(Solved) ODIS-S 4.3.three Error ODS9011E on Windows 7

Download VAS 5054AODIS-S 4.three.three on Windows 7 but had a problem:

Update file missing

ODS9011E

Infrastructure VW on-line connection. MirrorServer2:

The update just isn’t complete.

All required updates will not be obtainable.

Please speak to assistance.

22 22-1

I located a answer to resolve it by editing the lic. file – so that just vag “basic” merchandise are valid/active…. but you have got to provide this file to the installer in the course of the procedure, just swapping inside the offboard folder hasn’t solved my issue…

And after that, obviously there’s no full activation and not all brands but it appears you could run odis four.3.3 using the “basic vag brands” and with this installer plus the existing postsetups

Hopefully, guss could resolve this “problem” for us, to ensure that we’re totally activated with all the brands then

22-3

VAS 5054A ODIS 3.0.1 Error Executing Updates Solution

Useful tips are listed here for VAS 5054A ODIS 3.0.1 “Error Executing Updates”. Hope this helps
Some users may be required to update ODIS all the time when installing ODIS 3.0.1. and ODIS will stop to run if they click Cancel.Error message in German ‘Tehler beim Ausfuhren des Updates OD59007E
Infrastrucktur.VW Online-Verbindung.Mirror5ever2:
Die Aktualisierung ist fehlgeschlagen oder wurde abgebrochen ODS4010E InterL Die Datenstruktur Executable retcode….”
(Error in English:
Error executing Updates OD59007E
Infrastructure. VW online connection. Mirror Server 2:
The upgrade has failed or was canceled
QDS4010E Interl The data structure Executable retcode ….)
VAS 5054A With OKI Chip VW ODIS V3.0.1 Plus Dell D630 laptop ready to Use
Possible occasions for unsuccessful installation:
1- do not pay attention to ODIS installation video offered by obd2tool.com Language setup: ODIS will automatically prompt the language; just click Next.
Video guide: ODIS 3.0.1 installation:
Customer feedback:
i did uninstall and reboot mounted the iso file and look here: \Postsetup\lnstallation\Clean in the dvd there u see
Clean_Reg_VWMCD_Full.bat
Clean_Reg_VWMCD.bat
Clean_PDU」only_035).bat
Clean_PDU」at_034}.bat
i ran all of this bat files and rebooted , mounted Postsetup 9.0.10.iso with poweriso and ran OD;S_S_v300_5etup.exe from t he dvd
\Postsetup\lnstallation
and then used the patch licence and loader from Patch License directory
and after that just ran the postsetup to update and it is working 100% even with my clone vas5054a dongle
this odis version wants a clean install all old data from previous version must be removed that is where the bat files is us
ed for otherwise. your ODIS software would be corrupt.

VAS 5054A ODIS 3.0.1 Error Executing Updates Solution

Useful tips are listed here for VAS 5054A ODIS 3.0.1 “Error Executing Updates”. Hope this helps
Some users may be required to update ODIS all the time when installing ODIS 3.0.1 at www.obd2tool.com. and ODIS will stop to run if they click Cancel.Error message in German ‘Tehler beim Ausfuhren des Updates OD59007E
Infrastrucktur.VW Online-Verbindung.Mirror5ever2:
Die Aktualisierung ist fehlgeschlagen oder wurde abgebrochen ODS4010E InterL Die Datenstruktur Executable retcode….”
(Error in English:
Error executing Updates OD59007E
Infrastructure. VW online connection. Mirror Server 2:
The upgrade has failed or was canceled
QDS4010E Interl The data structure Executable retcode ….)

Possible occasions for unsuccessful installation:
1- do not pay attention to ODIS installation video offered by worldobd2.com Language setup: ODIS will automatically prompt the language; just click Next.
Video guide: ODIS 3.0.1 installation:
Customer feedback:
i did uninstall and reboot mounted the iso file and look here: \Postsetup\lnstallation\Clean in the dvd there u see
Clean_Reg_VWMCD_Full.bat
Clean_Reg_VWMCD.bat
Clean_PDU」only_035).bat
Clean_PDU」at_034}.bat
i ran all of this bat files and rebooted , mounted Postsetup 9.0.10.iso with poweriso and ran OD;S_S_v300_5etup.exe from t he dvd
\Postsetup\lnstallation
and then used the patch licence and loader from Patch License directory
and after that just ran the postsetup to update and it is working 100% even with my clone vas5054a dongle
this odis version wants a clean install all old data from previous version must be removed that is where the bat files is us
ed for otherwise. your VAS 5054A ODIS software would be corrupt.

