New test report: successfully added a remote key on a Opel Astra J 2015 using Lonsdor K518ISE Key Programmer

Note: Pin code is required. You can also read pin with Lonsdor.

Connect K518 host with vehicle via OBD socket

Select Immobilizer->Opel->IMMO->Astra->Astra J->2010-2016->Immobilizer

Read key number

Turn on ignition switch

K518 identified current number of keys: 2

Select Add key function

Close all doors and turn on ignition switch

Lonsdor K518 required to enter 4-digit PIN and confirm

Configuring system,wait for 10 minutes

Turn ignition off and remove key

Insert key to be programmed and turn on ignition

Configuring system

Turn off ignition and remove key

Open and close driver door, make sure all the electrical appliances are off

Turn on ignition switch

Program successful

Turn off ignition and remove key

Open and close driver door, make sure all the electrical appliances are off

Configuring system,wait for 45 seconds

Turn ignition to ON position

Turn off ignition

Turn on ignition switch again

Program completed

Test remote

Start engine

Done.