Tag: GM Tech 2 Scanner
GM TECH2 program DDM, enable comfort opening closing and learn pinch
Device to use: GM TECH2 Security via TIS2000! Without this you won’t be able to add anything!!! I bought GM Tech 2 $358 (shipping not included),…
Customer real experience with GM Tech 2 Scanner (Review)
Here is the my real experience on gm tech 2 Scanner from obd2tool.com Bought the highest quality version as i didn’t want to risk any issues…
The Tech 2 hardware initial installation steps
1. Remove the RS-232 loopback adapter (P/N 02001606) from the storage case (P/N 02002971). Plug it into the RS-232 port. 2. Attach the Tech 2…
What’s Tech2 TIS2000 hardwaresecurity key used for
I have a question about the gm tech2 hardware/security key. What exactly is the purpose of it? I don’t have one, and was wondering if…
GM Tech2 for ALL systems – HP Tuners only for ECM & TCM
What is GM Tech2: The GM Tech2 Scanner, working with TIS2000 software, supports onboard diagnostics and full bi-directional control when performing powertrain, chassis and body…
same problem as recording images to the memory card via the Tech 2 and TIS
Hello everyone. A few days ago saw that often face the same problem as recording images to the memory card via the Tech2 Scan Tool and…
What can I do with a GM Tech2 on Chevrolet C5
This is a write-up for those with a GM Tech 2 Scan Tool on Chevrolet C5 Tech 2 scanner is a diagnostic tool for the most…
Control Module Stand-Alone Programming Adapter (J-45211) for Cadillacs
The J-45211 control module stand-alone programming adapter (Figure VIIC-41), also called the PCM programming adapter harness, is used to connect the Tech 2 to a…
GM Tech2 Initial Hardware Installation
The GM Tech2 hardware initial installation requires the following seven tasks: 1. Remove the RS-232 loopback adapter (P/N 3000112) from the storage case (P/N 3000116). Plug…
Unlock Chevy TrailBlazer radio using GM Tech2 scanner
I have successfully unlocked the radio on my Chevy TrailBlazer with a clone Tech 2 Scan Tool from China yesterday. Here I would like to share…