The 10 Best Choices On The Market Review 2018

Looking to buy a scan tool or considering one of Autel Scanner impressive product line?. The company makes some of the best OBD scanners available on the market today.

It’s safe to say that you can’t go wrong with an Autel Scanner. But out of them all, what is the best Autel scanner? Today I will introduce top Autel scanner review on the market.

10 Autel Scanners Detailed Reviews
1. Autel Maxysis MS908CV: Heavy Duty Diagnostic Scan Tool

AUTEL-SCANNER-1

If you’re looking for a scanner that can troubleshoot system problems in heavy-duty vehicles then look no further than the Maxysis MS908CV.

This Autel scanner comes with all the connectors for heavy-duty vehicles.

Features
Vehicle coverage
Works on OBD1 and OBD2 heavy-duty vehicles. They include trucks, vans, and buses.

unctionality
Apart from reading and clearing codes, the MS908CV supports oil reset, brake bleeding, EPB, DPF, IMMO key programming, injector throttle and many more.
It also covers special functions like adaptations, calibration, injector quantity adjustment and DPF regeneration.

Connectivity
The scan tool features Bluetooth for wireless connectivity while you are working.
It also has Wi-Fi for internet access. You can go online and get diagnostic and repair tips or update its software.

2. Autel MD802 Maxidiag Elite: A Full System Scanner

AUTEL-SCANNER-2

Autel’s MD802 Maxidiag is one of the few scan tools that actually perform deep system troubleshooting.
Other than electronic systems like an engine, transmission, airbag, and ABS, this Autel scanner also covers chassis, body and powertrain.
With such functionality, you’d be forgiven for mistaking it for a professional scan tool.
In actual sense, you don’t need professional knowledge to use it. It’s actually simple and straightforward.

Features
Vehicle coverage
Works on all mainstream made of cars made in America, Europe, and Asia. However, it is strictly an OBD2 scanner. Meaning the car should be a 1996 or newer model.

Functionality
It does a full system diagnosis that involves reading and clearing trouble codes for the engine (Check Engine Light), ABS, SRS, and transmission.
In addition to that, the scanner supports special test modes. They include O2 monitor tests, component test, onboard monitor test, oil reset test and I/M readiness test.
It provides live data, freezes frame data and also retrieves vehicle information.

Connectivity
While this Autel scanner does not support wireless connections, it can connect to a PC. There’s a USB cable that comes with the package.
It is meant to help you access the internet via your PC and update the device’s software.

Interface
The total weight of Maxidag MD802 is just one pound. Its dimensions are 14.6 x 3.9 x 8.7. That’s small enough to be handheld or stored in a toolbox or driver’s compartment.

3. Autel MaxiDiag MD808: Diagnostic Scanner Tool

AUTEL-SCANNER-3

Compared to its predecessor (MaxiDiag MD802), the MD808 is a revolutionary Autel scanner for DIY technicians. It actually qualifies as a service tool on account of the handy features it has to offer.

Features
Vehicle coverage
This Autel scanner is an OBD2 diagnostic device. Therefore it works on all mainstream brand vehicles manufactured from 1996 to date.

Autel MaxiDiag MD808
Image Source
Functionality
The Autel MaxiDiag MD808 offers both basic and advanced diagnostic functions. On the basic front, the device troubleshoots the four primary systems of a vehicle. They are an engine, ABS, SRS, and transmission.

With regards to advanced functions, you can use it for an oil reset, SAS, BMS, EPB, and DPF. In short, this Autel scanner covers virtually every basic OBD2 diagnosis as well as additional tests that enhance a car’s performance.

Connectivity
Although the scanner doesn’t support a direct USB connection to a PC, it does come with an SD card. You can download updates from a PC to the SD card, and when you insert the card this device will automatically load the updates.

Interface
Autel MaxiDiag MD808
Image Source
Besides the rugged and attractive design, the Autel MaxiDiag MD808 features a full-color screen that measures 4 inches. The 800 x 480 screen makes navigation through menus pretty easy.
The whole device measures 13 x 9.9 x 3.9 inches and weighs 3.55 pounds. That’s a perfect size for portability and easy storage.

4. Autel TS401 Maxi: TPMS Activation Tool

AUTEL-SCANNER-4

Yet another reliable entry-level scanning device from Autel. While the TS401 doesn’t read and clear codes, it pinpoints faults related to TPMS sensors.

As you might expect, the TPMS plays a huge role in on-road safety. Keeping it fault-free will go a long way in ensuring that you are safe. The Autel TS401 is a dedicated device for that.

