Guide to Install GDS2 and Tech2Win on VXDIAG VCX NANO

How to install and use GDS2 and Tech2Win on VXDIAG VCX NANO interface for GM quickly? Here is the latest guide to make it easier for you to understand.

Part 1: Install GDS2 software on VXDIAG VCX NANO interface

Part 2: Run Tech2Win

Part 3: Run GDS2 software

OS (Operation System):
1) GDS2: WIN7/8 64bit and install VMware player
2) Tech2Win: xp, win7 64bit or win8 64bit

In detail…

Part 1: Install GDS2 software on VXDIAG VCX NANO interface

1.Open DVD Drive (E:) GM-> Tech2Win folder-> AutoInstall

2.Install GM MDI software

3.Open GDS2AutoInstall folder and run the software

4.Run VX Manager

5.Enter VX Manager Setup Wizard

6.Select [1-PASSTHRU-J2534] and [9-GM-GDS/Tech2Win]

7.Install VX Manager successfully, uncheck [Run VX Manager] and [Visit website]

8.According to the connection diagram to connect vehicle and computer by VXDIAG VCX NANO device

9.When finish connection, it will prompt the device is ready to use.

Open the Device Manager to view the device driver

10.Run VX Manager to view the device version and authorization

Vxdiag-Vcx-Nano-Gds2-Tech2win-Install-11

Part 2: Run Tech2Win

Open Tech2Win software

Select [North American] and select the manufacturer you want to use

Select the corresponding car model you want to diagnose

Restart computer

Part 3: Run GDS2 software

Open GDS2 software

Select Language and then enter Diagnostics

Choose MDI2-> SN: 22124708

The software automatically recognizes the vehicle VIN

Click Enter for diagnose

Select vehicle model to read and clear DTC

Author: Eva

Leave a Reply

Your email address will not be published. Required fields are marked *