SKP900 Install Driver

For the first time to connect your device with PC via a USB cable, the computer screen will remind you install the SKP-900 USB driver as follow:


Change selection->






Browse the USB driver folder->




Continue Anyway->

Click Finish, wait about 2 seconds->

Change select->






Click Continue Anyway->


Click Finish.


Installation finished.

Three steps to add Mitsubishi Pajero new key by SKP900

This blog is going to tell you SKP-900 key programmer can add new key for Mitsubishi Pajero in just one minute! It’s amazing and please read down below steps.

Step1. Start SKP-900 SKP900 then choose “Immobilizer”→ “Mitsubishi”



Step2. Choose “System Type” and “Type 1” and “IMMO System”. Next is to turn on the ignition.


Step3. Choose “Key Adapt” and input the authorize code.

9-5 9-6

It will show “Key Program Success”. Press YES button and insert the new key in 5 seconds then turn ignition on.

9-7 9-1

And Auto Key Programming SuperOBD SKP900 now make new key for Mitsubishi Pajero successfully in 1 minute!

Superobd SKP900 programs smart remote Nissan Sylphy 2013 year

This post shows how to use Superobd SKP900 program smart remote Nissan Sylphy 2013 year.


Calculate Pin code and then program smart remote key


1.This is smart remote key …


2.Turn ignition on


3.Open OBD2 Programmer Superobd SKP900, come to menu then choose “Nissan” under IMMOBILIZER.


4.Select “New Structure”.


5.Select “Smart key”, loding…




7.Get message “Choose OBDII adapter Yes to continue”, turning on then press YES.

8.Read BCM code


9.Insert key and turnning on “Yes” to continue


10.Read out BCM code

11.Use Nissan Calculator to find Pin code.


12.Read out PINCODE: 2166 (cause our car after 2009 year) by Nissan Calculator


13.Use pin code: 2166. Back to “Function Selection” then select “Activate Steeling Lock”, press

“Yes” button.


14.Get message “If keyless want activate steering wheel, first turn IGN off “Yes” Continue.

15.All keyless will be deleted.


16.Enter Pincode 2166


17.Check INPUT VALUE 2166 “Yes” OK “No” Return.


18.Activate success wait new keyless.


19.Key number 1 and number 2


20.Register KEY Number 1, put key number 1 on Smart button and press 1 time. Security light blink 4 times. Key LED steady. Press smart button to off.


4-21 4-22 4-23

21.Put key number 2 on Smart button and press 1 time.Security light blink 4 times.Turn IGN off.

22.Use key number 1 turn on again. Turn IGN off. Press brake pedal then press to start.

Engine can start. Turn IGN OFF. Open driver door and close, Key LED blink 5 times.


23.Test remote, it can work.


SKP900 Key Programmer Land Rover All Key Lost Car List

SuperOBD SKP-900 key programmer is advised for both experienced locksmith and car owners. It supports program Land Rover key when all key lost, many other brands as well. This blog will show you which models all key lost SKP900 support and how to do.

SKP900 Land Rover All Key Lost Car List:

SKP900 Support All Key Lost for These Cars (Tested):

2010-2015 Land Rover Discovery IV (L319)

2010-2013 Range Rover sport (L320)

2014-2015 Range Rover sport (L494)

2010-2012 Range Rover mark III (L322)

2013-2015 Range Rover mark IV (L405)

2012-2015 Range Rover Evoque (L538)

2012-2014 Land Rover freelander II (L359)

2010-2013 Jaguar XF (X250)

2010-2014 Jaguar XJ (X351)

How SKP-900 program key for Range Rover sport (L494) when lost all key?

First, Choose “Keyless Program”


It will show “Key quantity: 1” then press “Enter” button to continue.


After that press the “Unlock” button of new transponder key quickly in 5 seconds.


Then follow tips to repeat press key “Unlock” button.

It will show “Detected key place: 2”, press “Enter” button to continue.


Now Auto Key Programmer SuperOBD SKP-900 successfully add new transponder key for Range Rover sport (L494) lost all key.


This is from Best car key tools for sale website technical support: SKP900 Key Programmer Land Rover All Key Lost Car List

Difference between skp900 and skp1000 key programmer

skp1000 key programmer is work better than old skp900 key programmer.  their pictures as following:



what is the mainly difference between them ?