Features
Vehicle coverage
This Autel scanner works on ALL vehicles that are TPMS-enabled. It covers domestic as well as Asian and European models.

Functionality
Autel TS401
Image Source
The device resets the TPMS and turns off its lights. Note that it is not a code reader. Meaning you can’t use it to read or clear TPMS codes.

That said, it diagnoses and reports TPMS faults. After the problem is fixed its status will change from “current’ to “historical”. And of course, the TPMS will continue to work normally.

As part of its diagnosis, this Autel scanner reads TPMS sensor ID, tire pressure, sensor battery condition and tire temperature. Additionally, it supports programming of OE sensors when you need to replace OEM sensors.

Connectivity
The Autel TS401 MaxiTPMS is a Windows-based diagnostic tool. It links with Windows XP and later versions, which allows you to update the device’s software.

Although this Autel scanner is not compatible with Mac, it really is a stand-alone device. You only need a PC when updating the software.

Interface
Perhaps one of the best things about the TS401 is its graphical display. You get a step-by-step guide on how to do TPMS diagnosis on the device’s color screen.

The total weight is a mere 3.31 pounds. Combined with dimensions of 15 x 3.5 x 11.4 inches, the light weight makes it one very compact and portable Autel scanner.

5. Autel MaxiSYS Elite Diagnostic ScanTool

AUTEL-SCANNER-5

Built with a quad-core, 1.8HGz NVIDIA Tegra processor, the Autel MaxiSYS is one very fast scan tool. It only takes 20 seconds to boot up and start scanning a vehicle for faults. And while that may be a big selling point, it’s not even the best thing about this Autel scanner.

Features
Vehicle coverage
It works on over 80 US, Asian and European made vehicle brands. Although it is primarily an OBD2 scanner, you can get OBD1 adapters as well. In short, this scan tool covers virtually all types of vehicles.

Functionality
Autel MaxiSYS Elite
Image Source
As a professional-grade scan tool, the MaxiSYS Elite supports all OBD2 functions. It can read/clear codes and run functional tests for all onboard vehicle systems. They include the ABS, brake system, emissions system, engine, fuel system, lights, SRS, and transmission just to name a few.

Beyond that, this Autel scanner also supports advanced diagnostic functions. You can use it for ECU coding, anti-theft matching, SAS reset, tire pressure reset, injector programming, throttle matching, and DPF reset among several other advanced functions.

Connectivity
With its Bluetooth module, you can connect it wirelessly to a car’s systems and run tests without cables constantly hindering your mobility. Additionally, the scanner features Wi-Fi for accessing the internet. Besides updating the software, internet access provides a ton of diagnostic and repair resources from online sources.

Interface
Its highly interactive menus are easily accessible thanks to the fitted 9.7-inch display unit. The whole gadget measures 25.6 x 7.5 x 16.9 inches and weighs 24.9 pounds.

6. Autel MaxiSYS MS906: OBD2 Automotive Diagnostic Scanner

AUTEL-SCANNER-6

The MaxiSYS MS906 is a massive upgrade from its predecessor, the MaxiDAS DS708. While the latter lacked some features like Wi-Fi, touchscreen, tablet design, immobilizer key programming and data logging, the MS906 has them all.

Features
Operating system
This scan tool runs on an Android operating system. Plus it is fitted with an A9, 1.40 GHz quad-core processor. That’s a lot more power than you will get in most other professional scan tools.

Vehicle coverage
The scan tool boasts extensive vehicle coverage of over 80 OBD2 domestic, Asian and European brands. There are special adapters for some car like

Chrysler
BMW
Benz
Nissan
Honda.

As far as diagnosis goes, the MS906 supports full OBD2 functions. It reads and clears codes, provides live data and covers all onboard systems. They include:

ABS, SRS
Brake system
Emissions system
Engine, fuel system, lights
Transmission and many more.
Additionally, this Autel scanner performs more specialized functions that involve adaptation and matching. Actually, it has a dedicated service section for an oil reset, EPB, SAS, DPF, BMS, ABS bleeding, TPMS, IMMO (programming of keys or anti-theft matching).

Connectivity
This scanner connects to the internet using Wi-Fi. That’s why it’s very simple to update. Alternatively, you can connect it to a PC using a USB cable (included). That way you’ll even be able to print diagnostic info.

Autel MaxiSYS MS906
Image Source
Interface
Navigating the MaxiSYS MS906 is pretty simple thanks to its 8-inch LED touchscreen. Also, it features a one-touch access to menus, which makes the whole device very intuitive.

