MS908P VCI – J2534 ECU Programming Device

25-1  25-4

1.Functional Description

1.  Ethernet Port

2.  USB Port

3.  Power LED – illuminates solid green when powered on

4.  Error LED – illuminates solid red when serious hardware failure occurs

5.  Bluetooth LED – illuminates solid green when connected with the MaxiSys display tablet through Bluetooth communication

6.  Ethernet LED – illuminates solid green when connected with the Autel Scan Tool MaxiSys display tablet or an existing LAN via the Ethernet serial cable

7.  USB Status Light — illuminates solid green when the device is properly connected and communicating with the MaxiSys display tablet or the PC via the USB cable

8.  Vehicle LED – flashes green when communicating with the vehicle’s network

IMPORTANT: Do not disconnect the reprogramming device while this status light is on! If the flash reprogramming procedure is interrupted while the vehicle’s ECU is blank or only partially programmed, the module may be unrecoverable.

9.  Bluetooth Antenna

10. DC Power Supply Input Port

11. Vehicle Data Connector (DB26-Pin MVCI)

12. External Programming Voltage Output Port

13. A/D Input Port

J2534 Reprogramming Capability

The J2534 ECU Programming Device is a SAE J2534-1 & -2 compliant PassThru reprogramming interface device. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs and fixing software-controlled drivability issues and emission issues.

Communication

The J2534 ECU programming device supports Bluetooth, Ethernet and USB communication. It can transmit vehicle data to the MaxiSys display tablet with or without a physical connection. The working range of the transmitter through Bluetooth communication is 755 feet (about 230 m). A signal lost due to moving out of range automatically restores itself when the display tablet unit is brought closer to the VCI unit.

Power Sources

The J2534 programming device can receive power from both of the following

Sources:

Vehicle Power
AC/DC Power Supply

Vehicle Power

The J2534 programming device operates on 12-volt vehicle power, which it receives through the vehicle data connection port. The MS908P powers on whenever it is connected to an OBD II/EOBD compliant data link connector (DLC). For non OBD II/EOBD compliant vehicles, the device can be powered from a cigarette lighter or other suitable power port on the test vehicle using the auxiliary power cable.

AC/DC Power Supply

The J2534 programming device can be powered from a wall socket using the AC/DC power adapter.

Technical Specifications

25-3

Why Autel MaxiSys Pro MS908P?

24-1  24-3
Autel MaxiSys Pro MS908P: Shortcomings

1.The MS908PRO is not suitable for the low-end mechanics as the operational procedures are quite complicated. It mainly targets professionals in Auto-repairing and Garage Shops.

2.It is a high end product and is not affordable to everyone who would want to use.

Why Autel MaxiSys Pro MS908P?

1. Its quad-core processor, the Cortex-A9 Samsung Exynos 1.4 GHz, provides high processing speeds.

2. The compatibility of the device with other add-ons makes it possible to install a language pack.

3. The scanned data is presented as texts and/or graphs.

4. The device is compatible with a large number of vehicles.

5. Android Ice Cream 4.0 on which it runs enables multitasking and quick boot up. Almost 5 times faster than other diagnostic devices.

6. It is light, compact and robust. Therefore, you can carry and work with it anywhere without much hassle.

7. You can share data via Bluetooth and Wi-Fi with other people in your team or print for hard copies.

It’s one of the best Professional Autel Scanners!!

24-2

Does Autel Maxisys Pro Suit You?

This diagnostic device is mainly for professionals, those with Garage or Auto Repairing Shops.

It wouldn’t suit you if you are a single car owner. The design is meant to serve many people.

If you are an owner of a garage or car shop Autel Professional OBD2 MS908P, it could be of great help to you in getting things done fast.

24-4

Is It Worth Buying Then?

Autel MS908P is an all round and powerful tool that I would definitely recommend to any professional mechanics in the auto-repairing business.

It can a long way in easing up and increasing efficiency in your engine diagnostics from all the features mentioned. The returns are a guarantee.

It is a current tool that is compatible with most vehicles models. With its ‘Future Proof’ feature, it is to remain relevant with new vehicle models being released.

Autel are very good with after-sale services and you are assured of getting updates every time they are done.
So, you’ve got what you need about Autel Diagnostic Maxisys Pro MS908P.
Take one for your professional business!!

