Introduction to Autel MaxiSys Pro MS908P Diagnostic techniques

29-1

Autel Maxisys Pro MS908P is potent a diagnosis plus research technique pertaining to vehicles. Autel MaxiSys Pro MS908 analysis technique can be incredibly populor in auto a diagnosis current market, when Autel MS908P will offer lots of the important attributes belonging to the MaxiDAS DS708 with intense ease of make use of plus potent analysis functionality.

Autel MaxiSys Pro MS908 Autel MS908P Auto Analysis Technique

MaxiSys? Analysis Program is definitely an evolutionary sensible solution pertaining to customized Auto diaggnosis plus ECU programming. Exactly why point out consequently? Is Autel MaxiSys Pro MS908 equiped with a bunch of special attributes? Yes, you can get these under:

Autel ms908 attributes a great very quickly A9 quad-core pick, your 32G reliable point out hard disk including a very delicate hunting for. 7’’LED capacitive touch display.

Maxisyspro ms908 Displaying the latest AutoVIN technological innovation to identify CAN EASILY vehicles of hospitality attire touch, plus joined with the particular exceptional AutoScan purpose, the particular MaxiSys is the many bright technique in the industry.

The particular MaxiSys attributes sophisticated dual-band(2. 4GHz plus 5GHz)802. 11n Wi-Fi that’s up to twice when quickly when every previous-generation analysis models. The particular MaxiSys Auto Communication Interface(VCI) attaches by means of reputable Long-Range Class 1 Buletooth towards the intended for capsule.

ECU Coding plus Programming

The particular Coding purpose is employed that will configure the particular auto manipulate modules(ECUs) with extra ranges, while Programming is employed that will reflash the particular auto ECUs. Most of these performs permit you to revise laptop application about the auto towards the newest variant, together with that will reprogram adaptive information for certain parts right after doing fixes or maybe substitutes. MaxiSys is among the almost no analysis models on this planet with the ability involving preforming harmless plus reliable coding plus display programming with affordable expenses.

J2534 Reprogramming Ability

The particular VCI pertaining to Autel Scanner MaxiSys PRO is usually a SAE J2534-1 &-2 Compliant Programming Program. With all the kept up to date OEM application, It is able of exchanging the earlier software/firmware in electronic manipulate units(ECUs), programming innovative ECUs plus fixing software-controlled driveability concerns plus emission concerns.

Absolutely compatible with equally SAE J2534-1 plus J2534-2 reprogramming specifications, Performs the conventional Passthru J2534 functionality.

Quickly functionality ensures fast reprogramming involving also the particular newest controllers.

This kind of article is embraced by way of ADK automotive analysis provider, when you’ve got every tips concerning autel maxisys ms908, make sure you give people concept or maybe check out each of our most important web-site to contact people.

MS908P VCI – J2534 ECU Programming Device

25-1  25-4

1.Functional Description

1.  Ethernet Port

2.  USB Port

3.  Power LED – illuminates solid green when powered on

4.  Error LED – illuminates solid red when serious hardware failure occurs

5.  Bluetooth LED – illuminates solid green when connected with the MaxiSys display tablet through Bluetooth communication

6.  Ethernet LED – illuminates solid green when connected with the Autel Scan Tool MaxiSys display tablet or an existing LAN via the Ethernet serial cable

7.  USB Status Light — illuminates solid green when the device is properly connected and communicating with the MaxiSys display tablet or the PC via the USB cable

8.  Vehicle LED – flashes green when communicating with the vehicle’s network

IMPORTANT: Do not disconnect the reprogramming device while this status light is on! If the flash reprogramming procedure is interrupted while the vehicle’s ECU is blank or only partially programmed, the module may be unrecoverable.

9.  Bluetooth Antenna

10. DC Power Supply Input Port

11. Vehicle Data Connector (DB26-Pin MVCI)

12. External Programming Voltage Output Port

13. A/D Input Port

J2534 Reprogramming Capability

The J2534 ECU Programming Device is a SAE J2534-1 & -2 compliant PassThru reprogramming interface device. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs and fixing software-controlled drivability issues and emission issues.

Communication

The J2534 ECU programming device supports Bluetooth, Ethernet and USB communication. It can transmit vehicle data to the MaxiSys display tablet with or without a physical connection. The working range of the transmitter through Bluetooth communication is 755 feet (about 230 m). A signal lost due to moving out of range automatically restores itself when the display tablet unit is brought closer to the VCI unit.

Power Sources

The J2534 programming device can receive power from both of the following

Sources:

Vehicle Power
AC/DC Power Supply

Vehicle Power

The J2534 programming device operates on 12-volt vehicle power, which it receives through the vehicle data connection port. The MS908P powers on whenever it is connected to an OBD II/EOBD compliant data link connector (DLC). For non OBD II/EOBD compliant vehicles, the device can be powered from a cigarette lighter or other suitable power port on the test vehicle using the auxiliary power cable.

AC/DC Power Supply

The J2534 programming device can be powered from a wall socket using the AC/DC power adapter.

Technical Specifications

25-3