The total weight is 22 pounds and the dimensions are 10 x 1.4 x 6.9 inches. In short, the scanner is well-sized for easy portability and storage.

7.Autel AL519 AutoLink: Enhanced OBD2 Scan Tool

AUTEL-SCANNER-7

This Autel scanner will help you determine whatever is triggering the Check Engine Light. It gives DTCs and also provides definitions for each. Additionally, the device has a huge library of troubleshooting tips for diagnosis and also repair.

Features
Vehicle coverage
Supports all the 10 OBD2 modes. That means the AL519 works on all vehicles manufactured in 1996 or later. Actually, it covers the US, European and Asian made vehicles.

Functionality
Autel AL519
Image Source
The Autel AL519 primarily turns off the Check Engine Light. It does so by reading and clearing generic, manufacturer-specific and pending engine codes. You can choose to either view the sensor data live or record it.

Besides that, this Autel scanner features the convenient one-click I/M readiness check. With just one push of a button, you can do a quick test of state emissions readiness, drive cycle verification and O2 sensor test.

Other than freeze frame data, the AL519 also displays vehicle information (VIN, CIN and CVN).

Connectivity
When you purchase this Autel scanner it comes with a USB cable for connecting the device to a PC. The connection not only allows for printing of diagnostics info but also makes it possible to update the scanner’s software.

Interface
Undoubtedly one of the most compact units from Autel, the AL519 measures a mere 7.83 x 4.11 x 1.48 inches and weighs just 2.05 pounds. Operating it is quite simple thanks to the interactive menus. You can access them via the color TFT screen (320 by 240 dpi).

The fitted LEDs and built-in speaker provide audio-visual notifications during I/M readiness tests.

8. Autel AutoLink AL319: One of best Autel Obd2 scanner

AUTEL-SCANNER-8

With plug-and-play capabilities, the AL319 doesn’t need a built-in battery. It gets its power straight from the car’s battery. Meaning the scanner will power up as soon as you connect it to your car. More importantly, it has very handy features that ordinary car owners and beginners can take advantage of.

Features
Autel AutoLink AL319
Image Source
Vehicle coverage
This Autel scanner works on all OBD2 vehicles; both domestic and local. So if your car is a 1996 or newer model then it is almost certainly compatible. That goes for US, European and Asian models.

Functionality
Simple as it is, the Autel AL319 is actually more powerful than you might think. The scanner reads and clear DTCs for most engine problems. Basically, you can use it to check for faults any time the Malfunction Indicator Light (MIL – or check engine light) comes on.

Perhaps, more importantly, is the fact that this Autel scanner provides text definitions of codes on its TFT screen. That’s a very handy feature for beginners who may not understand what each code means.

Besides that, it displays emissions status (I/M readiness), freeze frame data, reads live PCM and also retrieves vehicle information. Actually, there’s a dedicated key for quickly checking State Emissions. Just one click and the device will do I/M readiness check and drive cycle verification.

Autel AutoLink AL319
The AL319 is definitely not one of those fancy scan tools with Wi-Fi and Bluetooth. But it supports USB connection to a PC. That, in turn, makes it easy to update the scanner’s software and allow it to cover the latest car models.

Interface
Pretty much anybody can use this Autel scanner. Finding its menus is very easy thanks to the TFT color display installed.

The whole device only has two operation buttons for retrieving data codes and live data. One of the buttons is dedicated to all I/M readiness tests.

Additionally, the Autel AL319 has brightly colored LEDs that come on to show the I/M readiness status. There’s also a built-in speaker that produces audio notifications when the I/M status changes.

With dimensions of 4.61 x 2.83 x 0.71 inches, this Autel scanner is very compact. Also, it weighs just one pound, which makes it portable and easy to store.

9.Autel Maxisys Pro MS908P: Professional Automotive Diagnostic Tool

AUTEL-SCANNER-9

Autel Maxisys Pro MS908P is a smart diagnostic tool which is based on the intuitive and smart android operating system to provide powerfully and the fastest scanning capabilities.

Besides, Autel Maxisys Pro MS908P offers the best coverage of OE-level diagnostic. As a result, you can perform any diagnostic job imaginable within your shop.

Moreover, Autel Maxisys Pro MS908P offers smart technology for smart repairs.

What’s the importance of ECU coding and programming?

Well, if you need to update the software in your car to the most recent version then you must perform ECU coding and programming.

At the same time, these functions are critical in reprogramming data for some specific components after repairing or replacing parts of a vehicle.

The most comforting thing is that the programming functions can be performed reliably and safely with Autel Maxisys Pro MS908P.

