Tag Archive: GM Tech 2 Scanner

GM TECH2 program DDM, enable comfort opening closing and learn pinch

Device to use: GM TECH2 Security via TIS2000! Without this you won’t be able to add anything!!! I bought GM Tech 2 $358 (shipping not included), details: TIS2000 $18 free shipping, from OBD2TOOL Step –by – Step Procedure 1.Go to “Main…
Read more

Customer real experience with GM Tech 2 Scanner (Review)

Here is the my real experience on gm tech 2 Scanner from obd2tool.com Bought the highest quality version as i didn’t want to risk any issues with the device, and it all works fine and i do not regret my purchase….
Read more

The Tech 2 hardware initial installation steps

1.  Remove the RS-232 loopback adapter (P/N 02001606) from the storage case (P/N 02002971). Plug it into the RS-232 port. 2.  Attach the Tech 2 DLC cable (P/N 02002952) to the VCI connector. 3.  Locate the DLC loopback adapter (P/N…
Read more

What’s Tech2 TIS2000 hardwaresecurity key used for

I have a question about the gm tech2 hardware/security key. What exactly is the purpose of it? I don’t have one, and was wondering if I can still use the TIS software without it. Reply: There are three versions of…
Read more

GM Tech2 for ALL systems – HP Tuners only for ECM & TCM

What is GM Tech2: The GM Tech2 Scanner, working with TIS2000 software, supports onboard diagnostics and full bi-directional control when performing powertrain, chassis and body diagnostics for GM/SAAB/OPEL/SUZUKI/ISUZU/Holden. What is HP Tuners: The HP Tuners vcm suite is the most…
Read more

same problem as recording images to the memory card via the Tech 2 and TIS

Hello everyone. A few days ago saw that often face the same problem as recording images to the memory card via the Tech2 Scan Tool and TIS. Initially I thought this is a typical problem with MAX232, only a little deeper,…
Read more

What can I do with a GM Tech2 on Chevrolet C5

This is a write-up for those with a GM Tech 2 Scan Tool on Chevrolet C5 Tech 2 scanner is a diagnostic tool for the most part. It can be used to program out/in certain RPO’s in the BCM and can…
Read more

Control Module Stand-Alone Programming Adapter (J-45211) for Cadillacs

The J-45211 control module stand-alone programming adapter (Figure VIIC-41), also called the PCM programming adapter harness, is used to connect the Tech 2 to a vehicle’s PCM and perform SPS functions for the 2000 or later Cadillac models DeVille, Seville,…
Read more

GM Tech2 Initial Hardware Installation

The GM Tech2 hardware initial installation requires the following seven tasks: 1.  Remove the RS-232 loopback adapter (P/N 3000112) from the storage case (P/N 3000116). Plug it into the RS-232 port. 2.  Attach the Tech 2 DLC cable (P/N 3000095) to…
Read more

Unlock Chevy TrailBlazer radio using GM Tech2 scanner

I have successfully unlocked the radio on my Chevy TrailBlazer with a clone Tech 2 Scan Tool from China yesterday. Here I would like to share the procedure. If you also like to unlock the radio, please complete the following procedure,…
Read more