Tag Archive: Tech 2 Programmer

Control Module Stand-Alone Programming Adapter (J-45211) for Cadillacs

The J-45211 control module stand-alone programming adapter (Figure VIIC-41), also called the PCM programming adapter harness, is used to connect the Tech 2 to a vehicle’s PCM and perform SPS functions for the 2000 or later Cadillac models DeVille, Seville,…
Read more

GM Tech2 Initial Hardware Installation

The GM Tech2 hardware initial installation requires the following seven tasks: 1.  Remove the RS-232 loopback adapter (P/N 3000112) from the storage case (P/N 3000116). Plug it into the RS-232 port. 2.  Attach the Tech 2 DLC cable (P/N 3000095) to…
Read more

Unlock Chevy TrailBlazer radio using GM Tech2 scanner

I have successfully unlocked the radio on my Chevy TrailBlazer with a clone Tech 2 Scan Tool from China yesterday. Here I would like to share the procedure. If you also like to unlock the radio, please complete the following procedure,…
Read more

How to Program Cadillac key fob with GM Tech2 clone

This is an instruction on how to program key fob to 2007 Cadillac CTS-V using a Tech 2 Scanner Tech II scanner. Model: 2007 Cadillac CTS-V The process…here you go… The key to be programmed Insert the key and ignition on…
Read more

GM Tech2 clone program ECU with SPS in TIS2000

Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech2 scanner and SPS (Service Programming System) application in TIS2000. NOTE: Before using the SPS, make sure that the GM Tech 2 Scan Tool and the pc contain the…
Read more

How to solve 2009 Saab 9-3 1.9 TID non starter by GM TECH 2 ?

This post starts with the problem that 2009 Saab 9-3 1.9 tid no starter, then how to solve? Please go on reading following parts. Car model and year: 2009 Saab 9-3 1.9 tid General Car issue: non starter Tool I…
Read more