Data logging is another interactive platform that allows you to connect with Autel technicians.

Then the technicians can help you with first-hand troubleshooting tips and ways to fix bugs and errors.

The other interactive platform is the notification center. This platform will allow you to access the latest additions or inform you when you need to perform software updates.

Data manager and update notification are the last two interactive platforms supported by Autel MaxisysPro MS908P.

10. AUTEL MaxiDAS DS808 KIT DS808K Tablet Diagnostic Tool Full Set Support Injector & Key Coding Update Online

AUTEL-SCANNER-10

AUTEL MaxiDAS DS808 full set VS MaxiDAS DS808:
The only difference: DS808 is full set, MaxiDAS DS808 is standard set. Please confirm by checking their packge list.
Same: same functions and same MUX specification

Autel Maxidas DS808 Support Customized Languages besides English and Spanish. If you need to change device languge, please send us serial number and your location first. And it will cost usd120.

We can support update onine,update cost is 400USD/year.

We can authorize other language like Korean,  Russian,  Portuguese, Italian, Dutch, Swedish, Japanese.

MaxiDAS DS808 (With Conkit) Features:
Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
Exceptional OE-Level system coverage for all electronic systems
Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, etc.
Smart AutoVIN technology for identifying vehicles easily
Automatic system and software updates with real-time push message notifications via Wi-Fi
Instant remote control tech support anytime, anywhere
Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes
Interactive Data Logging sessions enable direct contact with Autel Technical Support for first-hand troubleshooting of diagnostic bugs and errors
One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
Convenient data management system for managing internal program applications and reviewing data

Autel MaxiDAS DS808 diagnostics car manufacturers

Next-generation diagnostics Autel MaxiDAS DS808 Kit is a diagnostic diagnostic tool for more than 100 American, European and Asian automakers. The Autel MaxiDAS DS808 is a compact, intelligent software device that uses the Android 4.4.4 KitKat operating system, the Cortex-A9 processor (1.5GHz). The DS808 uses a 7-inch LCD touch screen with a resolution of 1024 × 600, as well as popular Android phones. Certainly the Autel DS808 is easy to access and use for car mechanics.

Configure the Autel DS808
7-inch touch screen, resolution 1024 x 600 LED Capacitive
OS: Android ? 4.4.4
CPU: Cortex-A9 processor (1.5 GHz)
Internal hard drive SSD: 32Gb
Wifi: 802.11b/g/n.
Connectivity: Mini USB 2.0; USB 2.0; WLAN; Micro SD Card (up to 32Gb)
Pin lithium-polymer 3.7V/3200 mAh
Diagnosed more than 100 American, European and Asian car brands
OE-level professional diagnostic function
Auto VIN function of the vehicle
Shop Manager data management functions
Online support through the MaxiFix Cloud system
Automatic system updates
Remote control function via TeamViewer
Dynamic design, shock resistance

Autel MaxiDAS DS808 diagnostics car manufacturers

30-1

Autel MaxiDAS DS808 diagnoses Chrysler, JEEP, Ford, Dodge, GM, Abarth, Alfa, Sprinter, Citroen, Dacia, Fiat, Jaguar, Lancia

30-2

Autel MaxiDAS DS808 diagnoses car manufacturers Land Rover, Opel, Peugeot, Porsche, Renault, Saab, Smart, Vauxhall, Volvo, Audi, Bentley, Bugatti, Lamborghini, Volkswagen, Seat
30-3

Autel MaxiDAS DS808 diagnoses car manufacturers Skoda, VW, VW, Benz, Maybach, BMW, MINI, Rolls-Royce, Daewoo, Acura, Honda, Hyundai, Infiniti, Isuzu, KIA

30-4

Autel Maxidas DS808 diagnoses manufacturers Lexus, Mazda, Mitsubishi, Nissan, Scion, SsangYong, Subaru, Toyota, Daihatsu, Mahindram, Perodua, Proton, Hyundai CV, Suzuki, TATA

How to Calibrate Mercedes Airmatic control unit by Autel DS708

How to troubleshoot a Mercedes-Benz S-Class that lowers itself when parked?

In some cases, the car will drop itself overnight but not always. If the vehicle is parked on an incline or downhill the raising or lowering may stop working. There are many reasons lead to this malfunction. Mercedes-Benz with airmatic suspension tries to level itself when parked and end up with lowering near to the ground. But the vehicle may try to level itself unsuccessfully when one level sensor is broken, or the rod is bent. This may cause your Mercedes-Benz self-level too high or too low.

24-0

What’s the Symptoms?

