Tag: Tech2
The Tech 2 hardware initial installation steps
1. Remove the RS-232 loopback adapter (P/N 02001606) from the storage case (P/N 02002971). Plug it into the RS-232 port. 2. Attach the Tech 2…
GM Tech 2 Scanner Program TCM Buick Enclave 2008
Hi, all. Today www.obd2tool.com would update tech 2 scanner tested reports, which GM Tech2 was used to program transmission control module (TCM) for my Buick Enclave…
Is it OK to get a clone GM Tech2
Is it OK to get a clone GM Tech2 from Obd2tool.com? Work as a real Tech 2? I hope this review can help someone with…
SAAB can’t start after Heat Engine Flameout
Fault: A SAAB car has run about 50 thousand km. After the heat engine flameout the car couldn’t start again. Check: After testing, the starting…
(Review) How do I use GM TECH2 to replace Opel Corsa C ECU
This article is just sharing real experience when use GM Tech2. Hope this helps someone. I decided to invest in some tools to diagnose my…
China GM TECH 2 does everything a real Tech 2 does, how?
China GM TECH 2 does everything a real Tech 2 does, how? 10-06-2014 Update: I just placed my order GM TECH2 which is the complete…
(Review) How do I use GM TECH2 to replace Opel Corsa C ECU
This article is just sharing real experience when use GM Tech 2. Hope this helps someone. I decided to invest in some tools to diagnose…