microPod II Configuration

1. On a PC with the wiTECH Application installed, connect the Micropod II with a USB cable and enter
IP “172.22.22.22” into the address bar of an Internet browser.
2. Select Wireless Settings in the menu on the left

14-1

3. Select New and enter the name of your profile that you are creating and select Add

14-2

4. In the Security Settings field enter the Automotive Scan Tool wiTECH Access Gateway wireless profile credentials
* SSID,
* Security: WPA PSK,
* Enter Key:
* Confirm Key:

14-3

5. Select Save at the top of page

14-4

6. Select Close on the next page

14-5

7. Select Manage Networks in the menu on the left

14-6

8. Select radio button for the wireless interface

14-7

9. Next to the profile that was just created select the Select & Start button

14-8

10. Select Close on the next page

14-9

11. Once the connection is complete you will see an IP address populate for the wireless interface
? In some cases you may need to select the refresh button

14-10

12. If you have tried selecting the refresh button and the tool is still not obtaining an IP address
? Select the radio button next to the wireless interface

14-11

13. Select the Disable button in the Wireless Adapter area

14-12

14. Select OK on the warning pop up

14-13
15. Select Close

14-14

16. Select the radio button for the wireless interface

14-15

17. Select the Enable button in the Wireless Adapter area

14-16

18. Select Close

14-17

19. You will now see an IP address for the wireless interface

14-18

20. If you are still unable to acquire an IP, make sure you are within range of the wiTECH wireless network try moving closer to the OBD II Scanner wiTECH Access Gateway