The following problems may occur on Mercedes-Benz E, C, CLK, GL, S-Class

-You hear air compressor engaging when parked.

-Air compressor releases air when parked.

-Car lowers overnight, not always.

-Mercedes lowers drops on rear or front.

-Mercedes raises itself when parked

Cause

When the car is parked the airmatic will try to level the car. It does this by discharging air from the airmatic suspension strut that is too high. Typically the MaxiDAS DS708 is leveled by lowering the one or two corners of the car that are too high. We also have seen cases when an incorrect installation of the level sensor caused the airmatic trying to level the car by increasing air pressure at certain strut, therefore, raising the car to the maximum setting.

The cause of this problem is usually one of the level sensors. Each of these sensors has two hall effect sensors inside.

B22/8 Left Front Level Sensor

B22/9 Right Front Level Sensor

B22/3 Rear Axle Level Sensor

The two front level sensors are located at the air suspension struts. In some models, you will only find one sensor at the rear axle. In this case, it measures the position of the torsion bar which provides an average vehicle height for both rear wheels. Mercedes – suspension – airmatic – strut

The level sensors measure the current height of the vehicle, and those reading are stored on the airmatic control unit.

24-1

How to solve Mercedes-Benz raises or lowers when parked?

The level sensors measure the current height of the vehicle, and those reading are stored on the airmatic control unit.

So, you need to do:

1.inspect the level sensors first

1)Inspect the front level sensors.
make sure there is no bending of the arm, no damaged of the wires. If you performed any suspension repair ensure that the level sensor at the front airmatic strut is not installed backward.

2)Inspect the level sensor at the rear torsion bar.
Ensure the connecting rod is not bent.

2.If the sensors do not have any physical damage, your next step is to carry a vehicle level calibration.

you can pay to do level calibration in a workshop, or you can perform it yourself if you have a scanner capable of performing airmatic troubleshooting. You will need a scanner that provides similar capabilities to Mercedes Star Diagnostic and allows you to scan multiple control systems in your Mercedes-Benz including programming, actuating and calibrating sensors.

Below is how to access the airmatic control unit and calibration using the Autel MaxiDAS DS708 diagnostic scanner.

Step1: Choose vehicle information

24-2 24-3

It is communicating…

Step2: Pneumatic tests

Choose special functions->Pneumatic tests-> AIRmatic compressor unit

24-4 24-5 24-6

Test sequence

24-7

Go back to choose AIRmatic pressure release valve

Click OK to continue

24-8

Test result

24-9

Done!

These can work with most Mercedes-Benz equipped with airmatic suspension such as:

CL Class: years 2000-2006 (W215 w/ ABC):years 2007-2012 (W216 w/ Airmatic)

CLS Class: years 2005-2011 (W219 w/ Airmatic):years 2005-2011 CLS55AMG &CLS63AMG

GL Class: years 2007-2012 (W164 w/ Airmatic)

ML Class: years 2005-2011 (W164 w/ Airmatic): years 2005-2010 (ML63AMG)

R Class: years 2006-2010 (W251)

S Class: years 1999-2006 (W220 w/,w/o 4matic): years 2000-2006 (W220 w/ABC)

years 2003-2006 (W220 w/ Airmatic & w/ 4matic),

years 2007-2012 (W221 w/ Airmatic, w/o 4matic):

years 2007-2012 (W221 w/ Airmatic, w/4matic)

4-5

(Report) AUTEL DS808 diagnose Honda Ridgeline

4-1
AUTEL MaxiDAS DS808 report for your checking:

Use MaxiDAS DS808 Kit to diagnose Honda Ridgeline, fully scan truck systems, read and clear all DTC codes quickly and OK!

How to do ? Check below steps.

4-2

AUTEL DS808 diagnose Honda Ridgeline 2006 steps:

Step 1: use the main cable to connect AUTEL DS808 with truck via the OBD2 port.

And you can see both the power indicator (left) and vehicle communication indicator (right) on.

4-3

Step 2: long press the LOCK/POWER button to turn on AUTEL DS808.

The main menu show as below, you click “Diagnostics” icon to start.

4-4

According to Honda brand, click the “Asia” tab to choose “Honda”.

4-5

Step 3: Click “Auto Detect” and DS808 will automatically show you this Honda Ridgeline VIN.

4-6

Click “OK” and you can also view vehicle info, click “Yes” to go on.

Model year: 2006

Model: RIDGELINE

VIN as above

4-7

Step 4: Choose vehicle region, in this case, it’s USA.

4-8

Choose “Diagnosis” and “Auto Scan” function.

4-10

Now AUTEL DS808 starts to scan full systems for Honda Ridgeline!

