Introduction to Autel MaxiSys Pro MS908P Diagnostic techniques

29-1

Autel Maxisys Pro MS908P is potent a diagnosis plus research technique pertaining to vehicles. Autel MaxiSys Pro MS908 analysis technique can be incredibly populor in auto a diagnosis current market, when Autel MS908P will offer lots of the important attributes belonging to the MaxiDAS DS708 with intense ease of make use of plus potent analysis functionality.

Autel MaxiSys Pro MS908 Autel MS908P Auto Analysis Technique

MaxiSys? Analysis Program is definitely an evolutionary sensible solution pertaining to customized Auto diaggnosis plus ECU programming. Exactly why point out consequently? Is Autel MaxiSys Pro MS908 equiped with a bunch of special attributes? Yes, you can get these under:

Autel ms908 attributes a great very quickly A9 quad-core pick, your 32G reliable point out hard disk including a very delicate hunting for. 7’’LED capacitive touch display.

Maxisyspro ms908 Displaying the latest AutoVIN technological innovation to identify CAN EASILY vehicles of hospitality attire touch, plus joined with the particular exceptional AutoScan purpose, the particular MaxiSys is the many bright technique in the industry.

The particular MaxiSys attributes sophisticated dual-band(2. 4GHz plus 5GHz)802. 11n Wi-Fi that’s up to twice when quickly when every previous-generation analysis models. The particular MaxiSys Auto Communication Interface(VCI) attaches by means of reputable Long-Range Class 1 Buletooth towards the intended for capsule.

ECU Coding plus Programming

The particular Coding purpose is employed that will configure the particular auto manipulate modules(ECUs) with extra ranges, while Programming is employed that will reflash the particular auto ECUs. Most of these performs permit you to revise laptop application about the auto towards the newest variant, together with that will reprogram adaptive information for certain parts right after doing fixes or maybe substitutes. MaxiSys is among the almost no analysis models on this planet with the ability involving preforming harmless plus reliable coding plus display programming with affordable expenses.

J2534 Reprogramming Ability

The particular VCI pertaining to Autel Scanner MaxiSys PRO is usually a SAE J2534-1 &-2 Compliant Programming Program. With all the kept up to date OEM application, It is able of exchanging the earlier software/firmware in electronic manipulate units(ECUs), programming innovative ECUs plus fixing software-controlled driveability concerns plus emission concerns.

Absolutely compatible with equally SAE J2534-1 plus J2534-2 reprogramming specifications, Performs the conventional Passthru J2534 functionality.

Quickly functionality ensures fast reprogramming involving also the particular newest controllers.

This kind of article is embraced by way of ADK automotive analysis provider, when you’ve got every tips concerning autel maxisys ms908, make sure you give people concept or maybe check out each of our most important web-site to contact people.

What do you think about Autel MaxiSys Elite?

34-1

Zach Davis Said: “Moved up from the Autel Maxisys Pro MS908P. The docking station is nice since I can leave it on my toolbox all day. the screen is a million times better than the 908p and it also has more memory. This thing is faster than the 908P in boot up time and also navigation through the menus and connecting to the vehicles. This comes with the newest J2534 which is smaller than the one with the 908P and also has no antenna. Ive used it to code a few cars and also with my Laptop to flash a few different makes of vehicles. You just need to make sure to install the right software. If your a professional this is the tool for you. my snap on versus stays in the toolbox 99% of the time now that I have this”.

stuzman Said: “I’m a shade tree mechanic that needed something more powerful than the basic code readers. I used it to reset adaptations and do a quick learn on a transmission in a Chrysler Pacifica and it worked great. This has a lot of functions for the money”.

Hannah Kennedy Said: “The Maxisys Elite met my needs and was able to communicate with all of the vehicles that I own. I compared it to my Tech 2 scanner and the same functionality was built within this tool. And the bi-directional controls were the same and worked flawlessly. It’s a very capable tool with lots of features such as reprogramming keys, fobs, modules and being able to communicate wirelessly with the vehicle”.

Alex3lizondo Said: “I’ve been a tech for almost 8 years and this is the best hands down scan tool. I recently owned the autel ds708 for a number of years and did me great for the time. I wanted to upgrade to a newer model. So far it’s been good with communicating with all make and models. Shows multiple scan data pids, good graphing of o2 sensors. A fourth of a price for a snap on versus and still has more functions besides the lab scope. I work with another technician and he still needs to borrow my scan tool at times”.

Carlos Zapata Said: “The Autel Scanner does so much and for the inexpensive price, is a steal. From programming keys, resetting PCM’s, adaptive learning and bi-directional controls. Customer service on the other hand is awful. I bought the tool and could not get in touch with anyone to save my life. Customer service is key no matter the product and Autel needs to learn this. Furthermore, for those who do not know, you do not have to be plugged into a power source when connected to an OBD2 port. In addition, if you copy the files from the SD card to another upgraded 16GB 80 plus MBPS, pids and information will load faster; if you delete the vehicles you will never work on or see, it will be even faster. It is not a scan tool though, it is a diagnostic analysis machine and it will take awhile to load parameters and control, because it is preparing for a command state where the tool becomes an actuator. Blah Blah Blah you get the idea, great tool for diagnostics and people who seldomly need to reset PCM or program modules, for those who replace a lot of Computers such as the PCM,ECM, TCM….. go with the upgraded MAXISYS. For the prices, you will surely be impressed with the capabilities and to choose a different tool, you will spend no less than 500 plus or more than the maxidas. Hope this helps someone looking into the tool.”

Autel MaxiSYS PRO MS908P Diagnostic System with Wireless VCI J-2534

4-1
You’re a professional mechanic, an enthusiast or and mechanic shop owner? Then you are here on the right page with the in-depth review about Autel MaxiSys Pro MS908P OBD2 Scanner, which is only for mechanics. The Autel MaxiSys Pro MS908P Professional OBD2 Scanner provides best solutions for ECU programming and Specialized Automotive Diagnosing.

Autel MaxiSys Pro MS908P is easy to use with a large pool of features that ensure optimum diagnosis performance. It is capable of covering all diagnostics that are OE-related. It’s the best solution for diagnosing peerless smart vehicle repairs.

4-2
MaxiSYS Pro MS908P Diagnostic System with J2534 Reflashing Hardware
The MaxiSYS Pro was designed for the professional technician who frequently performs J-2534 reprogramming and advanced coding functions. It utilizes an ultra-powerful 1.40GHz A9 quad-core processor that offers a 50% increase in speed versus competing products. The 9.7” LED capacitive touch screen offers a high resolution of 1,024 x 768 allowing the technician to easily zoom in and out of wiring diagrams and technical information. The revolutionary multitasking Android Operating System incorporates a 32 GB Solid State hard drive to store all of the Autel’s comprehensive OE-level vehicle software with plenty of room to spare.

The Autel Scanner MaxiSYS Pro includes the MaxiFlash J-2534 reprogramming tool which doubles as the wireless Vehicle Communication Interface (VCI).The MaxiSYS Pro includes all necessary adaptors and cables needed for 1996 & newer vehicles, as well as one year of FREE technical support and updates.

The Maxisys Pro MS908P has a wide vehicle coverage, from 1996 onward. It can work efficiently with over 80 vehicle makes in the US, Europe, and Asia. MaxiSys pro Software, as well as a reprogramming box, is incorporated into the tool to make it possible to solve complicated problems. The Autel MaxiSys Pro MS908P OBD2 scanner enables enhanced vehicle identification, quick and accurate, as with its Auto-Vin technology.

MS908P VCI – J2534 ECU Programming Device

25-1  25-4

1.Functional Description

1.  Ethernet Port

2.  USB Port

3.  Power LED – illuminates solid green when powered on

4.  Error LED – illuminates solid red when serious hardware failure occurs

5.  Bluetooth LED – illuminates solid green when connected with the MaxiSys display tablet through Bluetooth communication

6.  Ethernet LED – illuminates solid green when connected with the Autel Scan Tool MaxiSys display tablet or an existing LAN via the Ethernet serial cable

7.  USB Status Light — illuminates solid green when the device is properly connected and communicating with the MaxiSys display tablet or the PC via the USB cable

8.  Vehicle LED – flashes green when communicating with the vehicle’s network

IMPORTANT: Do not disconnect the reprogramming device while this status light is on! If the flash reprogramming procedure is interrupted while the vehicle’s ECU is blank or only partially programmed, the module may be unrecoverable.

9.  Bluetooth Antenna

10. DC Power Supply Input Port

11. Vehicle Data Connector (DB26-Pin MVCI)

12. External Programming Voltage Output Port

13. A/D Input Port

J2534 Reprogramming Capability

The J2534 ECU Programming Device is a SAE J2534-1 & -2 compliant PassThru reprogramming interface device. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs and fixing software-controlled drivability issues and emission issues.

Communication

The J2534 ECU programming device supports Bluetooth, Ethernet and USB communication. It can transmit vehicle data to the MaxiSys display tablet with or without a physical connection. The working range of the transmitter through Bluetooth communication is 755 feet (about 230 m). A signal lost due to moving out of range automatically restores itself when the display tablet unit is brought closer to the VCI unit.

Power Sources

The J2534 programming device can receive power from both of the following

Sources:

Vehicle Power
AC/DC Power Supply

Vehicle Power

The J2534 programming device operates on 12-volt vehicle power, which it receives through the vehicle data connection port. The MS908P powers on whenever it is connected to an OBD II/EOBD compliant data link connector (DLC). For non OBD II/EOBD compliant vehicles, the device can be powered from a cigarette lighter or other suitable power port on the test vehicle using the auxiliary power cable.

AC/DC Power Supply

The J2534 programming device can be powered from a wall socket using the AC/DC power adapter.

Technical Specifications

25-3

Cars & Computers The History of Diagnostic Tools

One common factor to be found in every decade’s ideal future is a sense of comfort and reassurance, and in this regard car diagnostic tools could not be more modern. For example, each successive generation of products and software from Launch Tech not only allows for more extensive diagnostics of a vehicle’s performance; they also make the task more effortless and less time consuming as you go through the various generation models.
car start problems

But exactly how far has this technology come in the last few decades? In this entry of the Launch Tech UK blog, we’ll go from creation to current day with this history of diagnostic tools:

As a brief description, an car diagnostic is an electronic device that can be used to diagnose, interface and even partially reprogram a vehicle’s control module. Scanners in particular perform the same functions as a diagnostic code reader, except they also give the user additional diagnostic information, and can perform functional tests on the vehicle. They’re designed to function in tandem with your car’s on-board computer system, which itself monitors engine emissions controls and systems whilst your car is in use. The first generation of On-board diagnostic (OBD) tools were developed in the 1980’s, originally as an expensive diagnostic option only really available for professional mechanics.

Throughout the decade, automotive scanners were produced in the United States, using various cables and adaptors that would be compatible with certain car models, makes and their respective years. The first commercially available code readers hit car part stores in and around 1989, but it was only in 1996 that the automotive industry lost their exclusive ability over vehicle on-board diagnostic systems, with further standardization of the technology caused by stricter federal regulations.

The presence of two generations of on-board diagnostic systems, OBD-I and OBD-II, are intrinsically linked to this change in regulations, and a combined effort to clean up our air. The “gas attack” in Los Angeles during the summer of 1943, as well as the proliferation of lethal smog in London in 1952 were two environmental episodes that turned the business culture of voluntary emissions regulations into one of national requirement. The autel scanner in use at the time served fine in letting drivers know if their vehicle had a malfunction, but from an emissions point of view there were some serious flaws, to the point where your vehicle could be spitting out raw unburned fuel out of its tailpipe and neither you nor the computer would have any idea! This lead to the creation and required implementation of auto key programmer; the same technology monitored and read by today’s Launch OEM level diagnostic tools and aftermarket products.

Speaking of, the Launch Tech Co LTD itself was founded in 1992, developing their first generation of LE100 scanners two years later. Now global leaders in the automotive diagnostics market with a range that includes the C Reader VI, CRP123 and the CRP129, the Launch parent company has 13 branches in and amongst Europe, North America, Central and South America, Africa, Middle East, China and Asia Pacific, and has supplied to the UK market since 2003.

28-1

Top 5 ways to improve your car performance

How to improve car performance? Do you want to make your car go faster?  Statistics show that almost every car enthusiast wishes to add more power to their car or wish to improve fuel-efficiency, but how to achieve that? Well, actually car maintenance and repair service provider may be the best solution for improving the performance of your car. With the help of a professional, you will find how a car maintenance and auto repair Obd2 scan tool can make your car go faster.

Installation of Supercharger
Superchargers are most commonly used by the repair service providers to improve car’s performance. With proper installation, it can produce about 50% more horsepower. Wondering how does this work? After installation, it pressurizes air intake to more than the normal atmospheric level. This means, more air goes into the engine which burns more fuel to generate more power. Spinning rate of a supercharger is minimum 50,000 RPM. So your will behave like a more powerful vehicle.

28-1

Weight reduction technique
The first thing that a car maintenance and repair service does to improve the performance of your car is reduction of weight. They follow the basic rule here that lightweight things move faster. All the heavier parts of the car are switched out with the lighter parts to make it more aerodynamic. For instance, they replace the heavy glass windows with acrylic versions.

28-2

Cold air intake kit installation
You may also be asked by the car repair service to install cold air intake kit for better performance. Since the efficiency of your car greatly depends on the air, a cold air intake kit will be effective. Experts install this kit to bring cool air into the internal combustion engine resulting higher performance and better engine efficiency. You may know that colder air is denser than warm air, means it boasts more oxygen than the hot air, so your car experiences a more dynamic combustion in the engine leading to more power.

28-3

Better Air Filter
For better use of the air/fuel combination, repair experts also install better air filters. Since air filters are made up of cotton and other materials, they get damaged over time and degrade the performance of the High-quality air filters are made of fabric. So they can be washed and reused to enhance performance.

28-4

Performance chips installation
All the latest cars, comes with an onboard computer regulating things to control the entire show. A good car repair expert knows the importance of performance chips very well. To boost your car’s performance, they will install performance chips, to control functions such as timing, anti-lock brakes as well as the all-important fuel-to-air ratio. Performance chips are also known as super chips and they increase the power of the engine and horsepower.

An expert from a reputed car repair company can help you out to improve the performance of your Obd2 software. Consult one such expert and let the professional know what exactly you want in your car. Since they are quite experienced in this, they’ll device a unique plan to make your car unique.

Except for the routine maintenance, if your car had some problems, you can always buy vehicle car diagnostic tools from our website, and then diagnose malfunctions by yourself. These vehicle diagnostic tools are:Launch X431 Scan ToolsXTOOL Scanner Autel Scanner and so on.