Tag Archive: ICOM BMW

FAQs BMW diagnosticcodingprogramming with ICOM A2+ISTA

Look here: questions and answers of BMW diagnostic/coding/programming by ICOM emulators 1. Is it safe to update software with ISTA on all BMW’s that come through my shop ? What problems can I run into ? (assuming i have a…
Read more

ICOM A2 icom a2 professional version Support Wifi For BMW ICOM A2 B C Full Set

Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection. Interface C  – 20-pin cable for old models. The modified ICOM A2 for vehicles with…
Read more

How to do BMW G Series Coding with BMW ICOM cable

Topic: How to do BMW G Series Coding with BMW ICOM cable I’ve collect all useful tips of BMW G series coding on the web and make a write-up here. Hope it helps. Q: Is it possible to code BMW G-series…
Read more

Solved BMW ISTA error IFH-0010, Vehicle could not be identified

4-3

This blog list 3 kinds of bmw diagnostic scanner ISTA errors and solutions you may need. ISTA NCS error IFH-0010+ solution ISTA error”MSVCP120.dll is missing”+ solution ISTA error “The vehicle could not be identified”+ solution Note: All error solutions here are…
Read more

(Fixed) BMW ICOM A3 program ok but fail to diagnose

Question: BMW ICOM A3 Program ok but diagnose with no luck, device fail to connect. How to do? bmw icom diagnosis Possible reason: The hardware version is too low to do diagnostic job. Solution: Update firmware to the newest version,…
Read more

Learn much about BMW ICOM & ICOM A2

Learn it from an experienced technician. I consulted ICOM A2 from the professional technician mainly because I read much information in BMW forums telling that the only difference between ICOM A2 & ICOM is the hardware. Actually, ICOM A is the…
Read more

How to save ISTA-D BMW Diagnostic Operations and Tests?

I have installed New BMW ICOM software ISTA-D (3.48) on my laptop. It works well and could read the error codes and perform tests. It seems though that the readings and the tests results (i.e. the operations) are not saved anywhere…
Read more