4-12

And you just need to wait the process complete 100%.

When it complete, DS808 will show you: which systems get wrong and how many faults it found.

Step 5: In this case, there are DTC codes exist in TPMS and Body Electrical modules:

Body Electrical DTC code: B1177

TPMS DTC codes: 11-1, 13-1, 17-1, 32-1, 37-1

4-12

Click the fault to read and clear DTC codes easily!

4-12

Now NO DTC exists in TPMS and Body Electrical modules anymore!

Know more details and info about this AUTEL DS808 tablet scanner from www.obd2tool.com?

4-1

How to update Autel DS808 software

Autel MaxiDAS DS808 based on the Android operating system, MaxiDAS DS808 is featured with an extensive coverage of OE-level diagnostics. Installed with a fast quad-core processor, DS808 offers maximum convenience and efficiency for your diagnosis and analysis. The intuitive user interface makes using the device effortless through a 7-inch LCD touchscreen that displays at 1024 x 600 quality.

Autel Maxidas DS808 auto diagnostic tool from www.obd2tool.com Can be a perfect replacement Maxidas DS708 pro,Autel Maxidas DS808 Autel scan tool Support one year free update,Maxidas DS808 supports Injector coding and key coding functions.

Autel Maxidas DS808 Autel DS808 scan tool Support one year free update

Based on the Android operating system, MaxiDAS DS808 is the update version of Autel DS708 which is featured with an extensive coverage of OE-level diagnostics. Installed with a fast quad-core processor, DS808 offers maximum convenience and efficiency for your diagnosis and analysis

Autel MaxiDAS DS808 Scanner Feature and Screen Display

4-1 Autel-DS808-software 4-2 Autel-DS808-software-2

How to update Autel DS808 software

1. Make sure the Display Tablet is connected to a power source with stable access to the internet.

2. Tap the Update application button from the MaxiDAS Job Menu;
or tap the update notification message when received one;
or tap the Update icon on Vehicle Menu in Diagnostics application.
The Update application screen displays.

3. Check all available updates:
If you decide to update all the items, tap the Update All button.
If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).

4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume
from the break point.

5. When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

1. Autel Scan Tool Maxidas DS808 is standard set, if you want full set, please choose Autel Maxidas DS808 Kit
2. Autel Maxidas DS808 Now Support Customized Languages besides English. If you need to change device languge, please send us serial number and your location first. And it will cost usd120.
We can authorize other language like Korean, Russian, Portuguese, Italian, Dutch & Swedish

Autel MaxiDAS DS808K Analysis Diagnostic Scan Tool Support Injector & Key Coding

AUTEL MaxiDAS DS808K full set VS MaxiDAS DS808:

Difference: DS808K is Full Set, MaxiDAS DS808 is standard set. Please confirm by checking their packge list.

Language : English

Vehicle coverage

1. European vehicle list:
For AUDI, For BENZ, For BMW, For DACIA, For EU FORD
For LANDR OVER,For MINI, For OPEL, For PEUGEOT
For RENAULT, For SEAT, For SKODA, For VW,For VOLVO
For SMART, For JAGUAR, For BENZ SPRINTER, For SAAB,For FIAT
For ABARTH, For LACIA, For ALFA ROMEO, For VAUXHALL
For MAYBACH, For BENTLEY, For BUGATTI,For PORSCHE

2. USA vehicle vist:
For G/M, For CHRYSLER, For FORD

3. Asia vehicle list:
For SUZUKI, For KIA, For DAWEOO, For ISUZU, For TOYOTA, For SU/BARU,
For SCION, For NISSAN, ForMITSUBISHI, For LEXUS, For INFINITI,
For HYUNDAI, For HOLDEN, For HONDA, For ACCURA, For MAZDA.

Supported Automotive Protocols:
ISO9141-2,ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850

PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,
fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda
Diag-H Protocol, TP2.0, TP1.6

MaxiDAS DS808K (With Conkit) Features:
1.Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
2.Exceptional OE-Level system coverage for all electronic systems
3.Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, etc.
4.Smart AutoVIN technology for identifying vehicles easily
5.Automatic system and software updates with real-time push message notifications via Wi-Fi
6.Instant remote control tech support anytime, anywhere
7.Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes
8.Interactive Data Logging sessions enable direct contact with Autel Technical Support for first-hand troubleshooting of diagnostic bugs and errors
9.One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
10.Convenient data management system for managing internal program applications and reviewing data

Note: There are two options available when accessing the Diagnosis section:

1. Auto Scan – starts auto scanning for all the available systems on the vehicle.
2. Control Units – displays a selection menu of all available control units of the test vehicle.

