Tag Archive: bmw scanner

How to do BMW G Series Coding with BMW ICOM cable

Topic: How to do BMW G Series Coding with BMW ICOM cable I’ve collect all useful tips of BMW G series coding on the web and make a write-up here. Hope it helps. Q: Is it possible to code BMW G-series…
Read more

Solved BMW ISTA error IFH-0010, Vehicle could not be identified


This blog list 3 kinds of bmw diagnostic scanner ISTA errors and solutions you may need. ISTA NCS error IFH-0010+ solution ISTA error”MSVCP120.dll is missing”+ solution ISTA error “The vehicle could not be identified”+ solution Note: All error solutions here are…
Read more

(Fixed) BMW ICOM A3 program ok but fail to diagnose

Question: BMW ICOM A3 Program ok but diagnose with no luck, device fail to connect. How to do? bmw icom diagnosis Possible reason: The hardware version is too low to do diagnostic job. Solution: Update firmware to the newest version,…
Read more

Learn much about BMW ICOM & ICOM A2

Learn it from an experienced technician. I consulted ICOM A2 from the professional technician mainly because I read much information in BMW forums telling that the only difference between ICOM A2 & ICOM is the hardware. Actually, ICOM A is the…
Read more

How to save ISTA-D BMW Diagnostic Operations and Tests?

I have installed New BMW ICOM software ISTA-D (3.48) on my laptop. It works well and could read the error codes and perform tests. It seems though that the readings and the tests results (i.e. the operations) are not saved anywhere…
Read more

V2017.7 BMW ICOM Software HDD ISTA-D 4.05.20 ISTA-P

V2017.7 BMW ICOM Software HDD ISTA-D 4.05.20 ISTA-P Software version: ISTA-D 4.05.32 ISTA-P 3.61.5 VIN: 2017.04.25 Not connected 9000 days remaining BMW ETK: 2017.06 BMW KSD: 06.2017Multilanguage BMW FSC Navigation Code Generator BMWAiCoder for BMW Coding With free BMW…
Read more