Autel Maxisys Pro MS908P Vehicle Diagnostics Scanner ECU Coding and J2534 Programming

19-1

The Autel Maxisys Pro MS908P Diagnostic Scanner utilizes an ultra-powerful A9 quad-core, 1.40GHz processor that offers a 50% increase
in speed versus competing products,a 9.7 LED screen with a 1,024 x 768 resolution capacitive touch screen, a 32 GB Solid State
hard drive,the revolutionary multitasking Android Operating System and comprehensive OE-level vehicle coverage

19-2

The Advanced Automotive Diagnostic Tool includes the J-2534 reprogramming box and special MaxiSYS Pro software needed for shops
and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks.
It comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian & European vehicles (J-2534 manufacturer
updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.

* Free 1 year software update via internet on autel official website
* 9.7 LED screen with a resolution of 1,024 x 768 capacitive touch screen
* Utilizing an A9 quad-core 1.40GHz processor that offers 50% increase in speed versus competing products
* Support WIFI: Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
* Support Bluetooth: The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth
* Vehicle Coverage: Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes

Please Pay Attention : There is no chang′an 3 connector in Autel Scanner Maxisys pro Box. And benz-14 pin connector is only for the European version.

2017 New Release Original Autel MaxiSYS Elite Automotive Diagnostic Reviews

The Maxisys Elite, the newest addition to the MaxiSys line of highly advanced smart diagnostic tools, is based on the fast and intuitive Android 4.4 operating system. Powered by NVIDIA’s Tegra? 4, the world’s fastest mobile processor, its visually stunning 9.7” Retina display offers ultra-high resolutions up to 2048×1536 and an optimized array of sophisticated and powerful applications. The MaxiSys Elite rapidly performs every job from comprehensive vehicle diagnostics & analysis to advanced ECU programming. 2x faster than any comparable device, the MaxiSys Elite provides extended battery life and intelligent power saving. The MaxiSys Elite offers a super-sensitive capacitive screen able to respond to gloved, moistened, and even greasy fingers! The ergonomically angled docking station provides optimum visibility and convenient charging that eliminates power concerns.

29-1

Following is the reviews of MaxiSys Elite.

Review 1.
I had a 3 years experience of using autel maxisys series products in my workshop, including maxisys pro, maxisys mini, and maxisys maxidas ds708, but this one still does not disappoint me. It only takes 15 seconds to boot up, the touch screen is very smooth, the diagnosic process is very fast, helps me save a lot of time.

Review 2.
EXTREMELY Nice! Fast Shipping! Very nice easy to work with Seller! As for the Product….
Easy to use and operate the Maxisys Elite is the best scan tool on the market today. I personally own Launch, Bosch, and Snap On. While they all have their pros and cons I believe the Autel Elite to be the best all around tool, and with two years of free update is certainly the best value for the money.

Review 3.
Although the tool is expensive,it could do a lot of doignosis,it worth the price.
good quality and worth price
Read DTCs, Clear DTCs, Read Datastream, Maintenance Recommendations, Special Repair Functions.These functions saves me many money.GOOD PRODUCT.

Review 4.
This product is expensive for me.I even doubt that if it worth to buy.And the truth is I did a good choice.There are three things I want to say about this product.The first is the design of it.the touch feels good,(I don’t know the material about it).legible screen also a good side I like.It also can be put up,so I can put it on the car instead of carring it and walking around.Maybe it shows I am a lazybones….uhhhhhhh….
The other side,about the functions,programming working works really good on my Benz,the update keeps the softeware can be follow development of the car’s system.The advice from cloud data,all of them are from technicals or drivers,gives me some thinking when I have met problems about my car.I just told my favourite functions now,all of the functions I can not write it down here…
last thing I want to say.The service.This product has many functions,so sometimes I don’t know what can I do or what the benefits that one of the functions has.These problems just a part of all the problem I met.(I am not good at use precision electronic tools).So I have called the seller many times.With the good manner and speed,they solved all of my problems.Have bought products from Obd2tool.com these years,but the seller who shows good manners and solves the problem carefully like this,I rarely met.
all of the things I got from this shop,(product,service,and etc.)is a good experience for me.I write some words about the experience of this product,even though these things are my opinions,but wish there will be some helps for yours,if you want buy a good car test product for cars you owned.

Autel Maxisys Pro MS908P Smart Vehicle Diagnostics and ECU Programming System with Bluetooth Wireless Android Diagnostic Scanner Maxisys

9-1

Autel MaxiSYS Pro Car Diagnostic / ECU Programming Tool

Designed with the DNA of Autel’s diagnostics family, the MS908 PRO is built to offer many of the prestigious qualities of the MaxiDAS DS708 with extreme ease of use and powerful diagnostic performance. However the MaxiSys has evolved far beyond the original capabilities. Utilizing an A9 quad-core 1.40GHz processor that offers 50% increase in speed versus competing products, a 9.7″ LED screen with a resolution of 1,024 x 768 capacitive touch screen, the revolutionary multitask-capable Android Operating System, combined with the best possible coverage of OE-level diagnostics, the MaxiSys is the perfect diagnostic solution for shops and technicians who demand unrivalled smart technology and smart repairs.

