The Tech 2 hardware initial installation steps

1.  Remove the RS-232 loopback adapter (P/N 02001606) from the storage case (P/N 02002971). Plug it into the RS-232 port.

20-1

2.  Attach the Tech 2 DLC cable (P/N 02002952) to the VCI connector.

20-2

3.  Locate the DLC loopback adapter (P/N 02002953) in the storage case. Attach it to the DLC cable.

20-3

4.  Locate the NAO (P/N 02002972) power supply and appropriate power cord in the storage case. Insert the power jack into the Tech 2 DLC cable or into the bottom of the Tech 2 next to DLC cable connector.

20-4
20-5

5.  Turn on power by pressing the PWR button located on the GM Tech 2 key pad.

6.  Car diagnostic scanner Tech 2 hardware is verified automatically by the POST Test.

20-6

7.  Disconnect the RS-232 loopback adapter, the power supply, and the DLC loopback adapter and return to the Tech 2 storage case.

20-7