After a section is selected and the tablet establishes communication with the vehicle, the corresponding function menu or selection menu displays.

How to update Autel Scan Tool Autel DS808K (With Conkit) software:

1. Make sure the Display Tablet is connected to a power source with stable access to the internet.

2. Tap the Update application button from the MaxiDAS Job Menu;
or tap the update notification message when received one;
or tap the Update icon on Vehicle Menu in Diagnostics application.
The Update application screen displays.

3. Check all available updates:
If you decide to update all the items, tap the Update All button.
If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).

4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume
from the break point.

5. When the updating process is completed, the firmware will be installed automatically. The previous version will be replaced.

MaxiDAS DS808K (With Conkit) Specifications:
Operating System:Android? 4.4.4
Processor:Cortex-A9 processor (1.5 GHz)
Memory :32GB
Display:7-inch LCD capacitive touchscreen with 1024×600 resolution
Connectivity:? Mini USB 2.0 ? USB 2.0 ? Wi-Fi ? Micro SD card (supports up to 32GB)
Sensors:Ambient light sensor for brightness auto changing
Audio Input/Output:? Input: N/A ? Output: buzzer
Power and Battery:? 3.7 V/3200 mAh lithium-polymer battery ? Charges via 5 VDC power supply
Tested Battery Life:Around 4.5 hours of continuous use
Battery Charging Input:5 V/1.5 A
Power Consumption:500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp:-10 to 60°C(14 to 140°F)
Storage Temp:-20 to 70°C (-4 to 158°F)
Operating Humidity:5% – 95% non-condensing
Dimensions (W x H x D):237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”)
Net Weight:788 g (2.42 lb.)

Package Includes:
1pc x USB External
1pc x Power Adapter
1pc x USB External Power AdapterUser
1pc x ManualQuick reference guide
1pc x Main cableCarry case
1pc x Mini USB Cable
1pc x User Manual
1pc x Quick Guide
1pc x Benz-14
1pc x Chrysler-16
1pc x BMW-20
1pc x Kia-20
1pc x Nissan-14
1pc x GM/Daewoo-12
1pc x Honda-3
1pc x VW/AUDI-2+2
1pc x Mitsubishi/Hyundai-12+16
1pc x Benz-38
1pc x PSA-2
1pc x Fiat-3

Autel Maxidas DS808 full kit fit small repair shop

Autel Maxidas DS808 full kit fit small repair shop – affordable price and good performance

I have the first generation Autel Maxidas DS708 for many years, I love it because of its reasonable price and cost efficient function, but what a pity that it will not be updated any more.

Then you consider to have one Autel MaxiDAS DS808K full kit which adds extra special functions i.e injector coding, key coding, adaptation, ECU information, trouble codes, freeze frame, live data, active test and special functions. I have one small repair shop and have many different car brands fix, DS808 can fully meet my requirements.

It has many different vehicles’ diagnostic adapters which are not standard 16pin(see following pic). Maxidas DS808 is compatible to many US, European, Asian vehicles, user friendly and has software for different vehicle models and systems.

16-1
16-2
Its new CPU and LCD touch screen (7″ LCD 1024×600 resolution touch scrren), dramatically improved the entire users’experience, much more smooth comparing with DS708. Personally, I would recommend DS808 for those small shops with limit budgets. Of course, if money is not a problem, Maxisys Elite may be your good choice.It is smaller than ms906, so very handy.
16-3

This is what I got Autel Maxidas DS808 full kit

www.obd2tool.com claims they are the exclusive sales dealer authorized by auteltech. Means lowest price $845 free shipping.

BTW, I am not affiliate with this shop, but a customer.

Next is my Autel Maxidas DS808 tests report:

Program new keys ………Yes

Program the abs module ……..NO (maxisys pro yes)

AutoVIN Technology……….Yes

MaxiFix Cloud-Based Information System ……..yes

Shop Manager ………..yes

Injector coding …….yes

Key coding ……….yes

Many special function works: Oil Reset Service, TPMS Programming Service, EPB Service, ABS/SRS Services, SAS Calibration Service, DPF Regeneration Service

16-4 16-5 16-6 16-7 16-8

Register Autel Maxidas DS808:

Registering the device was easy. I simply go to autel’s website and set up an account. Once I do that I take the registration code/passcode from the scan tool and register it on the website. I  then make sure that the scan tool is hooked up to my wifi which is setup in settings. Then I am ready to update the scan tool with the latest software.