9-2

Hardware

Extraordinarily powerful Cortex-A9 quad-core processor
9.7″ 1,024×768 LED-backlit glossy Multi Touch capacitive display with IPS technology
Internal reliable and fast 32GB Solid State Drive for better performance
Built-in 5-megapixel rear camera with autofocus and flashlight
Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
Unique shop tough ergonomic design features strong rubber protection and housing;
Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
USB, audio and auxiliary ports make it easy to connect accessories
The VCI connects to the main unit wirelessly with up to 230 meters working range

9-3

Software

Open source Android Operating System for fast boot-up and multitasking
Easy and intuitive navigation makes finding what you need simple and fast
Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
Complete capabilities for codes, live data, actuation tests, adaptations, coding and ECU programming
Displays live data in text, graph, analog and digital gauge for easy data review and analysis
Configures display options, sets triggers, records and playbacks results with one touch
Records and playbacks live data to pinpoint troubles of sensors and components
Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
Remote technical support for convenient demonstration, training and increased customer satisfaction
Prints out recorded data anytime and anywhere with Wi-Fi technology
Automatic Wi-Fi updates available in new software releases

9-4

Product Details

1.Unrivalled Speed

9-6

MaxiSys is the fastest scanner ever in the market. It features an extraordinarily fast A9 quad-core processor, a 32G solid state hard drive and a highly sensitive 9.7”LED capacitive touch screen. The revolutionary open source Android Opearting System allows you perform multiple tasks easily and intuitively. The system boots up in only 20 seconds, which is 5 times faster than competion products, and the diagnostic time for some vehicles is greatly reduced, allowing you to perform your job much quicker

2.Smart Technology
9-7

Featuring the latest AutoVIN technology to identify CAN vehicles in one touch, and combined with the exclusive AutoScan function, the MaxiSys is the most intelligent system in the industry. These Autel Tool functions allow the technicians to easily detect vehicles, scan all the diagnosable ECUs on every vehicle and run diagnostics on selected systems. Another advanced feature, the industry first colud-based online community, puts you in touch with the latest tips and expertise from technicians around the world.

3.Ultrafast Wireless

9-8

The MaxiSys features advanced dual-band(2.4GHz and 5GHz)802.11n Wi-Fi that’s up to twice as fast as any previous-generation diagnostic systems. The MaxiSys Vehicle Communication Interface(VCI) connects via dependable Long-Range Class 1 Buletooth to the host tablet. Once the wireless VCI is connected to the car, the technician is completely free to move around anywhere in the shop. Its wireless connectivity also means you can field updates to the latest software releases, allowing for update anywhere and anytime.

4.Exceptional OE-Level Coverage

9-9

As the fastest growing diagnostic company in the world,Autel has been committed to providing the best and easiest-to-use diagnostic solution with the most extensive coverage of all systems for all the major vehicle manufacturers. This enables independent garages to confidently provide comprehensive servicing in their own workshops without relying on dealer availability. Continual software enhancement will provide additional vehicle coverage.

5.ECU Coding and Programming

9-10

The Coding function is used to configure the vehicle control modules(ECUs) with extra parameters, while Programming is used to reflash the vehicle ECUs. These functions allow you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements. MaxiSys is one of the very few diagnostic systems in the world with the capability of preforming safe and reliable coding and flash programming with affordable costs.

6.J2534 Reprogramming Capability

9-11

The VCI for MaxiSys PRO is a SAE J2534-1 &-2 Compliant Programming Interface. Using the updated OEM software, It is capable of replacing the existing software/firmware in electronic control units(ECUs), programming new ECUs and fixing software-controlled driveability issues and emission issues.

Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards
Performs the standard Passthru J2534 functionality
Fast performance ensures quick reprogramming of even the newest controllers
Requirements: Both a pc and OEM Data subscription are required. Neither is included in this kit.

7.Instant Software Updates

9-12

To keep up with the continuing development of vehicle manufacturers, continuous software improvement is essential for any diagnostic system. MaxiSys was designed with this in mind. Whenever any unknown new vehicle model or a diagnostic error is reported, usually within 48 hours, custom software updates will be made available for the user to download.

8.Remote Technical Support

9-13

The remote technical support function enables Autel technical support personel to access the tool from a remote location. The method significantly reduces the call time, leading to faster problem resolution and increased customer satisfaction.

