Hi my dear friend, how are you ? Today we’d like to share with

The Key Pro M8 Key Programmer How to Recharge Token

Following with us , let’s show you the detail steps:

Steps:

1. After you place order on our website, please also leave us the serial number and password of the key Pro M8. We will ask our engineer to recharge it online in one day.

2. Connect M8 Pro to your computer by USB Cable and make sure your computer is connected to internet. Then update and recharge tokens. Please make sure the internet signal is good and stable.

3. Start the M8 Pro. When you start it, your computer will prompts you “find new hardware”. Please click “Install from a list or specific location (Advanced)”, and then click “Next”.

4. Please tick off “Search for the best driver in these locations” and “Include this location in the search”, and then click “Browse” to choose a installation location. Choose the driver location “browse for Folder” then choose Desktop-“The key pro (M8) driver-OK”.

5. When install driver please choose “continue anway] until you finish installing the driver.

6. After device connected to computer, please start “M8 Tool.exe” (this software we will send you online or you can find it in the M8 cd), input serial number and machine start password, and input the token number you bought (50, 100 or 250). Then click [Update].

7. Wait until update finish. Please do not disconnect from internet or power when updating. If you encounter any error, please contact us.