VAS 5054A ODIS V2.0 with OKI Chip, UDS Protocol Bluetooth Supported

VAS 5054A ODIS V2.0 with OKI Chip, UDS Protocol Bluetooth Supported

Highlights:
1. With OKI Chip it can support UDS Protocol.
2. Six Models supported: VW/AUDI/SKODA/SEAT/Bentley/Lamborghini
3. Multi-language available: English, Chinese, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russian, Greek and Polish.
4. Easy to use: No cables are needed for vehicle diagnostics using the VAS 5054A.

System Requirements:
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 40GB space for installing VAS5054A

Description:
1. The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
2. The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
3. The range of the wireless Bluetooth connection is 2 to 5 meters with no interference or blocked, depending on the environment and the type of Bluetooth adapter used on the PC side.
4. The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported

The new chip AN2135SC/AN2136SC solved communication issues of other CLIP versions. That make CLIP work more stable and can be used for a longer time. Using other versions of Renault CAN Clip Diagnostic Interface, the diagnostic interface will disconnect if users have no operation for 10 minutes around after successful communication to the car. With this new CAN CLIP for Renault, the issue solved, with the chip AN2135SC/AN2136SC. This is the PCB with new design.

VAS 5054A FAQ:

VAS 5054A FAQ:

Q: VAS 5054A Bluetooth can be used to reset service light, VAG K Can V4.6 can’t support service reset for Audi car? In what functions and features 5054A is better than VAG K+CAN 4.6?

A: VAS5054A  has stable function and good performance in diagnosing. VAG K Can V4.6 can work without connecting with computer, it is convenient and simple to use. Super VAG K+CAN V4.6 can be used to reset airbag light and active TV for a part of car models.

Q:Can VAS 5054A disable immobilizer like EC tools?

A:No, it can’t disable immobilizer; our 5054A only support reset every electronic control system in the car.

Q:Over the last couple weeks the car’s been giving me some trouble starting up. It starts, revs to 1200 briefly and then cuts out. My initial thought was it just had to Do with the cold weather lately and remedied I by just holding the key a bit longer in the on position. Today though, I had to actually give it a significant amount of throttle to keep from cutting out when starting. Then it died at two intersections. It starts up fine again, but I’m stumped as to what the issue might be. My initial thought is the fuel pump. Anything else it could be?

A:VW / Audi / Skoda … blink codes, trouble codes (VAG), fault codes (Ross), tomato, potato. All I can tell you is the Master Tech who does side jobs on my cars uses a 5054A ODIS V3.0.1. With the right cables / software it pulled the trouble codes for the ABS in my ’90 Corrado to condemn it. It’s been a long time since I actually counted those blinks to diagnose. The point is it’s all the same info whether it blinks a led or displayed as text with graphics on a screen (my preference).

Q:I found this VAS 5054a software and bluetooth can obd2 interface. Is this a ligit vas program? and will it do the same or more as the ross tech software?

A:Now if you use 5054 you can get the automated diagnosis on any fault code more than Ross tech can support! And it is cheaper than Ross tech and easy to update too.

Q:Light stays on and vcds will NOT clear it? I used Win XP when I installed Vagcom 11.11. Any idea?

A:You would need VAS-PC and a 5054a Head to enter into in the basic setting / adaption of the module which I’m guessing you don’t have. That’s what the dealer will do though.

Q:I got my tester with Best obd2 scanner VAS 5054A ODIS and this is what I found when i tested the car:
P1626 Databus Drivetrain Missing message from trans ctrl mod.They are no errors in the transmission control module, only in both ECU’s. How to fix?

A: it’s a static message, ie it is not currently fault-free. There will be more information available from a paid-for VCDS scanner cable together with a laptop, if that’s an option for you. This is because a regular OBD-II scanner only reports emissions information and not the car computers’ diagnostics information, such as open circuit wires.

Q:I have the latest Vag Com and Ihave VAS 5054A.I disconnected the speedo for a short while and when i put it back it triggered the immobilizer and the car will not run now for more than a few seconds. It seems the speedo lost its link to the keys and they need to be rematched. I do not want to take it to Audi. I have taken a full dump of the eeprom (G93LC86C) but would need to know which addresses are the 4 digit PIN. Does anyone know how to obtain this – either by finding it in the eeprom dump or using some piece of software or hardware, or can i get it from a login to GeKo?

A:Pull out your radio (takes 10 minutes), write down the s/n#, and ask the service manager really nicely, and they should give you your code for free.