How to make Cummins Insite 8.2.0 work with Nexiq usb link

29-1
Cummins INSITE 8.2.0.184 truck software is compatible with Inline 5, INLINE 6, DPA5NEXIQ USB Link adapters. Here’s the guide on use INSIET 8.2 with Nexiq usb link.

Procedure:

Preparation:

Download INSITE 8.2.0 patch

Cummins insite 8.2.0 lite version patch

Cummins insite 8.2.0 pro version patch

Step 1: Install Nexiq drivers

29-2

Run USB-Link_9.5.0.1 setup on desktop as Administrator

29-3

Click Next to start install NEXIQ USB Link drivers
Accept copyright notice
Click Next

29-4

Installing Microsoft Visual C++ 2005

29-5

Click Next to install Device Tester Setup
Accept license agreement

29-6

Tick Device Tester Install, click Next

27-7

Install software on C:/Program Files/NEXIQ/Device Tester,click Install
Click Next
Device tester setup installation completed. Click Finish

29-8

Accept windows security warning
NEXIQ USB link drivers installation completed.

29-9

Click Finish.
Restart computer

Step 2: Install INSITE 8.2.0.184

29-10

Extract INSITE8.2.0.184 zip folder to desktop
Open INSITE 8.2.0 folder

29-11

Open autorun
29-12
29-13

29-14

Click Manual Install Options->Required Installs->Install INSITE
29-15

Select software language

29-16

Install Microsoft.NET Framework 4.5 Full, INSITE data pack, INSITE CSS service

29-17

Verify PC date and time, click Next
Accpet license agreement

29-18

Finish install INSITE 8.2 software

Step 3: Activate INSITE 8.2.0

Run Cummins INSITE software on dekstop as Administrator
Accept 2 license agreements
Exit INSITE software
Delete all INSITE files on desktop

29-19

Download and paste the Cummins INSITE 8.2.0 pro or lite version patach on desktop

29-20 29-21
Run “820 PRO” and send the ID to your dealer

29-22

The dealer will send you user name and activation key

29-23

Paste user name and registration key to corresponding area

Click on Register.

Activation success.

27-7

Now you can use INSITE software with NEXUQ/Xtruck USB Link hardware.

When you purchase a NEXIQ USB-Link

 

When you purchase a NEXIQ USB Link you can rest assured that NEXIQ is working closely with each of the OEM’s to make certain that your purchase will be able to run operate all the OEM software and have the proper connector and communications with the truck.

Kind of like the Rolex, you don’t want to know what is inside the fake USB-Link from China. It might work, it may not work, and it may destroy the customers ECM. Hey, but you saved $50? We can guarantee that when you need new drivers for the next OEM software update that the China built NEXIQ USB Link will not work with the driver updates.

Nexiq’s next-generation NEXIQ 2 vehicle interface is designed to be five times faster than its predecessor and to support heavier bus loads on simultaneous channels. A Bluetooth module with an enhanced data rate has been added to support wireless vehicle-to-PC communication, while the USB connector now is built with a more robust automotive-grade connector and a latching mechanism for increased reliability.

ATEQ VT55 OBDII software is compatible for all Asian and European vehicle brands that require OBD synchronization and its software is updateable by using a standard USB cable connected to a PC. Our very simple PC interface guides the user through a minimal number of steps. An upgradable TPMS tool has never been so important as new Tire Pressure Monitoring Sensors are being fitted to new car models at an increasing rate.

What’s the Advantage of Nexiq USB Link 2

NEXIQ USB Link 2 is multi-brand truck diagnostic tool,it includes:volvo,cummins,Bendix, Allison .etc truck software.NEXIQ Support Heavy-Duty, Light-and Medium-Duty Trucks, CONSTRUCTION EQUIPMENT like (Wheel loader, Articulated Hauler and Excavator), Genset.
NEXIQ-2 USB Link
What’s the Advantage of OBD2TOOL Nexiq USB Link 2  ?
1.Fives time faster than its predecessor (125032)
2.Sixteen times more RAM (random access memory)
3.Supports heavier bus loads on simultaneous channels
4.New Bluetooth module with enhanced data rate to support wireless communication (500K b/s on J1939)
5.USB connector is a more robust, automotive grade quality connector with latching mechanism

Description of Nexiq USB Link 2
Class 1 Bluetooth provides up to 100 ft. of wireless freedom
Flexible configuration supports wired or wireless connectivity
Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more
Reduce reprogramming times with direct USB connection
Mixed fleet capabilities with broad protocol support

The NEXIQ 2 the next generation vehicle interface from NEXIQ Technologies, has arrived. Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels.