9-14

DIAGOSTIC SYSTEM COMPARISON

9-15

KIT Includes

9-16

Specifications

9-17

Gallery

9-18 9-19

Autel Maxisys MS908P With 2 Years Free Online Update With Promotion Price!

Autel Maxisys Pro MS908P is definitely an evolutionary sensible solution pertaining to customized motor a diagnosis plus ECU programming. Made from the particular DNA involving Autel’s diagnostics household, the particular MaxiSys is built to give lots of the important attributes belonging to the Autel MaxiDAS DS708 with intense ease of make use of plus potent analysis functionality. Autel MS908 Pro contain the Autel Maxisys MS906 and Autel MS908 Functions.

As a result of it’s Open Origin Google android Main system, this kind of analysis program is multitasking plus has quickly boot-up. The particular program has straightforward plus user-friendly course-plotting and also this makes it straightforward plus quickly in checking out the motor car. Them demonstrates are living information available as texts plus graphs that make car checking out research less difficult for you. It may history the particular are living information allowing it to playback the particular recorded information. The particular program means that you can sign up for the particular screen-print belonging to the a diagnosis results when plus everywhere.

Auto Diagnostic Scanner Autel Maxisys PRo now we only support for English and Spanish Language and we can offer your two years free update online,

one year online update value about 1000USD.And you can’t find out this autel ms908P with this good price.

if you want to know more functions and details about the autel ms908 pro , you can contact with us:sales@obd2tool.com

How to Delete Software of AUTEL MaxiSYS Pro MS908P

WIFI AUTEL MaxiSYS Pro MS908P is with complete capabilities for codes, live data, actuation tests, adaptations, coding and ECU programming.And sometimes,some of car software in the device can not use correctly,you may need to delete the software and download the car software again to Autel Maxisys Pro.

New Autel Maxisys Pro MS908P Diagnostic System with WiFi Free Shipping

24-1

How to Delete Software of AUTEL MaxiSYS Pro MS908P?

1.Start the machine,and click Data Manager.

24-2

2.Click Apps.

24-3

3.Then it will display the car software in the device.

24-4

4.Choose the car software you need to delete.

24-5

5.Click the delete button to remove.

24-6

How to update Autel MaxiSys Pro MS908P software and firmware

The original Autel MaxiSys Pro MS908P automotive diagnostic system has been designed to be the go-to tool for the professional technician who performs J-2534 reprogramming on a regular basis. Following are the firmware and software update instructions of Maxisys MS908P provided.

8-1

Update MaxiSys Firmware

The internal programming of the MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database.

The display device automatically searches for available updates for all of the Maxisys components when it is connected to the internet. Any Updates that are found can be downloaded and installed on the Autel Pro MS908P scanner. This section describes installing an update to the Autel MaxiSys pro 908 Diagnostic System firmware. A notification message displays if an update is available when the Notifications function is enabled in the Settings applications.

Sample update screen
8-2

1.Navigation and Controls

Home Button-returns to the MaxiSys Job Menu

Update All-updates all available updates

Search Bar-search specific update item by inputting the file name, for example, a vehicle make

2.Status Bar

Left Side-displays the MaxiSys device model information and serial number

Right Side-displays an update progress bar indicating the completion status

3.Main Section

Left Column-displays vehicle logos and update firmware version information; tab the About button displays a function list in PDF showing more details about the firmware.

Middle Column-displays a brief introduction about the new changes to the firmware operation or capabilities. Tap

8-3

button to open an information screen to view more details, and tap the dim area around to close the window.

Right Column-according to the operation status of each firmware item, the button displays differently.

1.Tap Update to update the selected item
2.Tap Pause to suspend the updating procedure.
3.Tap Continue to go on updating the suspended update

To update Autel MS908P firmware

1.Power up the MaxiSys pro tablet, and ensure that it is connected to a power source and with steady internet connection

2.Tap the MaxiSys MS908P Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays.

3.Check all available updates:
If you decide to update all the items, tap the Update All button
If you want to update some individual items, tap the Update button on the right column of the specific item.

4.Tap the Pause button to suspend the updating process. When you tape Continue to renew the update, the updating process will resume from the break point.

5.When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if thee is one.

VCI Manager Operations

This application allows you to pair up the MaxiSys Display Tablet with the Bluetooth VCI device-the Wireless Diagnostic Interface, and to check the communication status.

VCI Manager screen
8-4

1.Connection Mode- there are two connection modes available for selection. The connection state is displayed alongside.