1.  their outside appearance is not same.

2.  Skp900 key programmer supports auto key programming ONLY!  but Skp1000 obd2 key programmer supports auto key programming + special functions!

3.  skp900 auto key programmer not support special functions, but skp1000 auto key programmer can support special functions. such as OBD mileage adjustment, remote controller, oil/service reset, throttle body adjustment, EPB, pin code calculation,EEPROM chip read, immobilizer initialization,EEPROM/PIC adapter,personalized settings etc.

4. SKP1000 will be compatibility for future cars,  SKP900 stopped production and never works for new models

skp1000 key programmer is easy to use, This is how to use SKP1000 key programmer:

connect the main cable to the SKP 1000 machine

plug the OBDII adapter to the car

power on the SKP1000 machine, until you see the LOGO

press [YES] to the main menu

choose “Immobilizer”


go to the SKP 1000 car list

choose a model: Hyundai, press “Confirm”


choose “Smart card”, press “Yes”


choose ” by car model”, press “Yes”


choose “SONATA 8 (with card slot), press “Yes”


choose “Smart card (with card slot), press “Yes”


follow the prompt on the screen to turn off ignition, press “Yes


open the door and close for one time, press “Yes”

choose smart card to match, press “Yes”


insert the smart card into the slot, and you can hear alarm sound, turn off the ignition, press “Yes”


input the password


check if the password is correct, press “Yes” to confirm


program the first smart card successfully

press “Yes” to program the next one

press “No” to complete key programming




SKP1000 tablet key programmer User manual


1. Product description


1.1 Supported protocol:

1.2 Package Includes:
1* Main unit
1* touch pen
1* main cable
1* Honda 3pin adapter
1* Kia 20pin adapter
1* Hyundai / Kia 10pin adapter
1* Haima 7pin adapter
1* power adapter
1* TF card
1* TF card reader
1* USB cable
1* CD with user manual

2. Menu Instruction


2.10 Main menu basic functions
Car functions
Choose ” Car functions” to perform immobilizer, mileage adjustment, remote controller,
Oil/service Reset, throttle body adjustment,?EPB, pin code calculation, personalized settings and special function


2.11 immobilizer function:
Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Read keys from immobilizer memory
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;

2.12 Mileage adjustment via OBD

2.13 New remote controller programming
2.14  Oil/Service reset

2.15 throttle body adjustment

2.16 EPB(Electric park brake)

2.17 Immo PINCODE reading
.Immo PINCODE reader?for many vehicles?and no need pincode when programming keys for many vehicles.


2.18 Personalized settings

2.19 Special functions
Plug into the adapter that paid extra money to perform special functions.

2.20 System settings
Choose ” System settings” to read the machine basic info.

2.21 Firmware upgrade
Choose ” Firmware upgrade” to update the machine firmware.





2.22 User program test
Choose “User program test” to reset the SKP1000 machine at to collect corresponding data.

3. How to use SKP1000 to program key on specific car model?
Step-by-step procedure:
For example, to operate Hyundai SONATA 8 smart remote controller, firstly connect the main cable to the machine, then plug the OBDII adapter to the car.
Power on the SKP1000 tablet key programmer machine, until you see the LOGO, press [YES] to main menu, Choose “Immobilizer”, press “Confirm” to vehicle list.




Choose model: Hyundai, press “Confirm” to enter.
Choose “Smart card”, press “Yes” to enter.
Choose ” by car model”, press “Yes” to enter.
Choose “SONATA 8 (with card slot), press “Yes” to enter.
Choose “Smart card (with card slot), press “Yes” to enter.
Follow the tip to turn off ignition, press “Yes”
Follow the tip to open the door and close for one time, press “Yes”.
Choose smart card to match, press “Yes”
Follow the tip, insert the smart card into the slot, and you can hear alarm sound, turn off the ignition, press “Yes”.
Input the password
Check if the password is correct, press “Yes” to confirm.
The first smart card program successfully, and it will ask you if you program the next one, press “Yes” to confirm.
Insert the second smart card into the slot, you can hear the alarm sound, press “Yes”.
Program successfully, press “No” to back.
With two new smart card keys, you could start the car, if you need to add more keys, just repeat the above steps.