What is a Drive Cycle in OBD-II?

Drive Cycles are a warm up sequence that the vehicle must complete to allow conditions for all of the onboard tests.  When codes are cleared, so are diagnostic results, this means that if you are going for an emissions test and you have a fault code, if you clear the code just before the test, there will be not only a Distance since DTC Cleared setting, but your vehicle will not have ran through several drive cycles which are required and your vehicle will fail by default.

There is a flaw in the NEXIQ USB Link 2 driver installer that causes any J1534 compliant software to look in the “WINDOWS” folder for the dll files, if your windows folder is called WinXP, Win7, WINNT or any other name, PF-Diagnose is fine but the Nexiq driver will fail to load.  This is known by Nexiq and is to be corrected in the latest driver install, I recommend you install the latest Nexiq drivers or .contact Nexiq.  This is a Nexiq problem.  Pocketfleet is not a Nexiq Distributor. if you have one of our approved adapters by DG Technologies, you will not have this issue.

There are 2 main scan tools used for GM vehicles, the GM Tech II handheld and the MDI-2 GDS2 laptop based system. From 1992 to 2009 + certain newer vehicles,  GM vehicles use the Tech 2 handheld scan tool.The Tech 2 is the same scan tool as is used also for GM, Saab,
Izusu, Suzuki and Saturn including the Saturn Astra (Opel import).

The Tech 2 scan tool simply uses different 32 MB software cards which are removable and switchable. We are lucky it is so versatile. Extra memory cards which cost an average of $449.00 allow us to expand our diagnostic capabilities really cheaply.

The automotive diagnostic equipment Tech 2 scan tool is also used for reflashing GM vehicles.It uses a serial adapter with a network cable to connect the tech 2 to your laptop. NOTE  a serial adapter is used on the laptops 9 pin serial port.DO NOT try to connect the tech 2 directly to your laptop with just a network cable. IT WON”T WORK.

A way to remove NEXIQ USB-Link 2 with Advanced Uninstaller PRO

NEXIQ USB-Link 2 is a program offered by the software company IDSC Holdings, LLC. Some computer users decide to erase this application. Sometimes this is troublesome because deleting this manually requires some experience regarding Windows internal functioning. The best QUICK manner to erase NEXIQ USB Link 2 is to use Advanced Uninstaller PRO. Here is how to do this:

1. If you don’t have Advanced Uninstaller PRO already installed on your Windows system, install it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and all around utility to maximize the performance of your Windows computer.

2. Run Advanced Uninstaller PRO. It’s recommended to take some time to admire the program’s interface and wealth of features available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Press the General Tools button

4. Click on the Uninstall Programs feature

5. All the programs installed on the computer will appear

6. Navigate the list of programs until you locate NEXIQ USB-Link 2 or simply click the Search feature and type in “NEXIQ USB-Link 2″. If it exists on your system the NEXIQ USB-Link 2 program will be found automatically. When you click USB Link 2 in the list of programs, the following information about the application is shown to you:

7. Click the Uninstall button. A window asking you to confirm will come up. Confirm the removal by pressing Uninstall. Advanced Uninstaller PRO will then uninstall NEXIQ USB-Link

8. After uninstalling NEXIQ USB-Link 2, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to proceed with the cleanup. All the items of NEXIQ USB-Link 2 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Auto Scanner Tools NEXIQ USB-Link 2 using Advanced Uninstaller PRO, you can be sure that no registry items, files or directories are left behind on your computer.

This is the GM factory scan tool used in all GM dealers since 1996. Model coverage includes all makes and models of GM vehicles including passenger cars, trucks and vans. Model year coverage is from 1992 to 2013. For GM vehicles prior to 1992 you will need a Tech1A or a MasterTech listed below to achieve OEM level functionality.

The GM Tech 2 Scanner will allow your shop to be to ‘dealer level’ capable on all covered GM cars. Scan, pull codes, graph data and have all bi-directional controls available for all vehicle systems including Powertrain, Body, Chassis and Network. This tool will also allow you to re-program controllers with the optional TIS-2-Web program.