Update Autel Maxidas DS808:

Make sure the Display Tablet is connected to a power source with stable access to the internet.

Tap the Update application button from the MaxiDAS Job Menu;or tap the update notification message when received one; or tap the Update icon on Vehicle Menu in Diagnostics application.

The Update application screen displays.

Check all available updates:

If you decide to update all the items, tap the Update All button.

If you only want to update one or some of the item(s), tap the Update button on the right column of the specific item(s).

Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.

When the updating process is completed, the firmware will be installed automatically. The Professional Diagnostic Tool will be replaced.

16-9

Autel MaxiSYS MS906,Autel DS808 which to buy?

As known , this is Autel Maxidas revolution course:

Autel Ds708 scanner -> Autel MaxiSYS MS906-> Autel DS808 standard package-> Autel DS808K full package

Autel MaxiDAS DS808 Injector coding, key coding works

Topic: Autel MaxiDAS DS708 revolution, AUTEL MaxiDAS DS808 Kit nice progress, who is the verified seller, comparison table, package compare, etc.

3-1

Autel Ds708 revolution:

Autel Ds708 scanner -> Autel MaxiSYS MS906-> Autel DS808 standard package-> Autel MaxiDAS DS808K full package

3-2

Autel DS808 nice progress:

1.Personalize customization: optional with AUTEL DS808 standard package and Autel DS808 full package
2.Advanced Function: Scanner -> Autel DS808 injector coding, key coding works
3.Advanced Mux specification.
4.MUX is designed smaller and compact, and easy to take.
5.Support current popular communication method: WIFI and Bluetooth.

Who is the verified seller?

Autel Scan Tool DS808 full package price: $795, 3-5 working days delivery by DHL (this one is much more cost-effective)

Autel DS808 standard package price: $828 3-5 working days delivery by DHL

Autel DS808 standard package compare Autel DS808K full package

The only difference: DS808K is full set, MaxiDAS DS808 is standard set. Please confirm by checking their packge list.
Same: same functions and same MUX specification

Basic information comparison table among Autel Ds708 scanner, Autel MaxiSYS MS906, Autel DS808 standard package and Autel DS808 full package

Autel DS808 Users’ talk:

1.I think DS708 is the first generation of iconic device for Autel, because of its reasonable price and cost efficient function. I owned one DS708 for many years, but regret that it will not be updated any more. So I intended to add its new extended version- DS808 for my small repair shop, which can fully meet my requirements. Its new CPU and LCD touch screen, dramatically improved the entire users’ experience, much more smooth comparing with DS708. Personally, I would recommend this tool for those small shops with limit budgets. Of course, if money is not a problem, Maxisys Elite may be your good choice.

2.Actually I’m self-maintainer not a shop guy, I already have Diaglink but need more professional device, which can help me do some features as adaptation or Matching & lots of things. I do like MS908P but expensive, so I’m buying DS808, affordable price and good performance.

3.Compatible to my cars,it seems it is compatible to many US, European’Asian vehicles ,user friendly and has software for different vehicle models and systems. Very handy and has different adapters for the car models, I will use the equipment to scan and diagnose. Would recommend this product. Worth the money! And Motorzone send me a free headset.Sounds good.

Autel DS808 frequently-asked questions and answers:

Question: Can you use this to program new keys?

Answer: Yes you can reprogram keys with this tester

Question: can you program the abs module with this?

Answer: DS808 cannot program the abs module. Only maxisys pro can do it.

Question: Is it difficult to register this device? And can it support Spanish?

Answer: Registering the device was easy. You simply go to autel’s website and set up an account. Once you do that you take the registration code/passcode from the scan tool and register it on the website. You then make sure that the scan tool is hooked up to your wifi which is setup in settings. Then you are ready to update the scan tool with the latest software.

Changing the language settings is also easy. You simply do that in settings as well and have multiple different choices. I do know Spanish was one of them. I returned mine because it could not code or reset any adaptaions in any modules on my vehicles. My vehicles are about 15 years old and I think the support on older vehicles goes away with the updates. It probably has more capabilities on the newer vehicles. I should have purchased one of these 5 years ago and never updated it so that the scan tool could retain its capabilities.

Question: What is the head set used for with the scantool

Answer: It’s not used with the tool is just a free give away to get you to buy an outdated tool that according to autel there will be no more updates after Dec 2017. I sent it back because I couldn’t get it to update or more like it removed software during update which is another common complaint on their site. I feel it’s dishonest to sell things claiming a year full updates and it’s not a year is much less than a year but I guess China isn’t afraid of a class action for fraud.

www.obd2tool.com