Ktag Kess unlock CRP3 LPC2478 via J-link (Pinouts attached)

As you know, for crp3 we can do the trick for unlock crp3 heating on KTAG or KESS V2 programmer or buy a new NXP and write it (only one time)
Here are some questions & answers on Google form, questions about “how will you use J-ink if its crp3 ?”…

Q: Can I update NXP directly if at this moment I have Ktag 6.070? Or I will need to replace it with new one and then to update to 7.030 ?
A: if your actual fw is crp3 you will have to do “heating trick ” or change nxp, you will know if jlink doesn’t recognise firmware ( i think message about cannot find cpu chain or something like that) , simple

Q: More information this real version or china version? and whats this you can update or or only talk?? thanks
A: this is fw 7.030 we are talking about REAL firmware, not modding number in sw or similar, about second question i don’t understand what you ask.

Q: Need connect 12v ? my led red always off if not connect 12v

A: LED needs to monitor the state of the processor and it must be switched by the controller. If you do not have the power on the controller when connected by USB, then connect the other power source.

Q: How work on ktag, i tried but led already on

A: LED need to monitor the state of the processor and it must be switched by the controller. If you do not have the power on the controller when connected by USB, then connect the other power source.
To flash the LPC2478 via J-link, the level of protection should be CRP0, ie protection should be disabled. If security levels CRP1 and CRP2 have the ability to erase and reflash LPC2478 via UART, eg via USB to UART TTL adapter ftdi232 or cp2102 and Flashmagic program.

Q: LPC2478 connect Flash Magic, KESS or KTAG?

A: …KESS V2 & KTAG…both ok

Note: not all ktag 5.001 can be read with j-link
some are crp3 protected
some are not

Attachment 1: Code Read Protection (CRP)

29-1

Attachment 2: Here are all pinouts

A method of disabling the protection CRP3 microcontroller LPC2478…. make a photo high resolution of connection on pcb of that wire…and also,what pin you must to touch on nxp

29-2

29-3

K-Tag pins.

29-4

Attachment 3: Photos ofLPC2478 connect Flash Magic

It allows you to erase the NXP MCUs on both Kess & KTag via UART0. This will work for firmwares up to CRP2. CRP0, best off using J-Link as it only takes 30s as opposed to 30 minutes. If you’ve blocked your KTag properly (CRP3), it won’t help you. You will need to swap the processor.

Kess V2 connection method 1:

29-5

Kess V2 connection method 2:

29-6

KTag connection:

29-7

Disclaimer: Photography of Pinouts is not mine. I am not responsible for a bad use.

29-1

Kess V2 DPF Off Mercedes Sprinter 315 Biturbo

Topic: Dpf off mercedes sprinter 315 biturbo with Kess v2 master ecu programmer

What is DPF?

A diesel particulate filter (or DPF) is a device designed to remove diesel particulate matter or soot from the exhaust gas of a diesel engine.

What is a DPF in a car?

A diesel particulate filter captures small soot particles, preventing them from being expelled into the atmosphere Photo: ALAMY. … The DPF is designed to catch the diesel exhaust fumes that would usually be emitted in a cloud of black smoke.

What is DPF removal?

From February 2014 the inspection of the exhaust system carried out during the MoT test will include a visual check for the presence of a DPF. A missing DPF, where one was fitted when the vehicle was built, will result in an MoT failure.

What tool for mercedes sprinter 315 DPF Off?

Kess v2 master, clone or original

DPF off Mercedes with Car ECU Programmer Kess v2 v5.017, any success?

Yes, look here:

DPF off Mercedes Sprinter 315 biturbo with Kess v2 master

29-1
29-2 29-3 29-4 29-5 29-6 29-7 29-8

Any other solutions of Mercedes DPF off?

