Tag: BMW Engineer Software
How to do BMW G Series Coding with BMW ICOM cable
Topic: How to do BMW G Series Coding with BMW ICOM cable I’ve collect all useful tips of BMW G series coding on the web and…
How to solve the problem that BMW Icom A2 A3 host can’t be connected?
Aftre the BMW ICOM host is connected to the car via a 16PIN connector, and the other side is connected to the computer via a…
Solved BMW ISTA error IFH-0010, Vehicle could not be identified
This blog list 3 kinds of bmw diagnostic scanner ISTA errors and solutions you may need. ISTA NCS error IFH-0010+ solution ISTA error”MSVCP120.dll is missing”+ solution…
How to use WinKFP for FRM3 flash
This WinKFP job was done with BMW ICOM A2 emulator for FRM3 flash after FRM3 repair/reflash by Xprog-m or other programmer the like. After FRM3 was…
(Fixed) BMW ICOM A3 program ok but fail to diagnose
Question: BMW ICOM A3 Program ok but diagnose with no luck, device fail to connect. How to do? bmw icom diagnosis Possible reason: The hardware…
Learn much about BMW ICOM & ICOM A2
Learn it from an experienced technician. I consulted ICOM A2 from the professional technician mainly because I read much information in BMW forums telling that the…
How to save ISTA-D BMW Diagnostic Operations and Tests?
I have installed New BMW ICOM software ISTA-D (3.48) on my laptop. It works well and could read the error codes and perform tests. It seems…
Feedback on BMW F22 M235i Coding Adventure with E-sys cable
Days ago, I used the new ENET cable to manage to do some coding on BMW F22 M235i. Then, i share my coding adventure on…
How To Modify VO (Vehicle Order) with ICOM NCS Expert
This is the instruction on how to change vehicle order (VO) with NCS Expert, on BMW vehicles except F series. VO modify tools: ICOM A2…