wiTECH VCI Pod wins wiTech MicroPod 2 in the built-in DRB III emulator ( which is far more stable). wiTech MicroPod two is claimed to work fine with the DRB III emulator, but not contained inside the package you will need to obtain your very own.
For Programming:
Chrysler wiTech MicroPod 2 wins in on line and offline programming etc.
wiTECH VCI Pod wins in crucial programming.
118.four MB
*** Please use the free source at your own personal danger, nobody will take responsibilities for any danger.
For sake of security, you will be advised to work with the stable a single wiTECH VCI Pod with built-in DRB III emulator or obtain your own 1 to function with the low-cost wiTech MicroPod 2
What is DRB III emulator?
DRB III Emulator may be the exact scan tool application application made use of in Chrysler, Jeep, and Dodge dealerships to service non-CAN primarily based vehicles from 1998-2007. The DRB III Emulator application application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to allow all the functions on the original Chrysler DRB III Scan Tool and much more. This application package even comes with non-powertrain ECU programming files to allow reflashing all the things from BCMs to sliding door modules.
The best way to set up DRBIII Emulator?
For making use of DRBIII Emulator application with tools like VCI pod or Micropod II with witech version 14.xx.xx – 17.xx.xx, it depends upon your device (clone or orig / old or newer release) and ONLY Right after that, set up DRBIII Emulator.
DRBIII-Emulator
Right here a Micropod II user who’re fortunate to obtain the package with DRBIII Emulator, and he shared his productive expertise on how to set up DRBIII Emulator.
1: Get started having a fresh install of Windows 7 Pro 32-bit.
2: Install all of the important drivers for your laptop.
three: Set the clock to the current date and time. (It didn’t perform when set to 01/01/2017)
4: Connect to WiFi and performed all necessary Windows Updates.
5: Copy the “wiTECH_Install_17.03.01” folder to the desktop.
6: Install the supplied version Adobe AIR.
7: Set up the offered version of Java.
eight: Install wiTECH 17.03.01.
9: Following you have got finished installed every thing, whenever you get popup messages from Windows Firewall to allow or block any applications, click “Allow”.
ten: After you get a popup for AdobeAIR and Java to update, click cancel and usually do not update either AdobeAIR or Java.
11: Open “My Computer” and inside the upper left of the window, click on “Organize” and after that select “Folder and search options”.
12: Click around the “View” tab and beneath “Hidden files and folders” pick the radio button for “Show hidden files, folders and drives”. Also, uncheck the choice for “Hide protected operating program files (Suggested)” and after that in the leading with the window, click the “Apply to Folders” button.
13: Navigate to “C:\ProgramData\wiTECH\jserver\data\core\stubs” and you’ll uncover three installers.
14: Set up the DRBIII Emulator stub.
15: Wait for a popup to appear that states the security certificate isn’t valid and click “OK” to let the software update to proceed. Another popup will seem and the software update will run. Following it completes, close the wiTECH window if it opens.
16: Set up the Enhanced DRBIII emulator stub.
17: Again, wait to get a popup to appear that states the security certificate is not valid and click “OK” to allow the application update to proceed. A further popup will seem along with the computer software update will run. After it completes, close the wiTECH window if it opens.
18: Install the K-Line stub.
19: Once more, wait for a popup to seem that states the safety certificate isn’t valid and click “OK” to enable the computer software update to proceed. Another popup will appear and also the application update will run. Immediately after it completes, close the wiTECH window if it opens.
20: Connect the MicroPod2 towards the vehicle, then connect it to the pc.
21: A popup window will seem to set up computer software. Click “OK”.
22: After it finishes, start wiTECH 17.03.01 and wait for the screen to show up with the MicroPod2 and IP address of it. You will see a “Launch DRBIII” button within the lower ideal corner. Ignore it as they don’t adequately open the emulator.
23: Produce a shortcut on the desktop and enter the following in to the ‘Path” field.
24: Disable the LAN and WLAN network connections and in no way connect to the web once more.
25: Click around the shortcut and you’re set! The Auto Scan Tool DRBIII emulator will open and give you the decision to choose various diverse cars.
More……
VCI Pod + DRB III Emulator Logging and Wireshark dump
