Micropod 2 wiTechDRB3 Tests on 1997-2018 Chrysler Dodge Jeep Fiat

Look here: clone Chrysler wiTech MicroPod 2 test reports
Software to test with: wiTech and DRB3 software
Cars to test: 1997-2018 Chrysler, Dodge, Jeep, Fiat
Functions to test: basic diagnostics, key programming, reflash programming, module flashing, ABS bleeding

Test reports from users: (thanks for all the input)

2018 Jeep Wrangler:
FOBIK key programming done!
Car: 2018 JEEP WRANGLER 3.5L V6 24V WT ENGINE UPG I W/ESS

2016 Chrysler, Dodge, Jeep, Fiat:
100% CAN – equipped coverage to 2016 for Chrysler, Dodge, Jeep, and Fiat vehicle
Provide basic OBDII diagnosis
Have access to module for Re-Flash Programming, TSBs, wiring diagrams, and repair information.
Btw, wiTech ii supports chrysler and Fiat online programming, but the package from the vendor comes without  fiat software; i have my own micro pod 2 fiat software so that i can installation and programming. )

2015 Grand Cherokee:
Grand Cherokee 2015 RFHUB modify CRC and VIN
It’s really simple with micropod in offline mode . Just replace it …. and restor vehicle config.

2015 Chrysler 200:
The 2015 Chrysler 200, along with other Fiat-based models like the Jeep Renegade, Jeep Cherokee, and Ram Promaster, are all equipped with a rolling PIN Code.

Managed to program fobik with wiTECH app, when the 200 lost all keys

2015 RAM:
I traded in my 2015 RAM for a 2017 and confirmed that the wmicropod clone works with wiTech 17.04 patch level 11 works on my 2017 RAM.

I’ve heard rumblings that they changed things for the 2018 MY – doubt they will work.

2015 WK 3.6L and 2015 DS 5.7L:
I connected it to my 2015 DS and my wife’s 2015 WK with no issues. I disabled the side view mirror tilt in reverse on her WK (only thing she didn’t like about it) and she was thrilled. There are functions to bleed ABS, program tire sizes, etc. There are literally hundreds of sensor readings, dozens of tests, actuators and misc functions that you can perform that seem to be very vehicle specific – which you would expect. Every switch/gadget in the vehicle seems to have a corresponding sensor reading of some kind in the software. The only odd behavior I saw was when I connected to the ABS computer of my DS… the EVIC freaked out and started screaming to service the ABS. Maybe that is a safety feature of some kind so folks don’t go driving while messing with the ABS computer? Powering the vehicle off and on again made the ABS warning go away. I could not find any “PROXI alignment” functions – maybe they don’t apply to my vehicles?

2014 dodge avenger:
One vehicle i tested with: a 2014 dodge avenger …. just fine.
was able to flash a module update and program a new key with the unit.
try the emulator on: DRB III emulator confirmed working.

2010 Charger:
I tested it on a 2010 Charger under witech and works flawlessly

2006 Jeep Liberty:
2006 Jeep Liberty CRD Limited 4X4
I ordered a witech micropod 2 clone with drb3 functionality.
MicroPod II comes with version 17.04.27 software, drb3 support is not installed automatically but can still be found after install. Says it’s good for offline use only, but that should be enough to mess with the TPMS.
All modules except the BCM and ABS computer are still compatible with the DRBIII on the 06’s.

This is a working offline Witech. I just got it connected successfully. Software V17.04.27 was installed on a Windows 7 laptop no problem. It did successfully populate the VIN and can read the ECU.

2004 Dodge:
got a 2004 Dodge pickup and under the emulator worked perfectly.

2003 PT Cruiser:
Basically no other modules other than the Engine, work. I cannot connect to the transmission, ABS, VTSS, SKIM, radio, cluster, etc. But everything in the engine module can be tested, actuated, etc.
Luckily for me, I really only needed the DRBIII to write the Pinion factor for manual transmissions, which is conveniently in the ‘engine’ part which works.
Maybe I really need to invest in an older VCI pod so that everything else works.

