2017 Land Rover solution JLR DOIP VCI with Pathfinder or VXDIAG VCX NANO JLR

Topic: What Jaguar Land Rover diagnostic tool can work for Land Rover the 2017 year? VXDIAG VCX NANO for JLR Land Rover with SDD or JLR DOIP VCI with Pathfinder?

The answer is: BOTH OK. Both work for the 2017 Land Rover.
JLR DOIP VCI diagnostic tool running Pathfinder software works for Land Rover the 2017 year.
JLR DOIP VCI how much do you know?

What is JLR DOIP:
This is a unit compatible with Pathfinder and all JLR vehicles with new vehicle architectures (from Range Rover/Range Rover Sports (L405/L494) 17 MY onwards) or allow the enhanced diagnostics that Pathfinder will offer the retailer. In addition to the 17MY vehicle line application, the DoiP VCI will be capable of interfacing with the 14-16MY Multi-CAN architecture vehicle lines on the Pathfinder diagnostic system. Pre-14MY and vehicles not detailed here will continue to use the current diagnostic system and VCIs.

How to use Pathfinder software to read/clear fault codes:

Vehicle: Land Rover Range Rover L405 2007
Procedure:
Run Pathfinder

JLR-DOIP-VCI-with-Pathfinder-download-1

Enter user name and password to log in

JLR-DOIP-VCI-with-Pathfinder-download-2

Warnings:
To use this maintenance tool, you should agree with items below:
– you’ve already read Garage Maintenance User Guide, the first section “Basic information”
– know how to use this tool to perform PDI, maintenance, diagnostics, etc.
– only used for Jaguar Land Rover vehicles
– finish junior training of JLR diagnostic tools
– obey laws & rules of vehicle health and security in your areas
– obey all policies & procedures of the dealer repairing
JLR-DOIP-VCI-with-Pathfinder-download-3
Search your vehicle via VIN
JLR-DOIP-VCI-with-Pathfinder-download-4
Auto scan
JLR-DOIP-VCI-with-Pathfinder-download-5

JLR-DOIP-VCI-with-Pathfinder-download-6
Automatic ignition switch not supported
Click on OK
JLR-DOIP-VCI-with-Pathfinder-download-7

Vehicle information:
Land Rover Range Rover L405 (DoIP)
VIN: XXXXXXXX
YEAR: 2007
MILEAGE: 5804km
ENGINE: 306DT – V6 3.0 DIESEL
TRANSMISSION: Automatic
DRIVER: LHD(left-hand driver)
TYPE: 5 DOOR STATION WAGON
ACCESSORY: STANDARD
JLR-DOIP-VCI-with-Pathfinder-download-8

Go to ECU Diagnostics

Reading fault codes

JLR-DOIP-VCI-with-Pathfinder-download-9
JLR-DOIP-VCI-with-Pathfinder-download-10
Read All DTCs
JLR-DOIP-VCI-with-Pathfinder-download-11
Go to clear all DTCs
JLR-DOIP-VCI-with-Pathfinder-download-12
JLR-DOIP-VCI-with-Pathfinder-download-13
JLR-DOIP-VCI-with-Pathfinder-download-14
Then refresh DTCs
JLR-DOIP-VCI-with-Pathfinder-download-15
Done!

What vehicles that JLR DoIP VCI clone Pathfinder software works with: (14-16MY)
XE (X760)
F-Pace (X761)
F-Type (X152)
XF (X260)
XJ (X351) – 16MY only
Evoque (L538)
Discovery Sport (L550)
Range Rover (L405)
Range Rover Sport (L494)
Disclaimer: All about JLR DOIP VCI and Pathfinder here is China clone version. For original DOIP VCI, forget it.
Second, VXDIAG VCX NANO for Jaguar/Land Rover running SDD V145:
Released!
Obdii diagnostics, ECU programming…Works great!

What is VXDIAG VCX NANO Jaguar/Land Rover:
It’s an auto diagnostic/programming tool made by Allscanner, used for Jaguar/Land Rover cars to do basic obdii diagnostic and ECU programming.

How to use VXDIAG VCX NANO for Land Rover diagnostics:
Run JLR SDD, then click “SDD” to Login.

