Posted in ECU Programmer

How read Peugeot Boxer ECU Visteon DCU-102 with KTAG Master

   Published Date: September 5, 2017  Leave a Comment on How read Peugeot Boxer ECU Visteon DCU-102 with KTAG Master

Here this blog will show you how use KTAG Master to read Peugeot Boxer ECU Visteon DCU-102 (FOCOMO) in boot mode step by step!

ECU Type:

Visteon DCU-102 sometimes called FOMOCO.

Same unit and procedure applies to PSA, Ford and Fiat vans. In this case car is a Peugeot Boxer. No resistors required.

24-1

Tool you need:

KTAG ECU Programming Tool

K-TAG read ECU Visteon DCU-102 procedure:

Step1. Take out the Car ECU Programmer unit and heat the unit edges to open it safely.

24-2

Step2. Connect ECU with KTAG according to following pin out diagram:

24-3

24-4

24-5

24-6

24-7

Step3. Connect KTAG with computer then open ksuite software. Click the car icon and choose “Peugeot” and “Boxer III”. Then choose ECU: Visteon DCU102 KW 74 HP 11.

24-8

Step4. Click “Read” to start.

24-9

Wait the process complete to 100% and OBD2TOOL KTAG ECU Programmer read ECU Visteon DCU102 successfully! Now you can save the bin file.

24-10

Related posts:

  1. FAQs about KESS V2 V2.15 OBD2 Tuning Kit
  2. Notes on using KTAG K-TAG ECU Programming Tool
  3. Ktag Kess unlock CRP3 LPC2478 via J-link (Pinouts attached)
  4. KESS V2 WARNING the tool is not updated

Author: Eva

Leave a Reply

Your email address will not be published. Required fields are marked *