Chrysler after 2003:
Micropod 2 with wiTECH only works for Chrysler made after the year 2003

old Chysler 1997 – 2004 (2005):
Micropod 2 work well with DRBIII emulator for old Chysler the year 1997 – 2004 (2005)

Good to know: When to use DRB3 & when to use wiTech?
The DRB3 emulator is part of Chrysler’s Witech software. The Witech software supports two different pass-through devices, The VCI pod which is sold with the Witech system and the Chrysler Starmobile. The DRB3 emulator is a convenience item for dealerships to allow the use of their current witech scan-tool on older non CAN bus vehicles. It is not by any means a cost saving option.

Attachment: Micropod 2 DRB 3 Emulator Car List:
DRB 3 supports Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007

Images: cloned Micropod 2 full kit

witech-micropod2-full-kit-1 witech-micropod2-full-kit-2 witech-micropod2-full-kit-3 witech-micropod2-full-kit-4 witech-micropod2-full-kit-5

wiTECH VCI Pod Vs wiTech MicroPod 2

wiTECH VCI Pod wins wiTech MicroPod 2 in the built-in DRB III emulator ( which is far more stable). wiTech MicroPod two is claimed to work fine with the DRB III emulator, but not contained inside the package you will need to obtain your very own.

For Programming:
Chrysler wiTech MicroPod 2 wins in on line and offline programming etc.
wiTECH VCI Pod wins in crucial programming.

wiTech-MicroPod-2

118.four MB

*** Please use the free source at your own personal danger, nobody will take responsibilities for any danger.

For sake of security, you will be advised to work with the stable a single wiTECH VCI Pod with built-in DRB III emulator or obtain your own 1 to function with the low-cost wiTech MicroPod 2

What is DRB III emulator?
DRB III Emulator may be the exact scan tool application application made use of in Chrysler, Jeep, and Dodge dealerships to service non-CAN primarily based vehicles from 1998-2007. The DRB III Emulator application application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to allow all the functions on the original Chrysler DRB III Scan Tool and much more. This application package even comes with non-powertrain ECU programming files to allow reflashing all the things from BCMs to sliding door modules.

The best way to set up DRBIII Emulator?
For making use of DRBIII Emulator application with tools like VCI pod or Micropod II with witech version 14.xx.xx – 17.xx.xx, it depends upon your device (clone or orig / old or newer release) and ONLY Right after that, set up DRBIII Emulator.

DRBIII-Emulator

Right here a Micropod II user who’re fortunate to obtain the package with DRBIII Emulator, and he shared his productive expertise on how to set up DRBIII Emulator.
1: Get started having a fresh install of Windows 7 Pro 32-bit.
2: Install all of the important drivers for your laptop.
three: Set the clock to the current date and time. (It didn’t perform when set to 01/01/2017)
4: Connect to WiFi and performed all necessary Windows Updates.
5: Copy the “wiTECH_Install_17.03.01” folder to the desktop.
6: Install the supplied version Adobe AIR.
7: Set up the offered version of Java.
eight: Install wiTECH 17.03.01.
9: Following you have got finished installed every thing, whenever you get popup messages from Windows Firewall to allow or block any applications, click “Allow”.
ten: After you get a popup for AdobeAIR and Java to update, click cancel and usually do not update either AdobeAIR or Java.
11: Open “My Computer” and inside the upper left of the window, click on “Organize” and after that select “Folder and search options”.
12: Click around the “View” tab and beneath “Hidden files and folders” pick the radio button for “Show hidden files, folders and drives”. Also, uncheck the choice for “Hide protected operating program files (Suggested)” and after that in the leading with the window, click the “Apply to Folders” button.
13: Navigate to “C:\ProgramData\wiTECH\jserver\data\core\stubs” and you’ll uncover three installers.
14: Set up the DRBIII Emulator stub.
15: Wait for a popup to appear that states the security certificate isn’t valid and click “OK” to let the software update to proceed. Another popup will seem and the software update will run. Following it completes, close the wiTECH window if it opens.
16: Set up the Enhanced DRBIII emulator stub.
17: Again, wait to get a popup to appear that states the security certificate is not valid and click “OK” to allow the application update to proceed. A further popup will seem along with the computer software update will run. After it completes, close the wiTECH window if it opens.
18: Install the K-Line stub.
19: Once more, wait for a popup to seem that states the safety certificate isn’t valid and click “OK” to enable the computer software update to proceed. Another popup will appear and also the application update will run. Immediately after it completes, close the wiTECH window if it opens.
20: Connect the MicroPod2 towards the vehicle, then connect it to the pc.
21: A popup window will seem to set up computer software. Click “OK”.
22: After it finishes, start wiTECH 17.03.01 and wait for the screen to show up with the MicroPod2 and IP address of it. You will see a “Launch DRBIII” button within the lower ideal corner. Ignore it as they don’t adequately open the emulator.
23: Produce a shortcut on the desktop and enter the following in to the ‘Path” field.
24: Disable the LAN and WLAN network connections and in no way connect to the web once more.
25: Click around the shortcut and you’re set! The Auto Scan Tool DRBIII emulator will open and give you the decision to choose various diverse cars.

