Tag: Tech 2 Diagnostic
GM Tech2 for ALL systems – HP Tuners only for ECM & TCM
What is GM Tech2: The GM Tech2 Scanner, working with TIS2000 software, supports onboard diagnostics and full bi-directional control when performing powertrain, chassis and body…
same problem as recording images to the memory card via the Tech 2 and TIS
Hello everyone. A few days ago saw that often face the same problem as recording images to the memory card via the Tech2 Scan Tool and…
What can I do with a GM Tech2 on Chevrolet C5
This is a write-up for those with a GM Tech 2 Scan Tool on Chevrolet C5 Tech 2 scanner is a diagnostic tool for the most…
Control Module Stand-Alone Programming Adapter (J-45211) for Cadillacs
The J-45211 control module stand-alone programming adapter (Figure VIIC-41), also called the PCM programming adapter harness, is used to connect the Tech 2 to a…
GM Tech2 Initial Hardware Installation
The GM Tech2 hardware initial installation requires the following seven tasks: 1. Remove the RS-232 loopback adapter (P/N 3000112) from the storage case (P/N 3000116). Plug…
Unlock Chevy TrailBlazer radio using GM Tech2 scanner
I have successfully unlocked the radio on my Chevy TrailBlazer with a clone Tech 2 Scan Tool from China yesterday. Here I would like to share…
How to Program Cadillac key fob with GM Tech2 clone
This is an instruction on how to program key fob to 2007 Cadillac CTS-V using a Tech 2 Scanner Tech II scanner. Model: 2007 Cadillac CTS-V…
GM Tech2 clone program ECU with SPS in TIS2000
Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech2 scanner and SPS (Service Programming System) application in TIS2000. NOTE: Before using…
How to solve 2009 Saab 9-3 1.9 TID non starter by GM TECH 2 ?
This post starts with the problem that 2009 Saab 9-3 1.9 tid no starter, then how to solve? Please go on reading following parts. Car…