1999 – 2002

VW Golf/Jetta/Bora IV (1J/9M) 1998 – 2006

VW Golf/Jetta/Bora V (1K/5M) 2004+

VW Golf/GTI/Jetta (1K/5K chassis) 2010+

VW Golf Variant/Wagon (1K chassis) 2007+

VW Golf Plus (5M chassis) 2005+

VW Golf Mk.6 (5K chassis) 2009+

VW LT (2D) 1996+

VW Lupo (6E/6X) 1999+

VW New Beetle/Cabriolet (1C/1Y/9C) 1999+

VW Passat (31/3A) 1988 – 1994+

VW Passat (3B) 1997 – 2005+

VW Passat (3C) 2006+

VW Passat CC (35/3C chassis) 2008+

VW Phaeton (3D) 2002+

VW Phaeton (3D chassis) (“facelift”, MY 2008+) 2007+

VW 6N/6N2) 1994 – 2002+  VW 9N) 2002+

VW Scirocco  2008+

VW Scirocco (13 chassis) 2009+

VW Sharan (7M) 1995+

VW Tiguan (5N chassis) 2008+

VW Touareg (7L) 2003+

VW Touareg (7L6 chassis) ( 2007+

VW Touran (1T) 2003+

VW Transporter ( 70 ) 1991 – 1996

VW Transporter (7D) 1997 – 2003

VW Transporter (7H/7J) 2003+


The list above only shows a few of the vehicles that our cables work with, if your VAG vehicle is not listed, do not worry as our cables work with 99% of all VAG vehicles from 1994 to 2013. If your VAG vehicle has a 16 pin OBDII port our VCDS cables will work. However,  please feel free to contact us if you want to check that your vehicle is compatible. – See more at:

How to install BMW Carsoft 6.5 Software?

MCU controlled Interface for BMW Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing.

BMW Carsoft 6.5

How to install BMW Carsoft 6.5 Software?

1) You need to copy all BMW Carsoft 6.5 file folder on the software driver CD to your hard disk, so you can make sure the installation will be more stable.

2) Run the installation: Open the folder and double click on the “SETUP CAR SOFT.exe

3) When the system shows the BMW Carsoft 6.5 welcome surface–” Installation CARSOFT BMW-Diagnosis V6.5″, then click “Next”.

4) When the system display a window about “Software License Agreement”, click “Yes” to continue the installation, follow the steps, the BMW Carsoft 6.5 program will be installed into your computer automatically.

5) Then you can find the BMW Carsoft 6.5 file folder and open it.

6) Copy all the 10 files in the file folder of “crack” and paste them into the file folder of the “cm75f” at the directory C:\cm75f\ which was created during the automatic installation of the BMW Carsoft 6.5 software.

7) When display if you want to replace the old file when you paste the new 10 files into the folder, just click “Yes all”.

8) Next, paste the 10 files into the file folder of “BMW” at the directory C:\Program Files\CARSOFT\BMW and the same, replace all the old files.

9) After complete above steps, you can run the BMW Carsoft 6.5. Select the “CARSOFT” folder in the menu of “Programs”. Click the “BMW” to run the program.

3 steps to operate BMW B800 old BMW airbag reset tool

1) .   Airbag warning light on, need to clear crash data and turn off light.

2) Turn on key (DO NOT START CNGINE)

2). Plug B800 into diagnostic port, B800 is ready to use when it displays “FA”. (Reverse steps 1 and 2 if you encounter problems).

3). Use the “Scroll” button to select any of the following function, including: FR (Read Airbag Faults), CR (Clear Airbag light/Faults), therefore it worked perfectly to clear air bag code, code has not returned.

4) Airbag warning light is off.