VXDIAG-VCX-NANO-Land-rover-1

After you see “The SPX – I – VIEW is connected” at the right corner, click “Continue”

VXDIAG-VCX-NANO-Land-rover-2

Auto VIN Read
VXDIAG-VCX-NANO-Land-rover-3
VXDIAG-VCX-NANO-Land-rover-4
Go to Diagnose
VXDIAG-VCX-NANO-Land-rover-5
Select symptom, SDD covers Chassis, power train, electrical and body

Here: select Powertrain – Engine system – Engine cooling, then click “Continue” to identify recommendations for selected symptoms.

VXDIAG-VCX-NANO-Land-rover-6

After complete identifying recommendations for selected symptoms, click on “Diagnose”.

VXDIAG-VCX-NANO-Land-rover-7

Click on “Diagnose”, select Powertrain – Engine system – Engine cooling, then click “Continue” to load recommended candidates.
VXDIAG-VCX-NANO-Land-rover-8

Select market specification, click “Save”, then go to analysing data…
VXDIAG-VCX-NANO-Land-rover-9

VXDIAG-VCX-NANO-Land-rover-10

Find out “Complete Vehicle – Clear all stored diagnostic trouble codes.”, click on “Run”
VXDIAG-VCX-NANO-Land-rover-11

Pop up “Ignition On Check”, click on “Continue”

VXDIAG-VCX-NANO-Land-rover-12

Clearing DTC.

VXDIAG-VCX-NANO-Land-rover-13

Get operation tips, continue

VXDIAG-VCX-NANO-Land-rover-14

Back to the menu, and select “Session”, then click on the “refresh” Icon

VXDIAG-VCX-NANO-Land-rover-16

Click “DTCs” to view fault codes read from vehicle.

Vxdiag Vcx Nano JLR car list:
Support Jaguar and Land Rover from 2005 to 2017
Land Rover: L316, L319, L320, L322, L359, L405,L494, L550, L538 vehicle lines
Jaguar: X100, X150, X152, X202, X250, X350, X351, X400 vehicle lines

(Solved) VXDIAG VX Manager license expiration 12/31/2020

Got everything up and running. I noticed the VX Manager license showed an expiration of 12/31/2020. That about right?

Replied:
Yea, about right, and when I was setting up TIS2000 and upgraded the license for it, noticed that it was slightly longer date than the initial nano license to start with when I was setting up T2w. So got a feeling that is only upgrades the license for so long from a given date,, but if you go in later, it will further the license by the same time frame for a later date instead.

The only really downside I see, is in GDS2 for the GM MDI side of things, and wondering if there is going to be any updates to the cracked version. Hence in GDS2, GM global 2016.4.0 , the latest corvette is the 2016 model, with nothing listed for 2017, nor 2018 models.

With any luck, they get the on cloud version completed for GM, and it will either have the updates, or at least allow you to use the online version for the 2017 and later GM models instead.

If you did not see the cloud version, go to VX manager, to the far right tab, and will bring you up to speed.

in detail…

VX Manager download:

https://mega.nz/#!esxVxIzb!h3CJbcyNG0u1OE_Tam978pygzfuKktQMrRCDcM9E0H8

Install the VX Manger

Install-VX-Manger-1

Install-VX-Manger-2
Connect your device. Open the VX Manager, and click VX Cloud. Then click 云诊断(Cloud Diagnosis)
Install-VX-Manger-3

Install-VX-Manger-4
Sign in, the User name is xinnuoyu, password is xinnuoyu, too.
Install-VX-Manger-5
You will enter to this interface.
Install-VX-Manger-6
Connect VXDIAG VCX NANO to your car, click your car brands, then click OPEN CLOUD. Here take Mazda as an example.

Install-VX-Manger-7

You will be connected to the cloud. Mazda IDS software will be there.

Install-VX-Manger-8

Open Mazda IDS, start new session, and choose all other. Try to see whether your car information is correct or not. You can start to use it now!

Install-VX-Manger-9

When you finish using it, close the upper window. Click OK and then left.
Install-VX-Manger-10

If your device is a multi one – VXDIAG multi diagnostic tool, and you want to do other car models. you can click Diagnostic Cloud Apps and choose the model you want.

Install-VX-Manger-11