4. Firmware update
Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click “My Computer”, find out ” local Disk (H:), right click to choose “Format”.


Tip: Tick on the “Quick format” and click “Start.
After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.

Click on “Firmware update”.


Firstly choose “System firmware update”, press “Yes”, the procedure shown as below:

Update successfully shown as below.


Press “No” to back.

Choose ” Adapter firmware update”, after finish, reboot the machine to go on use Auto Key Programmer SKP1000.


Any question, please contact your supplier.

(SKP-900 Update) How to update SuperOBD SKP900 Key Programmer?

Do you need a clear tutorial for SuperOBD SKP900? This blog will guide you How to update SuperOBD SKP900 Key Programmer step by step! Check below!

Step1. Download newest software from SuperOBD official website or

Download SKP900 Update Tool V2.4:

Download SKP900 USB Driver:

Step2. Connect SKP-900 key programmer to computer using the USB cable.

Register SKP-900 official website in member centre. Download the update software and unzip it to get the “update bin file”.

Step3. Extract car key programmer SKP900 Update Tool V2.4 zip file and SKP900 USB Driver zip file. Now install SKP900 driver: go to “My Computer” → “Properties” → “Hardware” → “Device Manager”

The USB serial will not be found now. Click the “Scan” button to scan the hardware.

Step4. You will see a Found New Hardware Wizard for “USB-Serial”, click “Next”.

Check the checkbox “Include this location in the search” then click “Browse”. Choose “USB driver” folder then click “OK”.

Click “Next” then “Finish”.

Step5. There comes another Found New Hardware Wizard for “USB Serial Port”, choose the option “Install from a list or a special location”, click “Next”.

Click “Browse”, choose “USB driver” folder then click “OK”. Click “Next” then “Finish”.

Now SKP900 USB driver install completely.

Step6. Open Car Scanner SKP900 Update Tool V2.4 folder then open SKP900 Update Tool V2.4.

Open the update bin file then click “Update” to start SKP900 update. (Remember not to disconnect SKP-900 form computer while updating.)

The whole process will cost about 37 minutes, just be patient to wait it complete. And after that all OK, you can start to use newest SKP900 software!

(How-to guide) SKP900 program Honda CRV key when all key lost

SKP900 key programmer is Hand-held OBD2 key programmer,supports all key lost for many different car brands. This blog will show you how SK-P900 program Honda CRV key when all key lost.

Step1. Choose “Immobilizer”→ “Honda”→ “System Type”→ “Immobilizer 2”.

Step2. Choose “Immobilizer System” and turn ignition on. Wait a minute for system adapting.

Step3. Choose “All key lost”

It will ask “Insert key and turn ignition on, indicator light off?” Check and confirm it.

Step4. Input key number: 2

Turn off the key then turn ignition off. It is programming.

Step5. Turn key off in 15 seconds and SuperOBD SKP-900 Key Programmer will show “Adapt success”. Insert a new key in 15 seconds and turn the ignition on.

Turn off key in 15 seconds→ turn ignition on→ turn off key→ turn ignition on

Then the indicator light is off

Turn off key→ turn ignition on

Now it will show “Adapt key success” that meansSKP900 successfully program Honda CRV key when all key lost!

How SKP900 read pin code& program key for VW Bora all key lost?

What tool do you need when a VW Jetta Bora lost all key and want to program a new key? According to engineers you are advised to use SKP 900 Key Programmer from! Below is how-to guide for your reference.

First use SuperOBD SKP-900 Key Programmer to read VW Bora pin code then to program a new key.

Step1. Turn ignition on and connect SKP900 with car via OBD port. Choose “Immobilizer”→ “VW” → “Read Pin code1” → “Password Reading SYS1”

Wait a minute and SKP900 read out the pin code as 3904.

Step2. Back to “VW” menu and choose “Jetta 10-”.

Choose “Immobilizer System” then “Yes”. It will show you car control computer info, click “Yes”.

Step3. Choose “Program Key”

Enter the pin code 3094 and confirm.

It will show current key number: 1

Input key number to be programmed: 1

Step4. Now use all matching keys to turn on ignition. It will soon show “Matching Finished”.


In this way you can use OBD2 key programmer SKP-900 Auto Key Programmer to program a new key for VW Bora all key lost situation!