2.BT Paring-when paired to a wireless device, the connection state displays as Paired; otherwise it displays as Unpaired.
Update(for VCI software only)-Update VCI software via internet through the MaxiSys tablet networking using USB connection.

3.BT Setting
The BT Setting screen displays the type and a partial serial number for all of the device available for pairing. Tap a required device to start paring. The BT status icon displayed to the left of the device name indicates the received signal strength.

4.BT Paring
The VCI module needs to be either connected to a vehicle or to an available power source, so that it is powered up during the synchronization procedure.
Make sure the MaxiSys Display Tablet has a charged battery or is connected to an AC/DC power supply.

To pair the VCI module with the MaxiSys system

1.Power on the MaxiSys display Tablet
2.Connect the 26-pin end of the data cable to the J2534 ECU Programming Device’s vehicle data connector
3.Connect the 16-pin end of the data cable to the vehicle data link connector (DLC)
4.Tap the VCI Manager application on the MaxiSys Job Menu of the tablet
5.Select BT from the connection mode list
6.Tap the Scan button at the top right corner. Now the device starts searching for available pairing units.
7.Depending on the VCI type you use, the device name may display as Maxi suffixed with a serial number. Select the required device for pairing.
8.When pairing is successfully done, the connection status displayed to the right of the device name is shown as Paired.
9.Wait a few seconds, and the VCI button on the system Navigation bar at the bottom of the screen shall display a green tick icon, indicating the display tablet is connected to the VCI device.
10.Tap the paired device again to unpair it.
11.Tap the Back button on the top left to return to the MaxiSys Job Menu.

NOTE:

A VCI module can be paired to only one Display Tablet each time, and once it’s been paired, the device will not be discoverable for any other unit.

Before update the VCI software, please make sure the MaxiSys tablet network connection is stable.

Update VCI Software

To update the VCI device software

1.Power on the MaxiSys display tablet
2.Connect the VCI device to MaxiSys tablet via USB
3.Tap the VCI Manager application on the MaxiSys Job Menu of the display tablet
4.Select Update from the connection mode list
5.The current version number and the latest version number of the VCI software will be displayed after a few seconds, click Update Now to update the VCI software if available

amazon-1-2

Autel MaxiSys MS908P Authorization Check Failed! Error Code 3 Solution

Here is the solution to MaxiSYS MS908P professional diagnostic system  error code 3 “Authorization Check Failed” problem.

error message:
Authorization Check Failed!
Error Code 3

amazon-4-1

Causes:
If you changed language, you may occur the error.

How to solve Autel MS908P Authorization problem:
connect to the internet
log in PC Suit upgrade tool on networked computers
Obtain authorization automatically
If this serial number to determine the corresponding Autel ID, you can contact technical support queries.

Autel Maxisys Elite Diagnostic Tool

16-1
Autel Maxisys Elite Diagnostic Tool w/ U.S. Technical  at Obd2tool.com Support (Upgraded Version of MS908P Pro) with Wifi Bluetooth Full OBD2 Automotive Scanner with J2534 ECU Programming Extensive Vehicle Coverage

1.first-hand troubleshooting of diagnostic bugs and errors, and one-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized

2.ADVANCED ECU CODING & PROGRAMMING; Exceptional OE-Level functionality diagnostic tool from comprehensive OBD2 scanner diagnostics & services to advanced ECU coding and programming working with a SAE J2534-1 & -2 compliant vehicle programming pass-thru interface

3.AUTOMATIC SYSTEM & 2 YEAR SOFTWARE UPDATES; Automatic automotive obd2 scanner system and software updates with real-time push message notifications via the internet with instant remote control U.S. tech support anytime, anywhere and interactive Data Logging sessions enable direct contact with Autel

4.EXTENSIVE VEHICLE COVERAGE; The most extensive diagnostic scanner code reader with complete system coverage for more than 80 US domestic, Asian and European makes and models

5.UNIQUE ERGONOMIC DESIGN; The scan tool is with rubberized outer protection and a rugged internal housing

No doubt, the maxisys elite OBD-II scanner certainly surpasses much beyond the general expectations with any vehicle engine scanner tool. The tool is designed for 3 purposes – Multi Tasking, Speed and Simplicity that is the prime need, especially, for any busy automobile repairing workshop.

Autel Elite Scan Tool is for any workshop owner who wants to close the deals much faster with a reliable scanning device. Yes, you can rely on this small diagnostic gadget. Although the price might deter you purchasing this one but it earns it’s cost within a few months after buying. It’s a product that over delivers.

In my research, I found it to be the Autel Scanner in the market that has a positive track record for serving it’s buyers.