Yes, download Professional DPF+EGR Remover 3.0:

(also done with KTAG or KESS)

https://mega.nz/#F!zV1USZZL!X2mHnpX3Xc09sqYXlOAVgw

Mercedes ECU listed: EDC16C31, Delphi DCM3.4, EDC16C31 Vito and Type2, EDC16CP36, EDC16C3, EDC16C31(2011+)EDC17CP10,M55 Error fixer

Professional DPF Remover 3.0 Car List:

Alfa   : EDC16C39 Type1 and Type2

Audi  : EDC16UX,EDC16CP3 / 34, EDC16U31, EDC17CP14, Siemens PPD v1.1, V1.2, V1.3,    EDC17CP44,EDC17C46,EDC17CP04, EDC16C34-4

BMW  : EDC16C31 – 35, EDC16C31 (1MB), EDC17CP02,EDC16CP35, EDC16C31New, EDC16C35,EDC17CP45    EDC17C41

Chrysler : EDC16CP31

Chevrolet : EDC16C39Citroen  : EDC15C2, EDC16C34, EDC17C10, SID807

Fiat  : EDC16C39(Ducato), EDC16C39 JTD, MJD 6F3, 6F3 Doblo, EDC16C39 Generic, SID803A,    Marelli 8F2, Marelli 8F3,

Ford  : EDC16C34,EDC16C34-2, EDC16C34-2.29, EDC16C34-5, SID 206, SID807, SID803MPC,    SID803A, SID206(SMAX type), SID206 Kuga, EDC16C34 Picasso Type, EDC16C3-9.18

Lancia  : EDC16C39Honda  : EDC16C31, EDC17CP06, EDC16C31(Advanced)

Hyundai / KIA : EDC16C39-D373, KIA EDC16C39 Type2,

Hyundai EDC16C39 Caren, EDC16C39 SantaFE, EDC17C08

Iveco  : EDC16C39

Isuzu  : Denso, Transtron DMax

Jaguar  : SID204, EDC17CP11

Jeep  : EDC16U1, EDC16CP31, EDC17C49

LandRover : EDC16C39-

Ford, SID208

Mazda   : Denso 3-8 all series, EDC16C3,Denso CX7 Type with Adblue, EDC16C34

Mercedes : EDC16C31, Delphi DCM3.4, EDC16C31 Vito and Type2, EDC16CP36, EDC16C3, EDC16C31(2011+)    EDC17CP10,M55 Error fixer

Mini Cooper : EDC16C35

Mitsubishi : Denso (Full 2 types supported), EDC16CP39

Nissan  : Denso,EDC16C36, EDC16CP33 Type1 and Type2, SID305

Opel-Vauxhall : Denso,Denso Signum,EDC16C39, EDC16C9, EDC17C18 – C19, Marelli MJET 75-90cv, Z16DT Marelli,     Denso Signum, Z16DTC, Z19DT

Peugeout : EDC16C34, EDC15C2, SID803 MPC,Delphi DCM3.5, SID803A, Delphi DCM3.4

Porsche  : EDC17CP44

Range Rover  : EDC17CP11

Renault  : EDC16C3 Type1 and Type2,EDC16C32, SID305,EDC16C11

Saab  : EDC16C39,EDC16C9

Skoda  : EDC17CP14, PCR2.1, Octavia19 Bosch,EDC17U01,EDC17CP20,EDC16CP44,EDC17U01

Seat  : Siemens PPD V1.2, PCR 2.1,, EDC17U01,EDC17CP20,EDC16CP44

Subaru  : Denso

Suzuki  : EDC16C3 Type1 and Type2, EDC16C39

Toyota  : EDC17CP07

Volvo  : EDC16C31 Type1 and Type2,SID803MPC,EDC16C34, SID803A Type1 and Type2, EDC17CP22

VW  : EDC16CP34, EDC16U31,,EDC17CP14, PCR2.1, EDC16CP34-4, EDC17U01,EDC17CP20,EDC16CP44    EDC17CP46,EDC17CP52,EDC17P24, EDC17CP44, EDC17CP54

All   : EDC16 – EDC17 ECU’s automatic DPF switch finder item  *  : Some EDC16 and all EDC17 ECU’s solutions are using internal switches.