More……

VCI Pod + DRB III Emulator Logging and Wireshark dump

High-quality witech micropod system vs. bad micropod 2 china clone

Here’s a comparison chart of genuine vs. clone wiTech MicroPod 2 system, incl. High-quality witech micropod system vs. bad micropod 2 china clone.

Genuine WiTech Micropod2 vs. Clone wiTech Micropod II

4-1

4-2 4-3 4-4

witech micropod2 for sale:

http://www.obd2tool.com/goods-5172-wiTech+MicroPod+2+for+Chrysler+Diagnostic+Tool.html

4-5

– the copy is 1:1 of the genuine, of high quality and good stability, its connector matches the car OBD plug perfectly.

– With high-quality USB cable which transfer data stably and reliably

– The package is anti-static, moisture-proof, anti-electromagnetic interference

– Workable with your current wiTECH software

– No smart cables required

– No drivers needed

micropod 2 ebay?

Ebay should be a good place to buy items. But for professional vehicle diagnostic tools, a site with experienced experts and technical support teams like www.obd2tool.com

witech micropod II HQ Clone Customer Review:
Just ordered a chinese clone MicroPod II and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from Chrysler). For now it works fine.

I have tested Dodge also. I just used it on a 2014 dodge avenger just fine.

I don’t have experience with Windows XP. This version of Witech works fine on Windows 7 and Windows 10.

I have also uploaded pictures of the internals for those who are curious.

4-6 4-7 4-8 4-9 4-10

witech software download:

http://cheapobd2tool.com/2017/09/13/free-download-v17-03-01-witech-micropod-2-for-chrysler/

micropod 2 login, setup

http://cheapobd2.com/2017/09/13/how-to-set-up-witech-micropod-2-chrysler-diagnostic-tool/

witech micropod 2 review:

http://forobd2tool.com/blog/2017/09/13/review-on-chrysler-witech-micropod-2-diagnostic-system/

How to use Chrysler wiTech MicroPod 2 Diagnostic Programming Tool ?

1. Please confirm that you have successfully installed the software.

If you don’t know how to install Chrysler wiTech MicroPod 2 software, please check this link:

http://www.obd2tool.com/blog/2017/05/12/how-to-install-chrysler-witech-micropod-2-diagnostic-programming-tool/

2.Connect Chrysler wiTech MicroPod 2 USB Port with PC, OBD2 Port connect with car.

3.The computer will automatically install Chrysler wiTech MicroPod 2 hardware driver

11

12

4.After Drive installed, you can find your device in your computer device manager

13

5.Double click the icon of Chrysler wiTech MicroPod 2

14

6.You will see Chrysler wiTech MicroPod 2 connected with software, Please click ” next”

15

7. If you have your personal online account, you can login in your user id and password. If you don’t have online account, please select “word off line”,Then click “finish” and go to next step

16

8. Select ” Connect”
17

18

9. To this step, you can choose the type of car which you want to test and the system for diagnosis and programming.

Posted in Car Diagnostic Tools | Tagged , , , | Comments Off

How to install Chrysler wiTech MicroPod 2 Diagnostic Programming Tool?

WARNING; The computer on the day of the date

1.PC-Based: Requires PC connected to the network

1

2.Run Chrysler wiTech MicroPod 2 CD software as picture

2

3.Firstly, installation AdobeAIRInstaller.exe

3

4.Secondly, installation jre-6u45-windows-i586.exe

4

5. Finally, installation wiTECH_Install_17.03.10.exe

5

6.After successful to install the software, the desktop will appear Chrysler wiTech MicroPod 2 software icon is as follows:

6

7. The specific installation process, please watch the following installation video: