Lonsdor K518ISE Program Opel Astra J 2015 Remote Key

New test report: successfully added a remote key on a Opel Astra J 2015 using Lonsdor K518ISE Key Programmer

Note: Pin code is required. You can also read pin with Lonsdor.

Connect K518 host with vehicle via OBD socket

Select Immobilizer->Opel->IMMO->Astra->Astra J->2010-2016->Immobilizer

lonsdor-k518-opel-astra-j-1

lonsdor-k518-opel-astra-j-2

lonsdor-k518-opel-astra-j-4

lonsdor-k518-opel-astra-j-5 lonsdor-k518-opel-astra-j-6

lonsdor-k518-opel-astra-j-7

Read key number

lonsdor-k518-opel-astra-j-8

Turn on ignition switch

lonsdor-k518-opel-astra-j-9

K518 identified current number of keys: 2

Select Add key function

lonsdor-k518-opel-astra-j-10

Close all doors and turn on ignition switch

lonsdor-k518-opel-astra-j-11

Lonsdor K518 required to enter 4-digit PIN and confirm

lonsdor-k518-opel-astra-j-12

Configuring system,wait for 10 minutes

Turn ignition off and remove key

lonsdor-k518-opel-astra-j-13

Insert key to be programmed and turn on ignition

Configuring system

Turn off ignition and remove key

lonsdor-k518-opel-astra-j-14

Open and close driver door, make sure all the electrical appliances are off

Turn on ignition switch

lonsdor-k518-opel-astra-j-15

Program successful

Turn off ignition and remove key

Open and close driver door, make sure all the electrical appliances are off

Configuring system,wait for 45 seconds

Turn ignition to ON position

Turn off ignition

Turn on ignition switch again

lonsdor-k518-opel-astra-j-16

Program completed

Test remote

lonsdor-k518-opel-astra-j-17
lonsdor-k518-opel-astra-j-18

Start engine

lonsdor-k518-opel-astra-j-19

Done.

How to activate Complete Renault Clio support on Lonsdor k518ise

Look here: Renault Clio Car or truck List: Lonsdor K518ISE New vs. Old Version

New version: K518 using the newest application updated on 10.2018
Old version: K518 with application ahead of 10.2018

k518ise-1

Distinction of new and old versions:
Clio Automobile List in the OLD Lonsdor K518ise:
Renault Clio 1997-1999
Renault Clio 2000-2007 VIN with VF1*B
Renault Clio 2006-2012 VIN with VF1*R

k518ise-2

Clio Car List within the NEW Lonsdor K518ise:
Renault Clio 1997-1999
Renault Clio 2000-2007 VIN with VF1*B
Renault Clio 2006-2012 VIN with VF1*R
Renault Clio Ph2
Renault Clio III
Renault Clio IV

k518ise-3

RENAULT\Clio\Clio II Ph2 Add essential
RENAULT\Clio\CLIO III.\Without clever Add key
RENAULT\Clio\CLIO III.\With smart Add essential
RENAULT\Clio\Clio IV.\2012- Add key,Recover data

The way to update Auto Key Programmer Lonsdor to get the complete Clio help:

You may have to activate trial in 1st menu
Which is, update your Lonsdor with WiFi

k518ise-5
k518ise-6
k518ise-7
k518ise-8
k518ise-9

www.obd2tool.com

Lonsdor K518ISE Program Renault Scenic III 2015 Smart Card

New test feedback: Lonsdor K518ISE Renault Scenic year 2015 smart key card programming success.

4-1

Select Immobilizer->Renault->Select from vehicle->Megane Scenic-> Scenic III (2009-2015)

4-2

Turn ignition to ON position

Read VIN, detect key number and ID

4-3

4-4

4-5

Insert original key card into key slot

4-6

Follow system prompt to program key

4-7

4-8

Program next key.

Insert new key card into slot and follow Auto Key Programmer Lonsdor K518ISE prompts

4-9

Success.

Test the new smart key.

4-10

Done.

 

www.obd2tool.com

Lonsdor K518ISE Abnormal Display After Upgrade Solution

Here’s the working solution to Lonsdor K518ISE Key Programmer abnormal display after upgrade.

Problem: Click “Immobilizer” button after updating the device, it skips to below interface:

24-1

Solution:

Step 1: After rebooting the device, please press and hold the setting and return buttons(in below red box) simultaneously for few seconds..

24-2

Step 2: The following interface appears, please click “uninstall APK” button in the red box, and wait for few seconds.

24-3

Step 3: It skips to below interface, please click “OK” to continue.

24-4

Step 4: The following interface appears, please click the button in the red box to install factory-set/default APK.

24-5

Step 5: Please wait for about half a minute. The factory-set APK is installed and initiates automatically. Then input the password on boot, and click “OK”. It skips to below interface, click “update” in the red box. Remember to reboot the Auto Key Programmer Lonsdor K518 after updating. You can use it normally now.

24-6

www.obd2tool.com