Buick GL8 2018 24C32 Odometer Correction with CG100 EEPROM

Purpose: Buick GL8 2018 24C32 mileage adjustment

Car model: Buick GL8 2018

Chip: 24C32

Tool to use:

CG100 programmer

EEPROM adapter


Check the specific Buick car model and year.



Record the current mileage.



Power off the vehicle the vehicle, remove the BCM, confirm the eeprom chip.




Open the CG100 software, enter the corresponding operation menu, follow the software description to choose the adapter EEPROM.


Click on”Mileage (8 feet)” to enter


Selet “Buick”to enter


if the CG100 software has no GL8 model, please try the other model which has as the same GL18, for example, Encore which chip is also 24C32

Dismantle the chip 24C32, power on CG100, follow the software instructions to operate, if any problem, please contact at email Sales@OBDexpress.co.uk for assistance.




Click on “Start”(In Chinese “开始”)


Click Read(In Chinese”读取”)

CG100 is working, please do not disturb.


After Reading succeed(In Chinese”读取成功”),Click”OK”,and save (in Chinese”保存”)the original data


If the mileage that CG100 readout is close the real value, click”Adjust mileage” (In Chinese”修改里程”)and input the new
mileage, then click on “YES”(In Chinese”确定”). Otherwise, please contact CG Company


Click”Write”(In Chinese”写入”), and wait for monent


Mileage reading and writing success, install the BCM back to Buick GL8, power on the car, verify it is working.



How to use CG-PRO to program Jaguar Land rover KVM key

Post is on how to use CG Pro to program Jaguar Land rover KVM key perfectly in step by step procedure.

Part 1: Read out the data from smart computer and anti-theft computer.

Remove the smart computer and the IMMO box from the car.


BCM immo box


Image 2: Smart ECU RFA

Wiring according to the wiring diagram in the software, click on “Diagram” to follow.


BCM wiring diagram in the CG Pro software.


BCM physical wiring


Land Rover RFA 2m53J 9S12XET256 wiring diagram in the CG Pro 9S12 software.


Land Rover RFA smart ECU physical wiring:

You need not connect the CLK line first, if you are prompted to decrypt when reading, then connect the CLK line according to the software wiring diagram.


Choose BCM or RFA module, read and save the data.

CG-PRO-program-Jaguar-Land-rover-9     CG-PRO-program-Jaguar-Land-rover–09

Note: Do not unplug the wiring immediately after the data is read out successfully, later you will write key and then rewrite data.

Part 2: Load the data into CG Pro software to program key

Click on “Key” – ” Jaguar / Land Rover” – Model [KVM – XEP100 (BCM) for example], then click on “Key Function” to enter the key programming menu incl. load KVM DFLASH, load KVM EEPROM, Load BCM DFLASH, Read key, Write key etc.


Menu options:

Step 1: Load KVM DFLASH

Step 2: Load KVM EEPROM

This function is for emergency start (optional option). If you need to operate this option, please read out BCM immo data and meanwhile tick on this option when key is programming, then load BCM data.

Step 3: Place a blank key into the CG Pro Key Programmer, click on “Read key” button.

***Can read key ID and check if the key is placed correctly.

Step 4: Select key position and then click on “Write key” button.


Please save the data in the order of DFLASH,EEPROM,BCM.

Part 3: Rewrite the data generated after key programming.


1.Back to the main menu where you read out the data just now.

2.Open the corresponding data saved after the key is wrote.

3.Write data after connecting the computer.


Now, you can unplug the cables from the computer and CG Pro, then reinstall the KVM module back to the car.And for more CGDI Programmer,you can check here:CGDI Programmer

35160WT adapter for CG Pro 9S12

35160WT adapter for CG Pro 9S12 features: For the 35160T chip design that cannot be erased, it can directly repair the original vehicle red dot and directly use the original car chip. This function is the first in the world.

35160WT adapter for CG Pro 9S12 for sale now
Save 18USD after the sale time expires


CG-Pro V2.0.0.0 update related 35160WT adapter


1.Added support chip
ST 35160WT (Must use a dedicated 35160WT adapter)
Microchip PIC18F6520
Microchip PIC18F6720
Microchip PIC18F8520
Microchip PIC18F8620
Microchip PIC18F8720
Microchip PIC12F635
Microchip PIC12F683
Microchip PIC16F631
Microchip PIC16F636
Microchip PIC16F639
Microchip PIC16F677
Microchip PIC16F684
Microchip PIC16F685
Microchip PIC16F687
Microchip PIC16F688
Microchip PIC16F689
Microchip PIC16F690

2.Added Dashboard
BMW 35080 V5 (35160WT) (Must use a dedicated 35160WT adapter)

3.Added ECU
Delphi MT22 MT60 (PFLASH)
Delphi MT22.1.1-2M53J (PFLASH)

4.Added user guide function
Now, after the program is installed first opened, it will enter the basic functions page guide to help users quickly understand the software.

5.Software structure optimization
Operation interface adjustment to improve functional clarity. Reduce resource consumption and improve operational stability.